• センサ、タッチセンサの日本語ページ
  • sensor,touch sensor English site
How It Works Shipping Fee Terms of Use

Model EIMW-1015AD Switching Type, Omni-directional Inclination Sensor NEW 

Application

  • (Movement in case of theft) anomaly detection of vehicle
  •  Inclination detection of agricultural equipment
  • Security of mechanical instruments

Features

  • The inclination angles ±10º and ±15º are always detected regardless of direction (e.g.: Long-side direction, short-side direction, 45º oblique direction, etc.).
  •  For open-drain output, can directly input to the microcomputer, etc. without the need for a special interface circuit.
  •  Because it is IP67 protection structure, you can also use in places where water splashes.
  • Resistant to irradiated electromagnetism thanks to its internal shield.
  • It is possible to handle standard angles other than the detection angle range of  ±10º, ±15º.

International Standards

  • Our products do not have overseas safety regulations such as CE mark, UL standard, EN standard etc.
  • Products is compliant to the RoHS directive.

Rating/Performance

Rating/Performance

Model EIMW-1015AD EIMW-1015AD1
Detection Inclination ± 10 ° and ±15 °
Output Deviation ± 1.0 °
Power Voltage 12 V to 24 V DC (Operating voltage range: 9.0 V to 30 V DC)
Power Consumption 10 mA DC or less
Output Nch MOSFET open drain 30 V DC, 150mA DC or less
Output Residual Voltage 1 V DC or less (150 mA DC)
Operation Status Normally open
(Output ON when inclination angle is detected)

Normally closed
(Output OFF when inclination angle is detected)

Response Time 0.8 s or less (Step response, and by placing the 90 % arrival time)
Temperature Range -20 to 70 °C (-20 to 75 °C during storage)
Humidity Range 35 to 95 % RH (35 to 95 % RH during storage)
Breakdown Voltage 500 V AC, 50/60 Hz for 1 min (Between live parts and mountings)
Insulation Resistance 100 MΩ or more, at 500 V DC megger (Between live parts and mountings)
Vibration Resistance Durability : 10 to 55 Hz, Double amplitude: 1.5 mm in X-, Y-, and Z-direction, each 2 hours (Device not powered)
Shock Resistance Durability : 1000 m/s² (Approx. 100 G) in X-, Y-, and Z-direction, each 3 times (Device not powered)
Ingress Protection IP67
Case Material ABS resin
Cable ø6.6, 4-core round cord of 0.5 mm² and insulation 1.9 mm and 1 m in length (VCTF)
Weight Approx. 89g

 

Dimensions/Output Circuit

Dimensions

EIMW-1015AD-外形寸法図EN.gif

Output Circuit

EIMW-1015AD-回路図EN.gif

 

 

Precautions During Use

Precautions During Use

  1. Do not subject the product to heavy shocks.
  2. Since a power-on reset circuit is built in, the device will not be able to detect tilt angles for about 1.2 seconds after powering on.
  3. Even if the inclination angle is less than the detection angle, inclination may be detected because of acceleration or impact.
  4.  For other precautions, refer to “General Precautions” for Inclination sensors.


*After you have put an item in your shopping cart, choose either [Quote] or [Order].
*For customized products or specifications, contact us using "Inquiry."
*Choose the currency from JPY, USD, or EUR.

Model Name Output configuration Standard Price Inventory Type Select
EIMW-1015AD Normally open
12,400 JPY
115 USD
105 EUR
BTO
EIMW-1015AD1 Normally closed
12,400 JPY
115 USD
105 EUR
BTO

STD Shipping is available immediately (on the day of order)

WIP Shipping is available within 1 to 3 weeks

BTO Shipping is available within 4 to 10 weeks

NOTE: The above information shows the typical delivery time. For actual delivery time, please confirm us as it depends on our business days and/or product quantities.

In the case of the quote request and order, please be sure to check the Terms and Conditions.
If you have made the procedure of quote request and order, it assumes that agree to the Terms and Conditions.

Go to page top