• センサ、タッチセンサの日本語ページ
  • sensor,touch sensor English site
How It Works Shipping Fee Terms of Use

Model GIW-*-5 Security Shock Sensor, Power Voltage 5 V DC [PATENTED] NEW 

Application

  • Excellent environmental protection. The sensor section is built to the IP67 standard and can be used in environments where dust or water is present. Waterproof connectors can also be used.
  • Single-axis impact sensor.
  • Vibration sensing frequency range from 10Hz to 1kHz.
  • Ideal for crime prevention, acceleration monitoring, such as caused by impact shock, breakage and object movement.
  • Sensitivity is reduced for high-frequency vibration generated from the machine, preventing false detection due to high-frequency vibration.
  • Even momentary impacts can be detected.

Features

  • Equipment impact monitoring
  • Security sensors (theft prevention, intrusion detection, etc.)
  • Shock detection switches

International Standards

  • Our products do not have overseas safety regulations such as CE mark, UL standard, EN standard etc.
  • Products is compliant to the RoHS directive.

* Please consult about "change of specification" and "request of specification" of the product.

Rating/Performance/Frequency Characteristics

Rating/Performance

Model GIW-*-5 GIW-*1-5
Power Voltage 5 V DC ± 5 %
Power Consumption 5 mA DC or less
Output N-channel MOSFET Open drain
30 V DC, 100 mA DC or less, (Output is available 800 ms from power ON)
Output-Residual Voltage 1 V DC or less (Load current 100 mA DC)
Operation Status Normally open
(Output ON when shock is detected)
Normally closed
(Output OFF when shock is detected)
Output Hold Time
Omentary Shock Input ON for at least 80 ms
(When input time is 3 ms or more)
ON for 80 ms or less
(When input time is less than 3 ms)
OFF for at least 80 ms
(When input time is 3 ms or more)
OFF for 80 ms or less
(When input time is less than 3 ms)
At Continuous
Shock Input
Continuous ON Continuous OFF
Detection Frequency 10 Hz to 1 kHz
Response Time 4 ms or less
Circuit Protection Output surge absorption diode
Temperature Range -10 ºC to 60 ºC (At storage: -15 ºC to 65 ºC)
(Without dew condensation or freezing)
Humidity Range 95% RH or less (At storage: 95 % RH or less)
(Without dew condensation)
Breakdown Voltage 500 V AC, 50/60 Hz for 1 min (Between live parts and mountings)
Insulation Resistance 20 MΩ or more, At 500 V DC megger (and mountings) Between live parts
Vibration Resistance Durability: 10 to 55 Hz, Double amplitude: 1.5 mm in X-, Y-, and Z-direction, each 2 hours (Device not powered)
Shock Resistance Durability: 500 m/s² (Approx. 50 G) in X-, Y-, and Z-direction, each 3 times (Device not powered)
Ingress Protection IP67
Case Material ABS reinforced with glass-fiber
Cable  ø4, 3-core round cord of 0.3 mm² and insulation 1.5 mm and 1 m in length
(Oil and heat resistant)
Weight Approx. 30 g

Detection Sensitivity

Model GIW
-1-5
GIW-
1H-5
GIW-
2-5
GIW-
3-5
GIW-
5-5
GIW-
7-5
GIW-
X3-5
GIW-
15-5
GIW-
20-5
GIW
-11-5
GIW-
1H1-5
GIW-
21-5
GIW-
31-5
GIW-
51-5
GIW-
71-5
GIW-
X31-5
GIW-
151-5
GIW-
201-5
Detection-
Sensitivity
30 Hz 1 G
± 25 %
1.5 G
± 20 %
2 G
± 20 %
3 G
± 20 %
5 G
± 20 %
7 G
± 20 %
10 G
± 20 %
15 G
± 20 %
20 G
± 20 %
100 Hz
Reference
2.0G
± 30 %
2.9 G
± 25 %
4.0 G
± 25 %
6.3 G
± 25 %
10.5 G
± 25 %
16.4 G
± 25 %
20.7 G
± 25 %
(70Hz) 
24.4 G
± 25 %
(60Hz) 
25.5 G
± 25 %
(50Hz) 

Note : Please feel free to consult us regarding any different requirements you may have to those specified above, for detection sensitivity,power voltage, output retenti

Reference Frequency Characteristics (Typical)

参考周波数特性EN_GIW-5.jpg

Dimensions/Output Circuit

Dimensions

GIW_EN.jpg

Output Circuit

回路図EN_GIW-5.jpg

Precautions during use

  1. Tighten the case with a torque of 0.32 N·m or less.
  2. The normal closed output type takes 100 ms maximum from power ON to output turn-ON.
  3. Thermal shock applied to the sensor during an abrupt temperature change can change the detection sensitivity.Ensure proper handling of the sensor.
  4. Usage when the cable is subjected to stress or vibration due to impacts may cause disconnection or malfunction. Secure the cable lead-out so that no stress or vibration can be applied.
  5. Because there is no reverse connection protection diode built-in, pay careful attention to the polarity of the power supply.
  6. For other precautions during use, refer to the General Precautions for shock sensor.

Note : For other detailed specifications, refer to the specification sheet of the corresponding model.

*After you have put an item in your shopping cart, choose either [Quote] or [Order].
*For customized products or specifications, contact us using "Inquiry."
*Choose the currency from JPY, USD, or EUR.

Model Name Operation Configuration Detection sensitivity Standard Price Inventory Type Select
GIW-1-5 Normally open 1 G
3,890 JPY
37 USD
33 EUR
BTO
GIW-1H-5 Normally open 1.5 G
3,890 JPY
37 USD
33 EUR
BTO
GIW-2-5 Normally open 2 G
3,890 JPY
37 USD
33 EUR
BTO
GIW-3-5 Normally open 3 G
3,890 JPY
37 USD
33 EUR
BTO
GIW-5-5 Normally open 5 G
3,890 JPY
37 USD
33 EUR
BTO
GIW-7-5 Normally open 7 G
3,890 JPY
37 USD
33 EUR
BTO
GIW-X3-5 Normally open 10 G
3,890 JPY
37 USD
33 EUR
BTO
GIW-15-5 Normally open 15 G
3,890 JPY
37 USD
33 EUR
BTO
GIW-20-5 Normally open 20 G
3,890 JPY
37 USD
33 EUR
BTO
GIW-11-5 Normally closed 1 G
3,890 JPY
37 USD
33 EUR
BTO
GIW-1H1-5 Normally closed 1.5 G
3,890 JPY
37 USD
33 EUR
BTO
GIW-21-5 Normally closed 2 G
3,890 JPY
37 USD
33 EUR
BTO
GIW-31-5 Normally closed 3 G
3,890 JPY
37 USD
33 EUR
BTO
GIW-51-5 Normally closed 5 G
3,890 JPY
37 USD
33 EUR
BTO
GIW-71-5 Normally closed 7 G
3,890 JPY
37 USD
33 EUR
BTO
GIW-X31-5 Normally closed 10 G
3,890 JPY
37 USD
33 EUR
BTO
GIW-151-5 Normally closed 15 G
3,890 JPY
37 USD
33 EUR
BTO
GIW-201-5 Normally closed 20 G
3,890 JPY
37 USD
33 EUR
BTO

STD Shipping is available immediately (on the day of order)

WIP Shipping is available within 1 to 3 weeks

BTO Shipping is available within 4 to 10 weeks

NOTE: The above information shows the typical delivery time. For actual delivery time, please confirm us as it depends on our business days and/or product quantities.

In the case of the quote request and order, please be sure to check the Terms and Conditions.
If you have made the procedure of quote request and order, it assumes that agree to the Terms and Conditions.

Go to page top