• センサ、タッチセンサの日本語ページ
  • sensor,touch sensor English site
How It Works Shipping Fee Terms of Use

Model CCS-CR25V Electrostatic-capacity cylindrical proximity sensor

Application

  • Chemicals and water level detection inside tanks
  • Presence detection of food within the package
  • Detection of the liquid in the PET bottle or in paper pack

Features

  • High-sensitivity long-distance electrostatic-capacity proximity sensor that can detect almost any target regardless of the material.
  • Cylindrical type (ø34) with a dedicated installation jig for easy installation and position adjustment.
  • Can detect indirectly objects with high permittivity through plastic cases or other containers.
  • Equipped with a 15-turn trimmer potentiometer to adjust the sensitivity.
  • Can be installed to locations where water, oil, or other liquids may splash thanks to its waterproof construction.
    (However, note that the sensor cannot be used if water or oil adheres to the detection surface.)

International Standards

  • Our products do not have overseas safety regulations such as CE mark, UL standard, EN standard etc.
  • Products is compliant to the RoHS directive.

Rating and performance / Characteristics graph

Rating and performance

Model name CCS-CR25V CCS-CR25V1
Detection surface Front side detection
Detection distance 25 mm
Hysteresis 10% or less of the detection distance
Detection distance
variable range
5.0 to 25.0 mm
Standard detection
target
Grounded metal of 50 × 50 mm and 1 mm in thickness
Power supply voltage 12 V to 24 V DC, ripple 10% or less (Operating voltage range: 10 V to 30 V DC)
Power consumption DC 10 mA or less (with DC 24 V)
Output DC 30 V DC 100 mA or less NPN transistor open collector
Output residual voltage DC 1 V or less ( load current DC 100 mA )
Operation configuration Normally open
(On output with detection target)
Normally closed
(Off output with detection target)
Operation display Red LED (lit when On output)
Response frequency 70 Hz or more
Operating temperature
range
-10 to 55 °C (-15 to 60 °C during storage)
Operating humidity
range
35 to 95% RH (35 to 95% RH during storage)
Withstand voltage 1 min at AC 500 V 50/60 Hz (between the live part and case)
Insulation resistance 50 MΩ or more measured with an ohmmeter at DC 500 V
(between the live part and case)
Vibration resistance Durability: 2 hours in each X, Y, Z direction at 10 to 55 Hz and with peak-to-peak amplitude of 1.5 mm (at power off)
Shock resistance Durability: 3 times at 500 m/s² (approx. 50 G) in each X, Y, Z direction
(at power off)
Protection rating IP66
Case material PBT
Cable ø6, 3-core round cord of 0.5 mm² and 1 m in length (oil and heat resistant)
Weight Approx. 92 g (without accessories)
Accessories Installation tool set: 2 pan head screws M5 x 55 mm, 1 slotted screwdriver for adjustment

*For a detailed specification of the other, please refer to specifications.

Characteristics graph (typical example)

CCS-CR25V_Characteristics_graph_(typical_example).gif

External dimensions diagram / Output circuit

External dimensions diagram

CCS-CR25V_External_dimensions_diagram.gif

Output circuit

CCS-CR25V_Output_circuit.gif

Usage precautions

Influence of surrounding metal

If there are metal objects around the proximity sensor, leave at least the space indicated in the figure below between them and the sensor.
 
CCS-CR25V_Influence_of_surrounding_metal.gif

Mutual interference

If you use two or more of the same product, separate them at least by the distances shown in the figure below to prevent reciprocal interference.

CCS-CR25V_Mutual_interference.gif

Installation

Tighten the case with a torque of 0.5 N.m or less.

Other

See proximity sensor general usage precautions for other precautions.

 

*After you have put an item in your shopping cart, choose either [Quote] or [Order].
*For customized products or specifications, contact us using "Inquiry."
*Choose the currency from JPY, USD, or EUR.

Model Name Output configuration Standard Price Inventory Type Select
CCS-CR25V Normally open
6,110 JPY
57 USD
54 EUR
BTO
CCS-CR25V1 Normally closed
6,110 JPY
57 USD
54 EUR
BTO

STD Shipping is available immediately (on the day of order)

WIP Shipping is available within 1 to 3 weeks

BTO Shipping is available within 4 to 10 weeks

NOTE: The above information shows the typical delivery time. For actual delivery time, please confirm us as it depends on our business days and/or product quantities.

In the case of the quote request and order, please be sure to check the Terms and Conditions.
If you have made the procedure of quote request and order, it assumes that agree to the Terms and Conditions.

Go to page top