How It Works Shipping Fee Terms of Use

Model MDS-F2R53 / MDS-F2R54 Small Inductive Sensor

Application

  • Positioning of the processing machines
  • Position detection of the the metal pallets and moving table
  • Metal detection in a narrow space

Features

  • Pch MOS FET open-drain output type small inductive sensor with a detection surface of 8 mm and a detection distance of 2.5 mm..
  • Simple mounting with a single M3 screw or the mounting bracket that saves space (Sold separately).
  • Safely available even in the place where water may splash thanks to its molded type.

International Standards

  • Our products do not have overseas safety regulations such as CE mark, UL standard, EN standard etc.
  • Products is compliant to the RoHS directive.

* Please consult about "change of specification" and "request of specification" of the product.

Rating/Performance/Characteristics Graph

Rating / Performance

Model MDS-F2R53 MDS-F2R54
Detection Surface Front side detection
Detection Distance 2.5 mm  ± 20%
Hysteresis 20 % or less of the detection distance
Set Distance 0 to 1.8 mm
Standard Detection
Target
Iron sheet of 15 × 15 mm and 1 mm in thickness
Power Supply Voltage 12 V to 24 V DC (Operating voltage range : 10 V to 30 V DC)
Current Consumption 10 mA DC or less (At 12V DC and 24V DC)
Output Pch MOSFET Open drain 30 V DC 100 mA DC or less
Output Residual Voltage 1 V DC or less (When load current is 100 mA DC and a 1-meter cord)
Operation Status Normally open
(ON output when detecting)
Normally closed
(OFF output when detecting)
Operation Indicator Red LED (Lit when the output is ON)
Response Frequency 1 kHz or more
Temperature Range -25 to 70 °C (-25 to 70 °C storage temperature range)(Without dew condensation or icing)
Humidity Range 35 to 95 % RH (35 to 95 % RH storage humidity range)(Without dew condensation)
Dielectric Strength 1000 V AC for 1 minute (Between the live part and case)
Insulation Resistance 50 MΩ or more at 500 V DC megger (Between the live part and case)
Vibration Resistance 10 to 55 Hz, 1.5 mm double amplitude in X, Y and Z directions for 2 hours each (at power off)
Shock Resistance 1000 m/s² (Approx. 100 G) in X, Y and Z directions 10 times each (at power off)
Protection IP67
Case Material Polyarylate
Cable ø3, 3-core round cord of 0.15 mm² and insulation 0.8 mm and 1 m in length (Oil and heat resistant vinyl)
Weight Approx. 15 g
Options
(Sold Separately)
Mounting bracket : PMS-F2R5S

*For a detailed specification of the other, please refer to specifications.

Characteristics Graph (Typical Example)

ST-MDS-F2R53_EN_19.jpg

 

Outline Dimensions/Mounting Bracket/Output Circuit

Outline Dimensions

MDS-F2R53.jpg

Mounting Bracket (Sold Separately)

PMS-F2R5S.jpg

Output Circuit

ST-MDS-F2R53_MDS-F2R54_EN-2_10.jpg

Precautions During Use

Influence of Surrounding Metal

If there are metals present near the inductive sensor, keep them away from and beneath the plane of the sensor detection surface at a minimum of the values specified in the figure below.

MDS-F2R53_01.jpg

Mutual Interference

If you use a number of the same product, separate them at least by the distances shown in the figure below to prevent reciprocal interference.(The different frequency model type has “B” at the end of its model designation.)

MDS-F2R5_EN.jpg

Mounting

Use "flat washers and M3 screws" or "M3 truss screws" to fix the sensor.
Control the tightening torque to 0.5 N·m or less.

Other

See inductive sensor general Precautions During Use for other precautions.

*After you have put an item in your shopping cart, choose either [Quote] or [Order].
*For customized products or specifications, contact us using "Inquiry."
*Choose the currency from JPY, USD, or EUR.

Model Name Output configuration Frequency Standard Price Inventory Type Select
MDS-F2R53 Normally open Normal type
14 USD
13 EUR
STD
MDS-F2R53B Normally open Different frequency type
14 USD
13 EUR
BTO
MDS-F2R54 Normally closed Normal type
14 USD
13 EUR
STD
MDS-F2R54B Normally closed Different frequency type
14 USD
13 EUR
BTO

STD Shipping is available immediately (on the day of order)

WIP Shipping is available within 1 to 3 weeks

BTO Shipping is available within 10 to 18 weeks

NOTE: The above information shows the typical delivery time. For actual delivery time, please confirm us as it depends on our business days and/or product quantities.

In the case of the quote request and order, please be sure to check the Terms and Conditions.
If you have made the procedure of quote request and order, it assumes that agree to the Terms and Conditions.

Quantity:
pieces
  • 1 USD
    1 EUR

To confirm the Request a quote / Order Cart

Part number index

Product Comparison Table

confirmation of the estimate request content

Proximity sensor

Go to page top