How It Works Shipping Fee Terms of Use

Model MDS-G4-5 High Speed Response Groove(U) Type Inductive Sensor

Application

  • Detection of coins for ATM and vending machines
  • Detection of tokens of amusement equipment
  • Rotational speed detection using a metal sheet gear

Features

  • The inductive sensor has an open collector output for simple operation.
  • Detects the passage of all types of metals, medals and coins.
  • Perfect to detect the number of rotations of metal sheet slitters or gears.
  • Supports high-speed detection.
  • The unit is equipped with a LED display for clear indication of operation status.

International Standards

  • Our products do not have overseas safety regulations such as CE mark, UL standard, EN standard etc.
  • Products is compliant to the RoHS directive.

* Please consult about "change of specification" and "request of specification" of the product.

Rating/Performance

Rating / Performance

Model MDS-G4-5
Detection Groove Width 4 mm
Detection Distance *6 mm ± 10 % (Distance between the inductive target and the bottom of the sensor groove)
Standard Detection
Target
Iron sheet of 15 × 15 mm and 1 mm in thickness
Hysteresis *0.8 mm or less
Power Supply Voltage 5 V DC (Operating voltage range : 4.5 V to 5.5 V DC)
Current Consumption 6 mA DC or less
Output NPN transistor open collector 30 V DC, 50 mA DC or less
Output Residual Voltage 1 V DC or less (Load current 50 mA DC)
Operation Status Normally open (ON output when detecting)
Operation Indicator Red LED (Lit when the output is ON)
Response Frequency 5 kHz or more (Detector width : 5 mm or more, Width of tooth space : 5 mm or more, Thickness : 1 mm)
Temperature Range -10 to 60 °C (-20 to 65 °C storage temperature range)(Without dew condensation or icing)
Humidity Range 85 % RH or less (85 % RH or less storage humidity range)(Without dew condensation)
Dielectric Strength 500 V AC 1 minute (Between the live part and case)
Insulation Resistance 50 MΩ or more, at 500 V DC megger (Between the live part and case)
Vibration Resistance 10 to 55 Hz, 1.5 mm double amplitude in X, Y and Z directions for 2 hours each (at power off)
Shock Resistance 500 m/s² (Approx. 50 G) in X, Y and Z directions 10 times each (at power off)
Protection IP67
Case Material Polyarylate
Cable
Cable : ø4, 3-core round cord of 0.15 mm² and insulation 1.1 mm and 1 m in length (Oil and heat resistant vinyl)
Weight Approx. 32 g

Detection Distance Conditions

ST-MDS-G4-5_EN_03.jpg

Insert the standard detection target at the center of the detection sensor groove to measure.
Standard detection target : Iron sheet 15 mm × 15 mm × t=1 mm
Detection distance : Distance from the sensor ON point to the groove bottom surface
Hysteresis : Distance between the ON point and the OFF point

Outline Dimensions/Connector Harnes/Output Circuit

Outline Dimensions

ST-MDS-G4-5_EN_06.jpg

Connector Harness (Sold Separately)

SZH-3-300-EN.gif

Output Circuit

ST-MDS-G4-5_EN_11.jpg

Precautions During Use

Influence of Surrounding Metal

If there are metal objects around the inductive sensor, leave at least the space indicated in the figure below between them and the sensor.

 
MDS-G4_Influence_of_surrounding_metal.gif

Mutual Interference

If you use a number of the same product, separate them at least by the distances shown in the figure below to prevent reciprocal interference.
 
MDG-G4相互干渉.jpg

Mounting

Always use plain washers to tighten the case and use a torque of 0.5 N·m or less.

Other

See inductive sensor general Precautions During Use for other precautions.

 

*After you have put an item in your shopping cart, choose either [Quote] or [Order].
*For customized products or specifications, contact us using "Inquiry."
*Choose the currency from JPY, USD, or EUR.

Model Name Standard Price Inventory Type Select
MDS-G4-5
37 USD
35 EUR
STD

STD Shipping is available immediately (on the day of order)

WIP Shipping is available within 1 to 3 weeks

BTO Shipping is available within 10 to 18 weeks

NOTE: The above information shows the typical delivery time. For actual delivery time, please confirm us as it depends on our business days and/or product quantities.

In the case of the quote request and order, please be sure to check the Terms and Conditions.
If you have made the procedure of quote request and order, it assumes that agree to the Terms and Conditions.

Part number index

Product Comparison Table

confirmation of the estimate request content

Proximity sensor

Go to page top