Model MGA-F*501MC High-sensitivity Digital/Analog Output Electromagnetic Guide Sensor
- Product catalog download
- 3D PDF Download
- MGA-F□501MC Download the CAD data (DXF / Parasolid / STEP / IGES)
Application
- Automatic guided vehicles guidance
Features
- Three selectable modes: straight line, right turnout and left turnout.
- Analog output proportional to the deviation between the guide tape and the automatic guided vehicle (AGV).
- Output a signal when the automatic guided vehicle (AGV) leave the guided tape line.
International Standards
- Our products do not have overseas safety regulations such as CE mark, UL standard, EN standard etc.
- Products is compliant to the RoHS directive.
* Please consult about "change of specification" and "request of specification" of the product.
Rating / Performance / Characteristics Graph
Rating / Performance
| Model | MGA-FN501MC | MGA-FS501MC |
|---|---|---|
| Detection Surface | Front side detection | |
| Detection Sensitivity | 500 μT ± 100 μT (With a rubber plate magnet of 30 × 30 × t1.5 mm) | |
| Power Supply Voltage | 10.8 V DC or more to 36 V DC or less, Ripple 5% or less | |
| Power Consumption | 140 mA DC or less (With 12 V DC), 80 mA DC or less (With 24 V DC) | |
| Output | Analog output: 0 V to 8 V DC, output impedance 10 Ω, allowable load resistance 2 kΩ or more Digital output: 30 V DC 50 mA DC or less NPN transistor open collector |
|
| Output Residual Voltage | Digital output 0.5 V DC or less (Load current 50 mA DC) | |
| Derailment Alarm Output | *"H" output when D·R, Analog output 0 V DC | |
| Number of Detection Points and Pitch |
15 point / 10mm | |
| Response Time | 5 ms or less | |
| Hysteresis | 30 μT or less (With a rubber plate magnet of 30 × 30 × t1.5 mm) | |
| Reference Detection Distances |
47 mm (*For the MG50-1 series) | |
| Operating Set Distance | 5 to 35 mm (*The MG50-1 series) | |
| Detection Polarity | N pole | S pole |
| Operating Temperature Range |
-10 to 60 °C (-20 to 70 °C during storage) (Without dew condensation or freezing) |
|
| Operating Humidity Range |
95% RH or less (95% RH or less during storage) (Without dew condensation) | |
| Withstand Voltage | 1 min at 500 V AC 50/60 Hz (Between the live part and case) | |
| Insulation Resistance | 100 MΩ or more measured with an ohmmeter at 500 V DC (Between the live part and installation bracket part) |
|
| Vibration Resistance | Durability: 2 hours in each X, Y, Z direction at 10 to 55 Hz and with peak-to-peak amplitude of 1.5 mm (At power off) | |
| Shock Resistance | Durability: 3 times at 500 m/s² (approx. 50 G) in each X, Y, Z direction (At power off) |
|
| Protection Rating | IP67 | |
| Case Material | Case: ABS, aluminum plate t1.5 (Anodized aluminum, black) | |
| Cable | ø7.2, 6-core (shielded strands) round cord of 0.5 mm² and 1 m in length (Oil resistant) |
|
Branch Control
| SEL1 | L | L | H | H |
|---|---|---|---|---|
| SEL2 | L | H | L | H |
| Mode | Straight mode | Right branch mode | Left branch mode | Disabled |
L = 0 V connection , H = Terminal open
Typical Example of Deviation Output Characteristics and Gate Output Characteristics (With MG50 and Operation Distance of 30 mm)
External Dimensions Diagram / Output Circuit
External Dimensions Diagram
Output Circuit
*See General usage precautions for automatic guided vehicles electromagnetic sensors for the usage precautions.
*After you have put an item in your shopping cart, choose either [Quote] or [Order].
*For customized products or specifications, contact us using "Inquiry."
*Choose the currency from JPY, USD, or EUR.
| Model Name | Detection polarity | Standard Price | Inventory Type | Select |
|---|---|---|---|---|
| MGA-FN501MC | N pole |
398 USD
368 EUR
|
BTO | |
| MGA-FS501MC | S pole |
398 USD
368 EUR
|
BTO |
STD Shipping is available immediately (on the day of order)
WIP Shipping is available within 1 to 3 weeks
BTO Shipping is available within 10 to 18 weeks
NOTE: The above information shows the typical delivery time. For actual delivery time, please confirm us as it depends on our business days and/or product quantities.
In the case of the quote request and order, please be sure to check the Terms and Conditions.
If you have made the procedure of quote request and order, it assumes that agree to the Terms and Conditions.
