Model MS-7H High-sensitivity Inductive Sensor
- Product catalog download
- 3D PDF Download
- MS-7H_EN Download the CAD data (DXF / Parasolid / STEP / IGES)
Application
- Iron sheet detection
- Positioning of the processing machines
- Coin and medal detection
- Metal steel balls detection
- Metal detection in a narrow space
Features
- Minimized effect on sensitivity in the event of unexpected condensation.
- Features a keyway on the case side for an easy mounting in one touch.
- You may also use the mounting bracket (Sold separately).
International Standards
- Our products do not have overseas safety regulations such as CE mark, UL standard, EN standard etc.
- Products is compliant to the RoHS directive.
* Please consult about "change of specification" and "request of specification" of the product.
Rating / Performance / Characteristics Graph
Rating / Performance
| Model | MS-7H5 | MS-7H15 | MS-7H | MS-7H1 |
|---|---|---|---|---|
| Detection Surface | Upper side detection | |||
| Detection Distance | 7.5 mm ± 0.5mm (Detection Target : Iron sheet of 20 × 20 mm and 1 mm in thickness) | |||
| Hysteresis | 15 % or less of the detection distance | |||
| Set Distance | 0 to 6.0 mm | |||
| Power Supply Voltage | 5 V DC (Operating voltage range: 4.5 V to 10 V DC) |
12 V to 24 V DC (Operating voltage range: 9 V to 33 V DC) |
||
| Current Consumption | 4 mA DC or less | 5 mA DC or less | ||
| Output | NPN transistor open collector 5 V DC : 33 V DC 80 mA DC or less , 12 / 24 V DC : 33 V DC 100 mA DC or less |
|||
| Output Residual Voltage | 1 V DC or less (Load current 5 V DC : 80 mA DC , 12 / 24 V DC : 100 mA DC ) | |||
| Operation Status | Normally open (ON output when detecting) |
Normally closed (OFF output when detecting) |
Normally open (ON output when detecting) |
Normally closed (OFF output when detecting) |
| Operation Indicator | Green LED (Lit when the output is ON) | |||
| Response Frequency | 500 Hz or more | |||
| Temperature Range | -25 to 80 °C (-25 to 80 °C storage temperature range)(Without dew condensation or icing) | |||
| Humidity Range | 25 to 85 % RH (25 to 85 % RH storage humidity range)(Without dew condensation) | |||
| Dielectric Strength | 500 V AC for 1 minute (Between the live part and case) | |||
| Insulation Resistance | 50 MΩ or more at 500 V DC megger (Between the live part and case) | |||
| Vibration Resistance | 10 to 55 Hz, 1.5 mm double amplitude in X, Y and Z directions for 2 hours each (at power off) | |||
| Shock Resistance | 1,000 m/s² (Approx. 100 G) in X, Y and Z directions 10 times each (at power off) | |||
| Anti-static Electricity | 15 kV between the outside coating and electrode (Discharge capacity: 150pF, discharge resistance: 330Ω) Only at the detection surface side | |||
| Protection | IP50 | |||
| Case Material | Case: ABS resin with glass (Black), Cover:PC (Transparent) | |||
| Connector | Connector : S3B-ZR (3-pin) (from J.S.T. Mfg. Co., Ltd.) Housing : ZHR-3, Contact : SZH-002T-P0.5 (from J.S.T. Mfg. Co., Ltd.) |
|||
| Weight | Approx. 4.2 g | |||
| Options (Sold Separately) |
Mounting bracket : PMS-5TS, Connector harness : SZH-3-300 | |||
Characteristics Graph (Typical Example)
Outline Dimensions / Options / Output Circuit
Outline Dimensions
Mounting Bracket (Sold Separately)
Connector Harness (Sold Separately)
Output Circuit
*1. The 5V DC type has no reverse connection protection diode built-in. Be sure to pay careful attention to the polarity of the power supply.
Precautions During Use
Influence of Surrounding Metal
Do not place metal objects around the inductive sensor, i.e. within 30 mm from the detection surface,10 mm from the front side, or 10 mm from the sides. Otherwise, the detection distance may increase or other malfunctions may occur. Also, if there are surrounding metals on two or more sides including the side surface, please contact us in advance.
Mutual Interference
When using multiple sensors side by side, separate them at least by the distances shown in the figure below to prevent mutual interference. (The different frequency model type has “B” at the end of its model designation.)
Mounting
Note that this sensor cannot be mounted on metal surfaces.
Other
See inductive sensor general Precautions During Use for other precautions.
Reference Operating Sensitivity
Reference Operating Sensitivity
*After you have put an item in your shopping cart, choose either [Quote] or [Order].
*For customized products or specifications, contact us using "Inquiry."
*Choose the currency from JPY, USD, or EUR.
| Model Name | Power supply voltage | Operation Configuration | Standard Price | Inventory Type | Select |
|---|---|---|---|---|---|
| MS-7H | 12 V to 24 V DC | Normally open |
6 USD
6 EUR
|
BTO | |
| MS-7HB | 12 V to 24 V DC | Normally open |
6 USD
6 EUR
|
BTO | |
| MS-7H1 | 12 V to 24 V DC | Normally closed |
6 USD
6 EUR
|
BTO | |
| MS-7H1B | 12 V to 24 V DC | Normally closed |
6 USD
6 EUR
|
BTO | |
| MS-7H5 | 5 V DC | Normally open |
6 USD
6 EUR
|
BTO | |
| MS-7H5B | 5 V DC | Normally open |
6 USD
6 EUR
|
BTO | |
| MS-7H15 | 5 V DC | Normally closed |
6 USD
6 EUR
|
BTO | |
| MS-7H15B | 5 V DC | Normally closed |
6 USD
6 EUR
|
BTO |
STD Shipping is available immediately (on the day of order)
BTO Shipping is available within 14 to 18 weeks
NOTE: The above information shows the typical delivery time. For actual delivery time, please confirm us as it depends on our business days and/or product quantities.
In the case of the quote request and order, please be sure to check the Terms and Conditions.
If you have made the procedure of quote request and order, it assumes that agree to the Terms and Conditions.
