How It Works Shipping Fee Terms of Use

Model MGP-CN202D/CS202D Cylindrical DC 2-wire Electromagnetic Sensor

Application

  • Positioning of the machine or the like using a magnet
  • Positioning of the moving object, such as in an atmosphere of intense shock
  • Position detection of the moving table or the like and workpiece

Features

  • DC two-wire type (Load resistance required).
  • N pole detection models and S pole detection models are available. Select the model depending on your usage.
  • Operation can be easily checked with the operation display light.

International Standards

  • Our products do not have overseas safety regulations such as CE mark, UL standard, EN standard etc.
  • Products is compliant to the RoHS directive.

* Please consult about "change of specification" and "request of specification" of the product.

Rating/Performance

Rating / Performance

Model MGP-CN202D MGP-CS202D
Detection Surface Front side detection
Detection Sensitivity 2 mT or less
Power Supply Voltage 12 V to 24 V DC (Operating voltage range : 10 V to 26.4 V DC)
Power Consumption Leakage current : 1 mA DC or less (At 25 ℃)
Lord Current 5 to 20 mA DC(At 25℃)
Output Residual Voltage 4.5 V DC or less (Load current 20 mA DC)
Operation Configuration Normally open (On with magnetic field)
Operation Display Red LED (Lit when On output)
Response Time 100 ms or less
Detection Polarity N pole S pole
Operating Temperature
Range
-10 to 60 °C (-25 to 65 °C during storage)
(Without dew condensation or freezing)
Operating Humidity
Range
90% RH or less (90% RH or less during storage)(Without dew condensation)
Withstand Voltage 1 min at 500 V AC 50/60 Hz (Between the live part and case)
Insulation Resistance 100 MΩ or more measured with an ohmmeter at 500 V DC
(Between the live part and case)
Vibration Resistance Durability : 2 hours in each X, Y, Z direction at 10 to 55 Hz and with peak-to-peak amplitude of 1.5 mm (At power off)
Shock Resistance Durability : 3 times at 500 m/s² (approx. 50 G) in each X, Y, Z direction
(At power off)
Protection Rating IP65
Case Material ABS (Nut : ABS/PC composite resin)
Cable ø4, 2-core round cord of 0.2 mm², 2 core and 2 m in length (Oil and heat resistant)
Weight Approx. 46 g

 

External Dimensions Diagram / Output Circuit

External Dimensions Diagram

MGP-CN202D_CS202D_External_dimensions_diagram.gif

Output Circuit

MGP-CN202D_CS202D_Output_circuit.gif

Usage Precautions

  • If there are magnetic objects on or around the installation location of the electromagnetic sensor, keep a distance between the sensor and these objects greater than the distance between the sensor and the magnet tape. Check also carefully the detection characteristics before using the sensor.
  • If there is magnetic metal with residual magnetism in the surroundings of the electromagnetic sensor installation location, the detection characteristics may greatly vary. Verify the detection characteristics before using the sensor.
  • Tighten the sensor using the nuts supplied with a torque of 0.5 Nm or less.
  • Always use the 2-wire type sensors via the load.
  • See Electromagnetic sensor general usage precautions for other precautions.

 

Other

Connection Example

MGP-CN202D_CS202D_Connection_example.gif

Load Current Curve

MGP-CN202D_CS202D_Load_current_curve.gif

Reference Detection Distances

MGP-CN202D_CS202D_Reference_detection_distances.gif

*After you have put an item in your shopping cart, choose either [Quote] or [Order].
*For customized products or specifications, contact us using "Inquiry."
*Choose the currency from JPY, USD, or EUR.

Model Name Detection polarity Standard Price Inventory Type Select
MGP-CN202D N pole
38 USD
35 EUR
STD
MGP-CS202D S pole
38 USD
35 EUR
STD

STD Shipping is available immediately (on the day of order)

WIP Shipping is available within 1 to 3 weeks

BTO Shipping is available within 10 to 18 weeks

NOTE: The above information shows the typical delivery time. For actual delivery time, please confirm us as it depends on our business days and/or product quantities.

In the case of the quote request and order, please be sure to check the Terms and Conditions.
If you have made the procedure of quote request and order, it assumes that agree to the Terms and Conditions.

Part number index

Product Comparison Table

confirmation of the estimate request content

Electromagnetic sensor

Go to page top