• センサ、タッチセンサの日本語ページ
  • sensor,touch sensor English site
How It Works Shipping Fee Terms of Use

Model MDE-C10 Proximity detection sensor for all metals NEW 

Application

  • It is possible to extend the detection distance even for non-magnetic metals such as aluminum and copper.
  • A detection distance of 8.5mm can be obtained with 1-yen coin (aluminum).
  • Any metal can be detected.
  • Maintenance is straightforward due to the connector type.

Features

  • Detection of brass, copper or aluminum coins such as those used in ATMs
  • Detection of vending machine coins and non-magnetic metal cans
  • Level detection of magnetic steel balls and non-magnetic metal balls
  • Detection of tokens

International Standards

  • Our products do not have overseas safety regulations such as CE mark, UL standard, EN standard etc.
  • Products is compliant to the RoHS directive.

* Please consult about "change of specification" and "request of specification" of the product.

Rating and performance

Rating and performance

Model name MDE-C10 MDE-C10
Detection Surface Upper side detection
Detection Distance 10 mm ±10 %
Hysteresis 15 % or less of the detection distance
Setting Distance 8.0 mm
Standard Detection
Object
Aluminum of 40 x 40 mm, plate thickness : 1 mm
Power Voltage 12 V to 24 V DC (Operating voltage range: 10.8 V to 26.4 V DC)
Power Consumption 15 mA DC or less
Output Nch MOS FET open drain 30 V DC, 100 mA DC or less
Output Residual Voltage 0.5 V DC or less (100 mA DC)
Operation Status Normally open
(On output with detection target)
Normally closed
(Off output with detection target)
Response Frequency 400 Hz or more
Temperature Range -10 to 60 ºC (-25 to 65 ºC at during storage)
(Without dew condensation or freezing)
Humidity Range 85 % RH or less (85% RH or less at during storage)
(Without dew condensation)
Circuit Protection With reverse polarity connection protection diode, With output surge absorption diode
Breakdown Voltage 1000 V AC, 50/60 Hz for 1 min (Between live parts and the case)
Insulation Resistance 50 MΩ or more, at 500 V DC megger (Between live parts and the case)
Vibration Resistance Durability: 10 to 55 Hz, Double amplitude: 1.5 mm in X-, Y-, and Z-direction, each 2 hours (Device not powered)
Shock Resistance Durability: 500 m/s² (Approx. 50 G) in X-, Y-, and Z-direction, each 3 times (Device not powered)
Ingress Protection IP50
Case Material PBT resin (Blue)
Connecter Connector : S3B-PH-SM4-TB (3-pin) (from J.S.T. Mfg. Co., Ltd.)
[Connections]Housing : PHP-3, Contact : SPH-002T-P0.5S
(from J.S.T. Mfg. Co., Ltd.)
Weight Approx. 15 g
Options (Sold Separately) Connector harness: CNH-PHR03S24-300

*For a detailed specification of the other, please refer to specifications.

Characteristics Graph

Graph of detection distance vs detection target size (Reference)

検出体の大きさによる検出距離の変化EN_MDE-C10.jpgIf the detection object is smaller than the standard detection object or if it is made of non-ferrous metal, the detection distance will decrease.
Carry out testing to confirm suitability.

Change in detection distance depending on the detection object material (Reference)

MDE-C10_EN2_07.jpg

The detection distance will change according to the detection object material; carry out testing to confirm suitability.

Coin Detection Distance

硬貨の検出距離EN_MDE-C10.jpg

Detection Sistance of The Pachinko-slot Token (ø25 x t=1.6)

パチスロ用メダルの検出距離EN_MDE-C10.jpg

Dimensions / Output circuit

Dimensions

MDE-C10_EN2_03.jpg

Connector Harness (sold separately)

CNH-PHR03S24-300_EN.gif

Output circuit

出力回路EN_MDE-C10.jpg

*Because there is no reverse connection protection diode built-in, pay careful attentionto the polarity of the power supply.

Usage precautions

Influence of surrounding metal

If there are metals present near the proximity sensor, keep them away from and beneath the plane of the sensor detection surface at a minimum of the values specified in the figure below.

 
MDE-C10_EN2_11.jpgUse the sensor carefully so as not to contact the front surface of the detection target.

Mutual interference

When two or more identical sensors are used, observe the minimum values shown in the figure below to prevent mutual interference.
(The different frequency model type has “B” at the end of its model designation.)

相互干渉EN_MDE-C10.jpg

Installation

The tightening torque for the case should be 0.5 Nm or less.

Other

See proximity sensor general usage precautions for other precautions.

 

*After you have put an item in your shopping cart, choose either [Quote] or [Order].
*For customized products or specifications, contact us using "Inquiry."
*Choose the currency from JPY, USD, or EUR.

Model Name Operation Configuration Frequency Standard Price Inventory Type Select
MDE-C10 Normally open Normal type
6,000 JPY
56 USD
49 EUR
BTO
MDE-C10B Normally open Different frequency type
6,000 JPY
56 USD
49 EUR
BTO
MDE-C101 Normally closed Normal type
6,000 JPY
56 USD
49 EUR
BTO
MDE-C101B Normally closed Different frequency type
6,000 JPY
56 USD
49 EUR
BTO

STD Shipping is available immediately (on the day of order)

WIP Shipping is available within 1 to 3 weeks

BTO Shipping is available within 4 to 10 weeks

NOTE: The above information shows the typical delivery time. For actual delivery time, please confirm us as it depends on our business days and/or product quantities.

In the case of the quote request and order, please be sure to check the Terms and Conditions.
If you have made the procedure of quote request and order, it assumes that agree to the Terms and Conditions.

Quantity:
pieces
  • 90 JPY
    1 USD
    1 EUR

To confirm the Request a quote / Order Cart

Part number index

Product Comparison Table

confirmation of the estimate request content

Proximity sensor

Go to page top