• センサ、タッチセンサの日本語ページ
  • sensor,touch sensor English site
How It Works Shipping Fee Terms of Use

Model MDE-Q5 Proximity detection sensor for all metals NEW 

Application

  • Installation is easy due to the square form factor. can be installed directly on metal surfaces.
  • Safely available even in the place where water may splash thanks to its molded type.
  • Small proximity sensor with a detection surface of 17 x 17 mm and a detection distance of 5 mm (front side detection type)

Features

  • Non-magnetic metals such as aluminum, copper, etc. can be detected at a long distance as well as magnetic metals such as iron.

International Standards

  • Our products do not have overseas safety regulations such as CE mark, UL standard, EN standard etc.
  • Products is compliant to the RoHS directive.

* Please consult about "change of specification" and "request of specification" of the product.

Rating and performance

Rating and performance

Model name MDE-Q5 MDE-Q51
Detection Surface Front side detection
Detection Distance 5 mm ±10 %
Hysteresis 15% or less of the detection distance
Setting Distance 0 to 4.0 mm
Standard Detection
Object
Aluminum of 17 x 17 mm, plate thickness : 1 mm
Power Voltage 12 V to 24 V DC (Operating voltage range: 10.8 V to 26.4 V DC)
Power Consumption 15 mA DC or less
Output Nch MOS FET open drain 30 V DC, 100 mA DC or less
Output Residual Voltage 0.5 V DC or less (Load current 100 mA DC and a 1-meter cord)
Operation Status Normally open
(On output with detection target)
Normally closed
(Off output with detection target)
Operation Indication Red LED (lit when On output)
Response Frequency 500 Hz or more
Temperature Range -10 to 60 °C (-10 to 60 °C during storage)
(Without dew condensation or freezing)
Humidity Range 35 to 95 % RH (35 to 95 % RH during storage)
(Without dew condensation)
Breakdown Voltage 1000 V AC, 50/60 Hz for 1 min (Between live parts and the case)
Insulation Resistance 50 MΩ or more, at 500 V DC megger (Between live parts and the case)
Vibration Resistance Durability: 10 to 55 Hz, Double amplitude: 1.5 mm in X-, Y-, and Z-direction, each 2 hours (Device not powered)
Shock Resistance Durability: 500 m/s² (Approx. 50 G) in X-, Y-, and Z-direction, each 3 times (Device not powered)
Ingress Protection IP67
Case Material ABS resin (Blue)
Cable ø4, 3-core round cord of 0.3 mm² and insulation 1.1 mm and 1 m in length
(Oil and heat resistant)
Weight Approx. 30 g

*For a detailed specification of the other, please refer to specifications.

Characteristics Graph

Characteristics Graph (Typical Example)

特性グラフEN_MDE-Q5.jpg

Graph of detection distance vs detection target size (Reference)

検出体大きさによる検出距離の変化EN_MDE-Q5.jpg

Change in detection distance depending on the detection object material (Reference)

検出体材質による検出距離の変化EN_MDE-Q5.jpg

Dimensions / Output circuit

Dimensions

外形寸法図EN_MDE-Q5.jpg

Output circuit

出力回路EN_MDE-Q5.jpg

*Because there is no reverse connection protection diode built-in, pay careful attentionto the polarity of the power supply.

 

Usage precautions

Influence of surrounding metal

If there are metal objects around the proximity sensor, leave at least the space indicated in the figure below between them and the sensor.

 
周囲金属の影響EN_MDE-Q5.jpg

Mutual interference

If you use two or more of the same product, separate them at least by the distances shown in the figure below to prevent reciprocal interference.
(Sensors with a different frequency are indicated with a B after the model name.)
 
相互干渉EN_MDE-Q5.jpg

Installation

Tighten the case with a torque of 0.59 N·cm (6 kgf·cm) or less.

Other

See proximity sensor general usage precautions for other precautions.

 

*After you have put an item in your shopping cart, choose either [Quote] or [Order].
*For customized products or specifications, contact us using "Inquiry."
*Choose the currency from JPY, USD, or EUR.

Model Name Operation Configuration Frequency Standard Price Inventory Type Select
MDE-Q5 Normally open Normal type
7,700 JPY
72 USD
64 EUR
BTO
MDE-Q5B Normally open Different frequency type
7,700 JPY
72 USD
64 EUR
BTO
MDE-Q51 Normally closed Normal type
7,700 JPY
72 USD
64 EUR
BTO
MDE-Q51B Normally closed Different frequency type
7,700 JPY
72 USD
64 EUR
BTO

STD Shipping is available immediately (on the day of order)

WIP Shipping is available within 1 to 3 weeks

BTO Shipping is available within 4 to 10 weeks

NOTE: The above information shows the typical delivery time. For actual delivery time, please confirm us as it depends on our business days and/or product quantities.

In the case of the quote request and order, please be sure to check the Terms and Conditions.
If you have made the procedure of quote request and order, it assumes that agree to the Terms and Conditions.

Part number index

Product Comparison Table

confirmation of the estimate request content

Proximity sensor

Go to page top