Model MGM-8*501-MC High-sensitivity Multi-type Magnetic Guide Sensor
- Product catalog download
- 3D PDF Download
- MGM-8□501-MC Download the CAD data (DXF / Parasolid / STEP / IGES)
Application
- Automatic guided vehicles guidance
Features
- The exact position of the automatic guided vehicle to the guide tape is precisely output with increments of 10 mm with a 8-bit signal.
International Standards
- Our products do not have overseas safety regulations such as CE mark, UL standard, EN standard etc.
- Products is compliant to the RoHS directive.
* Please consult about "change of specification" and "request of specification" of the product.
Rating / Performance
Rating / Performance
| Model | MGM- 8N501-MC | MGM- 8N5011-MC | MGM- 8S501-MC | MGM- 8S5011-MC |
|---|---|---|---|---|
| Detection Surface | Front side detection | |||
| Detection Sensitivity | 500 μT ± 100 μT (With a magnet tape of 30×30×t1.5mm) | |||
| Power Supply Voltage | 10 V DC or more to less than 36 V DC, Ripple 5% or less | |||
| Current Consumption | 80 mA DC or less (At 12 V DC), 40 mA DC or less (At 24 V DC) | |||
| Output | NPN transistor open collector 30 V DC, 50 mA DC or less | |||
| Output Residual Voltage | 0.5 V DC or less (Load current 50 mA DC) | |||
| Operation Status | Normally open (Output ON with magnetic field) |
Normally closed (Output OFF with magnetic field) |
Normally open (Output ON with magnetic field) |
Normally closed (Output OFF with magnetic field) |
|
Number of Detection
Points / Pitch
|
8 point / 10 mm | |||
| Response time | 300 μs or less | |||
| Hysteresis | 30 μT or less (With a magnet tape of 30×30×t1.5mm) | |||
| Typical detection distances |
47 mm (*With MG50-1 series) | |||
| Operating set distance | 5 to 33 mm (*With MG50-1 series) | |||
| Detection polarity | N-pole | S-pole | ||
| Temperature Range | -10 to 60 °C (-20 to 65 °C storage temperature range)(Without dew condensation or icing) | |||
| Humidity Range | 95 % RH or less ( 95%RH or less storage humidity range)(Without dew condensation) | |||
|
Dielectric Strength
|
500 V AC for 1 minute (Between the live part and case) | |||
| Insulation resistance | 100 MΩ or more at 500 V DC megger (Between the live part and case) | |||
| Vibration resistance | 10 to 55 Hz, 1.5mm double amplitude in X, Y, and Z directions for 2 hours each (at power off) | |||
| Shock resistance | 500 m/s² (Approx. 50 G) in X, Y, and Z directions 3 times each (at power off) | |||
| Protection | IP67 (except for the connector part) | |||
| Case material | Case: ABS resin, aluminum plate t1.5 (Anodized aluminum, black) | |||
| Connector | Plug : HIF3BD-10PD-2.54R-MC (10-pin) (From Hirose Electric) | |||
| Cable | Flat cable of 50 mm in length | |||
Outline Dimensions / Output Circuit
Outline Dimensions
Output Circuit
Precautions During Use
- See General Precautions During Use for automatic guided vehicles magnetic sensors for other precautions.
*After you have put an item in your shopping cart, choose either [Quote] or [Order].
*For customized products or specifications, contact us using "Inquiry."
*Choose the currency from JPY, USD, or EUR.
| Model Name | Output configuration | Detection polarity | Standard Price | Inventory Type | Select |
|---|---|---|---|---|---|
| MGM-8N501-MC | Normally open | N pole |
256 USD
237 EUR
|
STD | |
| MGM-8S501-MC | Normally open | S pole |
256 USD
237 EUR
|
BTO | |
| MGM-8N5011-MC | Normally closed | N pole |
256 USD
237 EUR
|
BTO | |
| MGM-8S5011-MC | Normally closed | S pole |
256 USD
237 EUR
|
BTO |
STD Shipping is available immediately (on the day of order)
WIP Shipping is available within 1 to 3 weeks
BTO Shipping is available within 10 to 18 weeks
NOTE: The above information shows the typical delivery time. For actual delivery time, please confirm us as it depends on our business days and/or product quantities.
In the case of the quote request and order, please be sure to check the Terms and Conditions.
If you have made the procedure of quote request and order, it assumes that agree to the Terms and Conditions.
