• センサ、タッチセンサの日本語ページ
  • sensor,touch sensor English site
How It Works Shipping Fee Terms of Use

Model MGP-C☐701 High-sensitivity electromagnetic sensor

Application

  • Magnet detection
  • Automatic guided vehicles guidance

Features

  • Uses a magnetism focusing construction (patented) that makes it particularly strong against ambient temperatures.
  • The magnetism focusing construction is very useful as the sensor can detect at a long distance targets with a wide surface but a weak magnetic flux, like belt-shaped rubber magnets.
  • N pole, S pole and Bipolar detection models are available. Select the model depending on your usage.
  • Operation can be easily checked with the operation display light.
  • Equipped with protection diodes to protect the sensor from reverse connection to the power supply and output surges.
  • This is the equivalent of other company detection sensitivity 500μT.

International Standards

  • Our products do not have overseas safety regulations such as CE mark, UL standard, EN standard etc.
  • Products is compliant to the RoHS directive.

* Please consult about "change of specification" and "request of specification" of the product.

Rating and performance

Rating and performance

Model name MGP-CN701 MGP-CS701 MGP-CW701
Detection surface Front side detection
Detection sensitivity 700 μT ±100 μT 700 μT ±150 μT
Power supply voltage 12 V to 24 V DC (Operating voltage range: 10 V to 30 V DC)
Power consumption DC 20 mA or less
Output DC 30 V DC 50 mA or less NPN transistor open collector 
Output residual voltage DC 1 V or less ( load current DC 50 mA )
Operation configuration Normally open (On output with magnetic field)
Operation display Red LED (lit when On output) LED    Red with N pole detection
           Green with S pole detection
Response time 300 μs or less
Hysteresis 75 μT or less
(with a rubber plate magnet of 30 x 30 x t1.5 mm)
100 μT or less
(with a rubber plate magnet of
30 x 30 x t1.5 mm)
Detection polarity N pole S pole N pole and S pole
Reference detection
distances
42 mm (*the MG50-1 series)
Operating set distance 5 to 30 mm (*the MG50-1 series)
Operating temperature
range
-10 to 60 °C (-20 to 65 °C during storage)
Operating humidity
range
90% RH or less (90% RH or less during storage)
Withstand voltage 1 min at AC 500 V 50/60 Hz (between the live part and case)
Insulation resistance 100 MΩ or more measured with an ohmmeter at DC 500 V
(between the live part and case)
Vibration resistance Durability: 2 hours in each X, Y, Z direction at 10 to 55 Hz and with peak-to-peak amplitude of 1.5 mm (at power off)
Shock resistance Durability: 3 times at 500 m/s² (approx. 50 G) in each X, Y, Z direction
(at power off)
Protection rating IP65
Case material ABS (nut ABS/PC composite)
Cable ø4 round cord of 0.2 mm² and 1 m in length (oil and heat resistant)
Number of cable core 3-core 4-core
Weight Approx. 30 g

*For a detailed specification of the other, please refer to specifications.

External dimensions diagram / Output circuit

External dimensions diagram

MGP-CN701_CW701_External_dimensions_diagram.gif

Output circuit

MGP-CN701_CS701_Output_circuit.gif


MGP-CW701_Output_circuit.gif

Usage precautions

  1. If there are magnetic objects on or around the installation location of the electromagnetic sensor, keep a distance between the sensor and these objects greater than the distance between the sensor and the magnet tape. Check also carefully the detection characteristics before using the sensor.
  2. If there is magnetic metal with residual magnetism in the surroundings of the electromagnetic sensor installation location, the detection characteristics may greatly vary. Verify the detection characteristics before using the sensor.
  3. Tighten the sensor using the nuts supplied with a torque of  0.5 Nm.
  4. See Electromagnetic sensor general usage precautions for other precautions.

 

Detection area diagram

Detection area diagram

MGP-CN701_CS701_Detection_area_diagram.gif


MGP-CW701_Detection_area_diagram.gif

*After you have put an item in your shopping cart, choose either [Quote] or [Order].
*For customized products or specifications, contact us using "Inquiry."
*Choose the currency from JPY, USD, or EUR.

Model Name Detection polarity Standard Price Inventory Type Select
MGP-CN701 N pole
3,860 JPY
36 USD
32 EUR
STD
MGP-CS701 S pole
3,860 JPY
36 USD
32 EUR
STD
Model Name Standard Price Inventory Type Select
MGP-CW701
5,110 JPY
48 USD
42 EUR
STD

STD Shipping is available immediately (on the day of order)

WIP Shipping is available within 1 to 3 weeks

BTO Shipping is available within 4 to 10 weeks

NOTE: The above information shows the typical delivery time. For actual delivery time, please confirm us as it depends on our business days and/or product quantities.

In the case of the quote request and order, please be sure to check the Terms and Conditions.
If you have made the procedure of quote request and order, it assumes that agree to the Terms and Conditions.

Go to page top