• センサ、タッチセンサの日本語ページ
  • sensor,touch sensor English site
How It Works Shipping Fee Terms of Use

Model RHS Humidity Sensor NEW 

Application

  • Humidity control in food processing facilities
  • Humidity control in air-conditioning equipment
  • Humidity control in pharmaceutical factories
  • Humidity control in clean rooms
  • Humidity control for musical instruments
  • Humidity control in plant factories
  • Humidity control in greenhouses/fermentation chambers
  • Humidity control in museums, sample chambers, warehouses
     

Features

  • A small-sized high precision, humidity sensor with switching output.
  • Detection humidity of 40 % to 80 % RH are available.
  • The unit is equipped with a Red LED display for operation indication.
  • Easy to maintain connector type is used.
  • M3 screws facilitate easy installation.

International Standards

  • Our products do not have overseas safety regulations such as CE mark, UL standard, EN standard etc.
  • Products is compliant to the RoHS directive.

* Please consult about "change of specification" and "request of specification" of the product.

Rating/Performance

Rating/Performance

Model RHS-40 RHS-60 RHS-80 RHS-40-5V RHS-60-5V RHS-80-5V
Detection Sensor Humidity
Detection Humidity 40 % RH 60 % RH 80 % RH 40 % RH 60 % RH 80 % RH
Humidity Range 0 to 85 % RH
Standard Humidity Accuracy ±5 % in the RH 25 ºC (20 to 80 % RH)
Hysteresis ±10 % or less of the detection humidity
Humidity Response Time 60 sec (τ 63 %)
Power Voltage 12 V to 24 V DC 5 V DC
Operating Voltage Range 10 V to 30 V DC 4.5 V to 5.5 V DC
Power Consumption 0.5 mA DC or less
Output N-channel MOSFET Open drain 30 V DC, 50 mA DC or less
Operation Indication With detection humidity or more , red LED ON
Storage Temperature -10 to 60 ºC (Without dew condensation)
Storage Humidity 80 % RH or less (Without dew condensation)
Breakdown Voltage 500 V AC, 50/60 Hz for 1 min (Between live parts and the case)
Insulation Resistance 50 MΩ or more, at 500 V DC megger (Between live parts and the case)
Vibration Resistance Durability : 10 to 55 Hz, Double amplitude: 1.5 mm in X-, Y-, and Z-direction,
each 2 hours (Device not powered)
Shock Resistance Durability : 200 m/s² (Approx. 20 G) in X-, Y-, and Z-direction,
each 3 times (Device not powered)
Ingress Protection IP50
Case Material Polyarylate
Connector Connector: S3B-EH (3-pin), Housing: EHR-3, Contact: SEH-001T-P0.6
(From J.S.T. Mfg. Co., Ltd.)
Weight Approx. 5 g
Options Connector harness : CNH-S3B03S26-300 (Separately supplied)

 

Dimensions/Output Circuit

Dimensions

RHS-外形寸法図EN.jpg

Output Circuit

RHS-回路図EN.jpg

 

Usage precautions

Usage precautions

  • When the sensor is not used, to maintain the precision, it is recommended to store it in the delivered package (in the closed anti-static bag) without opening under the following conditions :
                     Temperature range: 10 to 50 ºC
                     Humidity range: 20 to 60 % RH
    Do not use antistatic polyethylene bags (light blue, pink or rose pink color).
  • The relative humidity value greatly depends on the humidity condition.
    When measuring the surrounding temperature/humidity, be sure to confirm there is no heated part on the installation surface.
  • Use M3 pan head screws for mounting.
    The tightening torque for the case should be 0.5 N·m or less.
  • This sensor cannot be used in dew condensation conditions.
    If this is the case, refer to the RHT series.
  • Do not use the sensor in the following environmental conditions:
    - Where there is water or moisture
    - Where there are corrosive gases
    - Where there is oil  
    - In freezing temperatures or dew condensation
    - Dusty locations
    - A place exposed to direct sunlight or radiated heat"
  • Vacuum away any serious dust contamination or else a malfunction may result.
  • For other precautions, refer to “General Precautions” for infrared temperature sensors.

*After you have put an item in your shopping cart, choose either [Quote] or [Order].
*For customized products or specifications, contact us using "Inquiry."
*Choose the currency from JPY, USD, or EUR.

Model Name Detection Humidity Standard Price Inventory Type Select
RHS-40-5V 40 % RH
3,360 JPY
32 USD
28 EUR
WIP
RHS-60-5V 60 % RH
3,360 JPY
32 USD
28 EUR
WIP
RHS-80-5V 80 % RH
3,360 JPY
32 USD
28 EUR
WIP
Model Name Detection Humidity Standard Price Inventory Type Select
RHS-40 40 % RH
3,360 JPY
32 USD
28 EUR
WIP
RHS-60 60 % RH
3,360 JPY
32 USD
28 EUR
WIP
RHS-80 80 % RH
3,360 JPY
32 USD
28 EUR
WIP

STD Shipping is available immediately (on the day of order)

WIP Shipping is available within 1 to 3 weeks

BTO Shipping is available within 4 to 10 weeks

NOTE: The above information shows the typical delivery time. For actual delivery time, please confirm us as it depends on our business days and/or product quantities.

In the case of the quote request and order, please be sure to check the Terms and Conditions.
If you have made the procedure of quote request and order, it assumes that agree to the Terms and Conditions.

Quantity:
pieces pieces
  • 90 JPY
    1 USD
    1 EUR
  • 90 JPY
    1 USD
    1 EUR

To confirm the Request a quote / Order Cart

Go to page top