How It Works Shipping Fee Terms of Use

Model MGM-3*401-PC High-sensitivity Multi-type Magnetic Guide Sensor

Application

  • Automatic guided vehicles guidance

Features

  • High-sensitivity magnetic sensor that detects the magnetism at three points.
  • Perfect as a guide sensor for automatic guided vehicles (AGV). The sensitivity can be lowered to adapt to the usage environment.
  • Open collector output to output directly to digital circuits.
  • PCB not enclosed in a case to increase the mounting possibilities.

International Standards

  • Our products do not have overseas safety regulations such as CE mark, UL standard, EN standard etc.
  • Products is compliant to the RoHS directive.

* Please consult about "change of specification" and "request of specification" of the product.

Rating / Performance

Rating / Performance

Model MGM-3N401-PC MGM-3S401-PC
Detection Surface Front side detection
Detection Sensitivity 400 μT ± 100 μT (With a magnet tape of 30×30×t1.5mm)
Power Supply Voltage 12 V to 24 V DC (Operating voltage range: 10 V to 30 V DC)
Current Consumption 50 mA DC or less
Output 30 V DC 100 mA DC or less NPN transistor open collector 
Output Residual Voltage 1 V DC or less (Load current DC100 mA)
Operation Status Normally open (On output with magnetic field)
Operation Indicator Red LED (Lit when On output)
Number of Detection
Points / Pitch
3 point / 24 mm
Response Time 500 μs or less
Hysteresis 30 μT or less (With a magnet tape of 30×30×t1.5mm)
Typical Detection
Distances
64 mm (*With MG50-1 series)
Operating Set Distance 5 to 45 mm (*With MG50-1 series)
Detection Polarity N-pole S-pole
Temperature Range
-10 to 60 °C (-20 to 70 °C during storage)(Without dew condensation or freezing)
Humidity Range
90% RH or less (90% RH or less during storage) (Without dew condensation)
Vibration Resistance  10 to 55 Hz, 1.5mm double amplitude in X, Y, and Z directions for 2 hours each (at power off)
Shock Resistance  500 m/s² (Approx. 50 G) in  X, Y, and Z directions 3 times each (at power off)
Connector Connector: SMR-05V-N (5-pin)(from J.S.T. Mfg. Co., Ltd.)
[Connections]Housing: SMP-05V, Contact: SHF-001T-0.8BS
(from J.S.T. Mfg. Co., Ltd.)

*For a detailed specification of the other, please refer to specifications.

Output Dimensions / Output Circuit

Output Dimensions

MGM-3□401__PC_外形寸法図.jpg

Output Circuit

MGM-3□401_MC_PC_回路図.jpg

Precautions During Use

  1. Use non-magnetic metal for the mounting screw and the casing.
  2. When using a metal casing, pay attention that the PCB and the parts do not contact.
  3. Note that the sensor may not operate correctly when the sensitivity is high due to ambient temperature change and magnetic noise.
  4. See General Precautions During Use for automatic guided vehicles magnetic sensors for other precautions.

*After you have put an item in your shopping cart, choose either [Quote] or [Order].
*For customized products or specifications, contact us using "Inquiry."
*Choose the currency from JPY, USD, or EUR.

Model Name Detection polarity Standard Price Inventory Type Select
MGM-3N401-PC N pole
85 USD
79 EUR
BTO
MGM-3S401-PC S pole
85 USD
79 EUR
BTO

STD Shipping is available immediately (on the day of order)

WIP Shipping is available within 1 to 3 weeks

BTO Shipping is available within 10 to 18 weeks

NOTE: The above information shows the typical delivery time. For actual delivery time, please confirm us as it depends on our business days and/or product quantities.

In the case of the quote request and order, please be sure to check the Terms and Conditions.
If you have made the procedure of quote request and order, it assumes that agree to the Terms and Conditions.

Part number index

Product Comparison Table

confirmation of the estimate request content

Electromagnetic sensor for automatic guided vehicles (AGV)

Go to page top