Model GPD-M16D Two-phase Gear Sensor
- Product catalog download
- 3D PDF Download
- GPD-M16D Download the CAD data (DXF / Parasolid / STEP / IGES)
Application
- Detection of magnetic metal gear
- Detection of magnetic metal rack
Features
- Excellent temperature characteristics.
-
Two-phase digital output type.
- Determining the direction of rotation is available due to two-phase output.
International Standards
- Our products do not have overseas safety regulations such as CE mark, UL standard, EN standard etc.
- Products is compliant to the RoHS directive.
* Please consult about "change of specification" and "request of specification" of the product.
Rating/Performance / Sensor position / Output waveform
Rating / Performance
| Model | GPD-M16D | ||
|---|---|---|---|
|
Detection Target
|
Gear or rack of the module 0.8 or more (Face width of 10 mm or more, magnetic metal (e.g. S45C)) | ||
| Power Supply Voltage | 12 V to 24 V DC (Operating voltage range : 10 V to 30 V DC) | ||
| Current Consumption | 25 mA DC or less (12 V DC, at 25ºC) | ||
| Output | Nch MOSFET Open drain 30 V DC, 100 mA DC or less | ||
| Output Residual Voltage | 1 V DC or less (Load current 100 mA DC) | ||
| Operation Status |
Changes from Output 1 ON → Output 2 ON → Output 1 OFF → Output 2 OFF → Output 1 ON
(When the gear rotates clockwise from the direction in which LED is seen)
Output 1 OFF, Output 2 OFF (When there is no gear)
|
||
| Operation Indicator |
Red LED (Turns ON when Output 1 is ON)
Yellow green LED (Turns ON when Output 2 is ON)
|
||
| Detection Distance |
0.1 to 0.7 mm (At module 0.8)
0.1 to 1.0 mm (At module 1.0)
0.1 to 1.5 mm (At module 1.5)
0.1 to 1.7 mm (At module 2.0)
|
||
| Response frequency | 0 to 15 kHz (At 25ºC) | ||
|
Temperature Range
|
-20 to 70 °C (-20 to 70 °C storage temperature range)(Without dew condensation or icing) | ||
|
Humidity Range
|
35 to 95 % RH (35 to 95 % RH storage humidity range)(Without dew condensation) | ||
| Dielectric Strength | 500 V AC for 1 minute (Between the live part and case) | ||
| Insulation Resistance | 50 MΩ or more at 500 V DC megger (Between the live part and case) | ||
| Vibration Resistance | 10 to 55 Hz, 1.5mm double amplitude in X, Y, and Z directions for 2 hours each (at power off) | ||
| Shock Resistance | 1000 m/s² (Approx. 100 G) in X, Y, and Z directions 3 times each (at power off) | ||
| Protection | IP67 | ||
| Case Material | Case : Brass (Nickel-plated) , Cover : ABS | ||
| Cable | ø4, 4-core round cord of 0.3 mm² and 1 m in length (Oil and heat resistant vinyl) | ||
| Weight | Approx. 76g (Including accessories (Nuts and tooth washers)) |
*For a detailed specification of the other, please refer to specifications.
Sensor position / Output waveform
Outline Dimensions / Output Circuit
Outline Dimensions
Output Circuit
Precautions During Use
Precautions During Use
- The detection surface section incorporates a magnet. When positioning the sensor close to a magnetic object, be sure not to apply shock to the sensor due to collision caused by the magnetic force.
- Do not bring the sensor close to magnetically recorded media (such as magnetic tapes or floppy disks), or it may corrupt the data held on them.
- Do not allow the product to be in close proximity to a person equipped with an electronic medical device. It may cause the device to malfunction.
- Mount the sensor so that the mark groove at the detection surface is vertical to the gear rotation direction or the rack motion direction.
- When mounting the sensor, if the material of the mounting part is made of magnetic metal, the detection sensitivity may significantly change. Before using the sensor, assure a sufficient distance between the sensor and the magnetic metal mounting part, and confirm the detection characteristics.
- For other precautions, refer to “General Precautions” for gear sensors. For other detailed specifications, refer to the specification sheet of the corresponding model.
*After you have put an item in your shopping cart, choose either [Quote] or [Order].
*For customized products or specifications, contact us using "Inquiry."
*Choose the currency from JPY, USD, or EUR.
| Model Name | Power Voltage | Standard Price | Inventory Type | Select |
|---|---|---|---|---|
| GPD-M16D | 12 V to 24 V DC |
240 USD
222 EUR
|
STD |
STD Shipping is available immediately (on the day of order)
WIP Shipping is available within 1 to 3 weeks
BTO Shipping is available within 10 to 18 weeks
NOTE: The above information shows the typical delivery time. For actual delivery time, please confirm us as it depends on our business days and/or product quantities.
In the case of the quote request and order, please be sure to check the Terms and Conditions.
If you have made the procedure of quote request and order, it assumes that agree to the Terms and Conditions.
