• センサ、タッチセンサの日本語ページ
  • sensor,touch sensor English site
How It Works Shipping Fee Terms of Use

Model SVD Oscillation Shock Sensor (PATENTED) NEW 

Application

  • Monitoring of illegal operation in the game machine
  • Opening and closing of the door monitoring
  • Security of mechanical instruments
  • Monitoring of vehicle movement and collision

Features

  • It is a sensor that integrates a shaking sensor that detects shaking and an impact sensor that detects impacts such as bumping and hitting.
  • Detects vibrations on a game machine cause by inappropriate actions.
  • Detects shaking and collisions when moving due to vehicle theft.
  • It reduces malfunctions due to *high-frequency vibration.
    *High-frequency vibration: Vibration caused by the movement of a pachinko ball or vibration of a motor.
  • Can detect instant oscillations and impacts and output them for more than 200 ms using a multivibrator circuit.

International Standards

  • Our products do not have overseas safety regulations such as CE mark, UL standard, EN standard etc.
  • Products is compliant to the RoHS directive.

* Please consult about "change of specification" and "request of specification" of the product.

Rating and performance / Characteristics graph

Rating and performance

Model name SVD-P** SVD-P**1
Power Voltage 12 V DC ±10 %
Power consumption 20 mA DC or less
Output NPN transistor open collector
Output Capacity 30 V DC, 50 mA DC or less
Output Residual Voltage 1 V DC or less (Load current 50 mA DC)
Operation Status Normally open
(Output ON when shock is detected)
Normally Closed
(Output OFF when shock is detected)
Output Time Single impact is input: 200 ms or more On
Continuous impact is input: continuous On
Single impact is input: 200 ms or more OFF
Continuous impact is input: continuous OFF
Detection Frequency 10 Hz to 1 kHz
Response Time 3 ms or less
Temperature Range
range
-10 to 60 °C (-15 to 65 °C during storage)
(Without dew condensation or freezing)
Humidity Range
range
85 % RH or less (85 % RH or less during storage)
(Without dew condensation or freezing)
Breakdown Voltage 500 V AC, 50/60 Hz for 1 min (Between live parts and the case)
Insulation Resistance 20 MΩ or more, at 500 V DC megger (Between live parts and the case)
Vibration Resistance Durability : 10 to 55 Hz, Double amplitude: 1.5 mm in X-, Y-, and Z-direction, each 2 hours (Device not powered)
Shock Resistance Durability : 500 m/s² (Approx. 50 G) in X-, Y-, and Z-direction, each 3 times (Device not powered)
Ingress Protection IP50
Case Material ABS reinforced with glass-fiber
Connector Connector : S3B-ZR-SM2-TF (3-pin) (from J.S.T. Mfg. Co., Ltd.)
[Connections]Housing: ZHR-3, Contact: SZH-002T-P0.5
(from J.S.T. Mfg. Co., Ltd.)
Weight Approx. 7 g
Options
(sold separately)
Connector harness : SZH-3-300

Detection Sensitivity

Model Normally Open SVD-P32 SVD-P33 SVD-P52 SVD-P53
Normally Closed SVD-P321 SVD-P331 SVD-P521 SVD-P531
Detection Sensitivity 10Hz(Vibration) 0.3G ± 20% 0.3G ± 20% 0.5G ± 20% 0.5G ± 20%
30Hz(Shock) 2G ± 20% 3G ± 20% 2G ± 20% 3G ± 20%

Reference Frequency Characteristics (Typical Example)

06.jpg

Timing Chart (Single Vibration Input)

05.jpg

Dimensions / Output circuit

Dimensions

04.jpg

Connector Harness (Sold Separately)

SZH-3-300-EN.gif

Output Circuit

kairo_en.jpg

Usage precautions

  1. Tighten the case with a torque of 0.5 N·m or less.
  2. The maximum output standby time of the product is 2.4 seconds after the power is turned on.
  3. If the sensor is subject to thermal shocks, its detection sensitivity will differ for the duration of the sudden temperature change.
    Check the environment before using the sensor.
  4. Avoid subjecting the sensor wire harness to mechanical stress while connecting to the connector or allowing vibration to transferred from impact, otherwise disconnection or malfunction may result.
  5. Support the harness lead-out so that it is not subjected to excessive stress or vibration.
  6. See Impact sensors general usage precautions for other precautions.

 

*After you have put an item in your shopping cart, choose either [Quote] or [Order].
*For customized products or specifications, contact us using "Inquiry."
*Choose the currency from JPY, USD, or EUR.

Model Name Output configuration Detection sensitivity Standard Price Inventory Type Select
SVD-P32 Normally open 0.3G(10Hz)/2G(30Hz)
2,220 JPY
21 USD
18 EUR
BTO
SVD-P33 Normally open 0.3G(10Hz)/3G(30Hz)
2,220 JPY
21 USD
18 EUR
BTO
SVD-P52 Normally open 0.5G(10Hz)/2G(30Hz)
2,220 JPY
21 USD
18 EUR
BTO
SVD-P53 Normally open 0.5G(10Hz)/3G(30Hz)
2,220 JPY
21 USD
18 EUR
BTO
SVD-P321 Normally closed 0.3G(10Hz)/2G(30Hz)
2,220 JPY
21 USD
18 EUR
BTO
SVD-P331 Normally closed 0.3G(10Hz)/3G(30Hz)
2,220 JPY
21 USD
18 EUR
BTO
SVD-P521 Normally closed 0.5G(10Hz)/2G(30Hz)
2,220 JPY
21 USD
18 EUR
BTO
SVD-P531 Normally closed 0.5G(10Hz)/3G(30Hz)
2,220 JPY
21 USD
18 EUR
BTO

STD Shipping is available immediately (on the day of order)

WIP Shipping is available within 1 to 3 weeks

BTO Shipping is available within 4 to 10 weeks

NOTE: The above information shows the typical delivery time. For actual delivery time, please confirm us as it depends on our business days and/or product quantities.

In the case of the quote request and order, please be sure to check the Terms and Conditions.
If you have made the procedure of quote request and order, it assumes that agree to the Terms and Conditions.

Quantity:
pieces
  • 85 JPY
    1 USD
    1 EUR

To confirm the Request a quote / Order Cart

Go to page top