Model MG50-08-253 Long Magnetic Tape for Electromagnetic Sensor
Features
- Since no connection work is required, construction can be shortened for cost reduction.
- Since the back side is attached with double-sided tape, there is no need to embed a magnet. (MG50-08-253T only）
- It can be simply cut, so the length can be adjusted as required.
- Suitable for use as a magnetic sensor in Automated Guided Vehicles.
International Standards
- Our products do not have overseas safety regulations such as CE mark, UL standard, EN standard etc.
- Products is compliant to the RoHS directive.
* Please consult about "change of specification" and "request of specification" of the product.
Rating/Performance/Contour Diagram(Typical Example)
Rating / Performance
| Model |
MG50-08-253 |
MG50-08-253T | ||
|---|---|---|---|---|
| Polarity Distance | Front surface : N-pole | |||
| Magnet | Anisotropic rubber magnet (Ferrite magnet + Nitrile rubber copolymer) | |||
| Magnet Characteristics | Residual magnetic flux density (Br) 240 to 250 mT , Coercivity (bHC) 172 to 184 kA/m or more | |||
| Temperature Range | -20 to 80 °C (Without dew condensation or freezing) | |||
| Width | 50 mm | |||
| Thickness | 0.8 mm for magnet part only (Excluding double-sided tape) | |||
| Length | 25 ｍ | |||
| Back Surface | Without double-sided tape | With double-sided tape | ||
Contour Diagram (Typical Example)
Dimensions
Precautions During Use
-
When multiple magnets are installed side-by-side (as well as when several parts of a magnet that has been cut are installed together),place them so that the detection surface is composed of only sides that have the same pole.
- Note that if a strong magnetic field, such as those emitted by neodymium magnets, approaches the magnet, the magnetic field lines will change according to the magnetization or demagnetization.
- Do not use the magnets in an atmosphere where they are directly subject to organic solvents, chemicals, or corrosive gases since they are made of rubber.
- Thanks to the double-sided tape on the back side of the magnet, you just need to remove the release paper and stick the magnet to install it. (for MG50-08-253T)
*After you have put an item in your shopping cart, choose either [Quote] or [Order].
*For customized products or specifications, contact us using "Inquiry."
*Choose the currency from JPY, USD, or EUR.
| Model Name | Double-sided tape | Standard Price | Inventory Type | Select |
|---|---|---|---|---|
| MG50-08-253 | without |
158 USD
146 EUR
|
BTO | |
| MG50-08-253T | With |
188 USD
174 EUR
|
BTO |
STD Shipping is available immediately (on the day of order)
WIP Shipping is available within 1 to 3 weeks
BTO Shipping is available within 10 to 18 weeks
NOTE: The above information shows the typical delivery time. For actual delivery time, please confirm us as it depends on our business days and/or product quantities.
In the case of the quote request and order, please be sure to check the Terms and Conditions.
If you have made the procedure of quote request and order, it assumes that agree to the Terms and Conditions.
