Model MGP-C*501* High-sensitivity Electromagnetic Sensor
- Product catalog download
- 3D PDF Download
- MGP-C□501□_EN Download the CAD data (DXF / Parasolid / STEP / IGES)
Application
- Magnet detection
- Automatic guided vehicles guidance
Features
- A DC 3-wire type is also available.
- N pole detection models and S pole detection models are available. Select the model depending on your usage.
- Operation can be easily checked with the operation display light.
International Standards
- Our products do not have overseas safety regulations such as CE mark, UL standard, EN standard etc.
- Products is compliant to the RoHS directive.
* Please consult about "change of specification" and "request of specification" of the product.
Rating/Performance
Rating / Performance
| Model | MGP-CN5013 | MGP-CN5014 | MGP-CS5013 | MGP-CS5014 |
|---|---|---|---|---|
| Detection Surface | Front side detection | |||
| Detection Sensitivity | 500 μT ± 100 μT | |||
| Power Supply Voltage | 12 V to 24 V DC (Operating voltage range : 10 V to 30 V DC) | |||
| Power Consumption | 20 mA DC or less | |||
| Output | P-channel MOSFET Open drain 30 V DC 50 mA DC or less | |||
| Output Residual Voltage | 1 V DC or less (Load current 50 mA DC) | |||
| Operation Configuration | Normally open (On output with magnetic field) |
Normally closed (Off output with magnetic field) |
Normally open (On output with magnetic field) |
Normally closed (Off output with magnetic field) |
| Operation Display | Red LED (Lit when On output) | |||
| Response Time | 300 μs or less | |||
| Hysteresis | 30 μT or less (With a rubber plate magnet of 30 × 30 × t1.5 mm) | |||
| Detection Polarity | N pole | S pole | ||
| Reference Detection Distances | 53 mm (*The MG50-1 series) | |||
| Operating Set Distance | 5 to 37 mm (*The MG50-1 series) | |||
| Operating Temperature Range | -10 to 60 °C (-20 to 65 °C during storage) (Without dew condensation or freezing) |
|||
| Operating Humidity Range |
90% RH or less (90% RH or less during storage)(Without dew condensation) | |||
| Withstand Voltage | 1 min at 500 V AC 50/60 Hz (Between the live part and case) | |||
| Insulation Resistance | 100 MΩ or more measured with an ohmmeter at 500 V DC (Between the live part and case) |
|||
| Vibration Resistance | Durability : 2 hours in each X, Y, Z direction at 10 to 55 Hz and with peak-to-peak amplitude of 1.5 mm (At power off) | |||
| Shock Resistance | Durability : 3 times at 500 m/s² (approx. 50 G) in each X, Y, Z direction (At power off) |
|||
| Protection Rating | IP65 | |||
| Case Material | ABS (Nut ABS/PC alloy resin) | |||
| Cable | ø4, 3-core round cord of 0.2 mm² and 1 m in length (Oil and heat resistant) | |||
| Weight | Approx. 30 g | |||
*For a detailed specification of the other, please refer to specifications.
External Dimensions Diagram/Output Circuit
External Dimensions Diagram
Output Circuit
Usage Precautions
-
If there are magnetic objects on or around the installation location of the electromagnetic sensor, keep a distance between the sensor and these objects greater than the distance between the sensor and the magnet tape.
Check also carefully the detection characteristics before using the sensor. -
If there is magnetic metal with residual magnetism in the surroundings of the electromagnetic sensor installation location,the detection characteristics may greatly vary. Verify the detection characteristics before using the sensor.
- Tighten the sensor using the nuts supplied with a torque of 0.5 Nm.
- See Electromagnetic sensor general usage precautions for other precautions.
Precautions with Detection Area Diagram and Reverse Polarity Flux
Precautions with Detection Area Diagram and Reverse Polarity Flux (Typical Example)
Quote / Order
Quote / Order
Please contact our sales.
*After you have put an item in your shopping cart, choose either [Quote] or [Order].
*For customized products or specifications, contact us using "Inquiry."
*Choose the currency from JPY, USD, or EUR.
| Model Name | Output configuration | Detection polarity | Standard Price | Inventory Type | Select |
|---|---|---|---|---|---|
| MGP-CN5013 | Normally open | N pole |
38 USD
35 EUR
|
WIP | |
| MGP-CS5013 | Normally open | S pole |
38 USD
35 EUR
|
STD | |
| MGP-CN5014 | Normally closed | N pole |
38 USD
35 EUR
|
STD | |
| MGP-CS5014 | Normally closed | S pole |
38 USD
35 EUR
|
STD |
STD Shipping is available immediately (on the day of order)
WIP Shipping is available within 1 to 3 weeks
BTO Shipping is available within 10 to 18 weeks
NOTE: The above information shows the typical delivery time. For actual delivery time, please confirm us as it depends on our business days and/or product quantities.
In the case of the quote request and order, please be sure to check the Terms and Conditions.
If you have made the procedure of quote request and order, it assumes that agree to the Terms and Conditions.
