• センサ、タッチセンサの日本語ページ
  • sensor,touch sensor English site
How It Works Shipping Fee Terms of Use

Model MDS-F5U-5V Proximity sensor NEW 

Application

  • Positioning of the processing machines
  • Position detection of the moving table and metal pallets
  • There is no space, the magnetic detection of a narrow place

Features

  • Small flat proximity sensor with a detection surface of 18 mm and a detection distance of 5 mm 
    (upper surface detection type)
  • Molded type that can be used safely even in places where water may splash.

International Standards

  • Our products do not have overseas safety regulations such as CE mark, UL standard, EN standard etc.
  • Products is compliant to the RoHS directive.

Rating and performance / Characteristics graph

Rating and performance

Model name MDS-F5U-5V MDS-F5U1-5V
Detection surface Upper side detection
Detection distance 5mm±10%
Hysteresis 20% or less of the detection distance
Set distance 0 to 4.0 mm
Standard detection target Iron plate of 18 × 18 mm and 1 mm in thickness
Power supply voltage 5 V DC (Operating voltage range: 4.5 V to 5.5 V DC)
Power consumption 10 mA DC or less
Output NPN transistor open collector 30 V DC, 100 mA DC or less
Output residual voltage 1V DC or less  (Load current 100 mA DC and a 1-meter cord)
Operation configuration Normally open
(On output with detection target)
Normally closed
(Off output with detection target)
Operation display Red LED (lit when On output)
Response frequency 500 Hz or more
Operating temperature range -25 to 70 °C (-25 to 70 °C during storage)
Operating humidity range 35 to 95% RH (35 to 95% RH during storage)
Withstand voltage 1 min at AC 1000 V 50/60 Hz (between the live part and case)
Insulation resistance 50 MΩ or more measured with an ohmmeter at DC 500 V
(between the live part and case)
Vibration resistance Durability: 10 to 55 Hz, Double amplitude: 1.5 mm in X-, Y-, and Z-direction, each 2 hours (Device not powered)
Shock resistance Durability: 500 m/s² (Approx. 50 G) in X-, Y-, and Z-direction, each 3 times (Device not powered)
Ingress Protection IP67
Case material Polyarylate
Cable ø3, 3-core round cord of 0.15 mm² and 1 m in length (oil and heat resistant)
Weight Approx. 20 g

*For a detailed specification of the other, please refer to specifications.

Characteristics graph (typical example)

MDS-F5U_Characteristics_graph.gif

 

External dimensions diagram / Output circuit

Dimensions

MDS-F5U-5V_外形寸法図EN.jpg

Output circuit

5V回路図_EN.jpg

*Because there is no reverse connection protection diode built-in, pay careful attentionto the polarity of the power supply.

Usage precautions

Influence of surrounding metal

If there are metal objects around the proximity sensor,
leave at least the space indicated in the figure below between them and the sensor.

 
mds-f5u_周囲金属.gif

Mutual interference

If you use two or more of the same product,
separate them at least by the distances shown in the figure below to prevent reciprocal interference.
(Sensors with a different frequency are indicated with a B after the model name.)

 
mds-f5u_周波数.gif
 

Other

Always use plain washers to tighten the case and use a torque of 0.5 N.m or less.

See proximity sensor general usage precautions for other precautions.

 

*After you have put an item in your shopping cart, choose either [Quote] or [Order].
*For customized products or specifications, contact us using "Inquiry."
*Choose the currency from JPY, USD, or EUR.

Model Name Output configuration Frequency Standard Price Inventory Type Select
MDS-F5U-5V Normally open Normal type
1,710 JPY
16 USD
15 EUR
STD
MDS-F5UB-5V Normally open Different frequency type
1,710 JPY
16 USD
15 EUR
BTO
MDS-F5U1-5V Normally closed Normal type
1,710 JPY
16 USD
15 EUR
STD
MDS-F5U1B-5V Normally closed Different frequency type
1,710 JPY
16 USD
15 EUR
STD

STD Shipping is available immediately (on the day of order)

WIP Shipping is available within 1 to 3 weeks

BTO Shipping is available within 4 to 10 weeks

NOTE: The above information shows the typical delivery time. For actual delivery time, please confirm us as it depends on our business days and/or product quantities.

In the case of the quote request and order, please be sure to check the Terms and Conditions.
If you have made the procedure of quote request and order, it assumes that agree to the Terms and Conditions.

Go to page top