Model GEC-1 Security Compact Shock Sensor(Low Current Consumption Type)
- Product catalog download
- 3D PDF Download
- GEC-1_EN Download the CAD data (DXF / Parasolid / STEP / IGES)
Application
- IoT
- Impact monitoring of cargo and baggage
- Impact monitoring of road equipment and materials
- Shock monitoring of machines
- Shock switches
- Security monitoring of buildings and equipment
Features
- Current consumption is only 13 μA, so battery-powered long-term use is practical.
- Detects shocks due to impacts/collisions. Avoids possible malfunctions caused by machine-generated high-frequency oscillations by lowering the sensitivity to high frequency waves.
- Low susceptibility to digital circuit power line noise.
- Can also detect momentary impacts. Even in that case, it outputs a pulse of 200 ms.
International Standards
- Our products do not have overseas safety regulations such as CE mark, UL standard, EN standard etc.
- Products is compliant to the RoHS directive.
* Please consult about "change of specification" and "request of specification" of the product.
Rating/Performance/Frequency Characteristics
Rating / Performance
| Model | GEC-* | GEC-*1 | |
|---|---|---|---|
| Power Supply Voltage | 2.7 V to 6.0 V DC | ||
| Current Consumption | 13 μA DC typ. | ||
| Output | N-ch MOSFET Open drain | ||
| 30 V DC, 50 mA DC or less (Output is available 600 ms from power ON) | |||
| Output Residual Voltage | 1 V DC or less (Load current 50 mA DC) | ||
| Operation Status | Normally open (Output ON when shock is detected) |
Normally closed (Output OFF when shock is detected) |
|
|
Output Hold Time
|
Momentary Shock Input | 200 ms ± 30 % ON | 200 ms ± 30 % ON |
| At Continuous Shock Input |
Continuous ON | Continuous OFF | |
| Detection Frequency | 10 Hz to 1 kHz | ||
| Response Time | 4 μs or less | ||
| Circuit Protection | Back-flow protection diode and output surge absorption diode | ||
| Temperature Range | -10 to 60 °C (-15 to 65 °C strage temperature range) (Without dew condensation or icing) |
||
| Humidity Range | 85 % RH or less (85 % RH or less strage humidity range) (Without dew condensation) |
||
| Dielectric Strength | 500 V AC for 1 min (Between live parts and the mounting part) | ||
| Insulation Resistance | 20 MΩ or more at 500 V DC megger (Between live parts and the mounting part) | ||
| Vibration Resistance | 10 to 55 Hz, 1.5mm double amplitude in X, Y, and Z directions for 2 hours each (at power off) | ||
| Shock Resistance | 1000 m/s² (Approx. 100 G) in X, Y, and Z direction 3 times each (at power off) | ||
| Protection | IP50 | ||
| Case Material | ABS resin with glass | ||
| Connector | Connector : SM03B-GHS(3-pin)(from J.S.T. Mfg. Co., Ltd.) [Connections]Housing : GHR-03V-S, Contact : SSHL-002T-P0.2 (from J.S.T. Mfg. Co., Ltd.) |
||
| Weight | Approx. 4 g | ||
| Options (Sold Separately) |
Connector harness: CNH-GHR03S28-300 | ||
Detection Sensitivity
| Model | GEC-1 | GEC-1H | GEC-2 | GEC-3 | GEC-5 | GEC-7 | GEC-10 | GEC-15 | GEC-20 | |
|---|---|---|---|---|---|---|---|---|---|---|
| GEC-11 | GEC-1H1 | GEC-21 | GEC-31 | GEC-51 | GEC-71 | GEC-101 | GEC-151 | GEC-201 | ||
|
Detection-
Sensitivity
|
30 Hz | 1 G ± 25 ％ |
1.5 G ± 20 ％ |
2 G ± 20 ％ |
3 G ± 20 ％ |
5 G ± 20 ％ |
7 G ± 20 ％ |
10 G ± 20 ％ |
15 G ± 20 ％ |
20 G ± 20 ％ |
| 100 Hz Reference |
2.3G ± 30 ％ |
3.0 G ± 25 ％ |
4.7 G ± 25 ％ |
6.9 G ± 25 ％ |
11.7 G ± 25 ％ |
16.2 G ± 25 ％ |
21.4 G ± 25 ％ (90Hz) |
23.0 G ± 25 ％ (60Hz) |
27.1 G ± 25 ％ (50Hz) |
|
*Other detection sensitivities and output holding times than stated above are also available. Contact us.
Reference Frequency Characteristics (Typical Example)
Outline Dimensions/Connector Harness/Output Circuit
Outline Dimensions
Connector Harness(Sold Separately)
Output Circuit
Precautions During Use
- The case fastening should be at a torque of 0.32 N·m or less.
- Avoid subjecting the sensor wire harness to mechanical stress while connecting to the connector or allowing vibration to transferred from impact, otherwise disconnection or malfunction may result. Support the harness lead-out so that it is not subjected to excessive stress or vibration.
- Thermal shock applied to the sensor during an abrupt temperature change can change the detection sensitivity. Ensure proper handling of the sensor.
- It takes approximately 600 ms (at maximum) from Power ON until the output turns OFF (for the normally open type) or until the output turns ON (for the normally closed type).
- Noise above 100 dB may affect sensitivity. Check before using the sensor.
- Sources of strong electromagnetic noise can affect detection sensitivity. Check before using the sensor.
- For other precautions, refer to “General Precautions” for shock sensors.
* For other detailed specifications, refer to the specification sheet of the corresponding model.
*After you have put an item in your shopping cart, choose either [Quote] or [Order].
*For customized products or specifications, contact us using "Inquiry."
*Choose the currency from JPY, USD, or EUR.
| Model Name | Output configuration | Detection sensitivity | Standard Price | Inventory Type | Select |
|---|---|---|---|---|---|
| GEC-1 | Normally open | 1 G |
22 USD
20 EUR
|
STD | |
| GEC-1H | Normally open | 1.5 G |
22 USD
20 EUR
|
BTO | |
| GEC-2 | Normally open | 2 G |
22 USD
20 EUR
|
STD | |
| GEC-3 | Normally open | 3 G |
22 USD
20 EUR
|
STD | |
| GEC-5 | Normally open | 5 G |
22 USD
20 EUR
|
BTO | |
| GEC-7 | Normally open | 7 G |
22 USD
20 EUR
|
BTO | |
| GEC-10 | Normally open | 10 G |
22 USD
20 EUR
|
BTO | |
| GEC-15 | Normally open | 15 G |
22 USD
20 EUR
|
BTO | |
| GEC-20 | Normally open | 20 G |
22 USD
20 EUR
|
BTO | |
| GEC-11 | Normally closed | 1 G |
22 USD
20 EUR
|
BTO | |
| GEC-1H1 | Normally closed | 1.5 G |
22 USD
20 EUR
|
BTO | |
| GEC-21 | Normally closed | 2 G |
22 USD
20 EUR
|
BTO | |
| GEC-31 | Normally closed | 3 G |
22 USD
20 EUR
|
BTO | |
| GEC-51 | Normally closed | 5 G |
22 USD
20 EUR
|
BTO | |
| GEC-71 | Normally closed | 7 G |
22 USD
20 EUR
|
BTO | |
| GEC-101 | Normally closed | 10 G |
22 USD
20 EUR
|
BTO | |
| GEC-151 | Normally closed | 15 G |
22 USD
20 EUR
|
BTO | |
| GEC-201 | Normally closed | 20 G |
22 USD
20 EUR
|
BTO |
STD Shipping is available immediately (on the day of order)
WIP Shipping is available within 1 to 3 weeks
BTO Shipping is available within 10 to 18 weeks
NOTE: The above information shows the typical delivery time. For actual delivery time, please confirm us as it depends on our business days and/or product quantities.
In the case of the quote request and order, please be sure to check the Terms and Conditions.
If you have made the procedure of quote request and order, it assumes that agree to the Terms and Conditions.
