• センサ、タッチセンサの日本語ページ
  • sensor,touch sensor English site
How It Works Shipping Fee Terms of Use

Model MGD-L24F Electromagnetic Sensor NEW 

Application

  • Positioning of the machine or the like using a magnet
  • There is little space, the magnetic detection of a narrow place
  • Position detection of metal pallets or moving tables using magnets

Features

  • Simple installation with a single M2 screw.
  • Small flat electromagnetic sensor that can be installed easily in small places.
  • Can be used in a wide range of power supply voltage from 5 V DC to 24 V DC.

International Standards

  • Our products do not have overseas safety regulations such as CE mark, UL standard, EN standard etc.
  • Products is compliant to the RoHS directive.

* Please consult about "change of specification" and "request of specification" of the product.

Rating/Performance

Rating / Performance

Model MGD-L24FD MGD-L24FD1
Detection Surface Front side detection
Detection Polarity N-pole and S-pole (Both poles)
Detection Sensitivity Detection : 2.4mT (24 G) or more (At the standard point) *Maximum applied magnetic field : 150 mT
Reset : 0.4 mT (0.4 G) or less (At the standard point)
Power Voltage 5 V to 24 V DC (Operating voltage range : 4.75 V to 30 V DC)
Power Consumption 5 mA DC or less
Output N-channel MOSFET Open drain 30 V DC, 50 mA DC or less
Output Residual Voltage 1 V DC or less (Load current 50 mA DC)
Operation Status Normally open
(Output ON with magnetic field)
Normally closed
(Output OFF with magnetic field)
Status Indication Red LED : ON at output ON
Response Frequency 1 kHz or more
Temperature Range -10 to 60 °C (-20 to 70 °C during storage)
(Without dew condensation or freezing)
Humidity Range 35 to 85 % RH (35 to 85 % RH or less during storage)(Without dew condensation)
Breakdown Voltage 500 V AC, 50/60 Hz for 1 min (Between live parts and the case)
Insulation Resistance 50 MΩ or more, at 500 V DC megger(Between live parts and the case)
Vibration Resistance Durability : 10 to 55 Hz, Double amplitude: 1.5 mm in X-, Y-, and Z-direction, each 2 hours (Device not powered)
Shock Resistance Durability : 500 m/s² (Approx. 50 G) in X-, Y-, and Z-direction, each 3 times (Device not powered)
Protection Rating IP50
Case Material Polyarylate resin
Connector Connector : S3B-ZR-SM4A-TF (3-pin)(from J.S.T. Mfg. Co., Ltd.)
[Connections]Housing : ZHR-3, Contact : SZH-002T-P0.5
(from J.S.T. Mfg. Co., Ltd.)
Weight Approx. 2 g
Options
(Sold Separately)
Connector harness : SZH-3-300

*For a detailed specification of the other, please refer to specifications.

Reference Detection Distances

ST-MGD-L24F_EN-2_11.png

External Dimensions Diagram/Connector Harness/Output Circuit 

External Dimensions Diagram

ST-MGD-L24F_EN-2_03.png

Connector Harness (Sold Separately)

SZH-3-300外形寸法図.gif

Output Circuit

ST-MGD-L24F_EN-2_07.png

Precautions During Use

  1. Do not apply the maximum allowed magnetic field of 150 mT or more to the sensor reference point.
  2. If the object on which the electromagnetic sensor is installed is made of magnetic metal, the detection sensitivity may greatly vary.
    Ensure sufficient distance with magnetic metal and always verify the detection characteristics before using the sensor.
  3. If there is magnetic metal with residual magnetism in the surroundings of the electromagnetic sensor installation location,the detection characteristics may greatly vary. Verify the detection characteristics before using the sensor.
  4. See Electromagnetic sensor general usage precautions for other precautions.

 

Quote / Order

Quote / Order

Please contact our sales.

Part number index

Product Comparison Table

confirmation of the estimate request content

Electromagnetic sensor

Go to page top