Model MDS-Q10-5V Inductive Sensor
- Product catalog download
- 3D PDF Download
- MDS-Q10-5V Download the CAD data (DXF / Parasolid / STEP / IGES)
Application
- Positioning of the processing machines
- Position detection of the moving table and metal pallets
Features
- Easy mounting : square and can be installed directly on metal surfaces.
- Molded type that can be used safely even in places where water may splash.
-
Inductive sensor with a detection surface of 30 × 30 mm and a detection distance of 10 mm(Front side detection type)
International Standards
- Our products do not have overseas safety regulations such as CE mark, UL standard, EN standard etc.
- Products is compliant to the RoHS directive.
* Please consult about "change of specification" and "request of specification" of the product.
Rating/Performance/Characteristics Graph
Rating / Performance
| Model | MDS-Q10-5V | MDS-Q101-5V |
|---|---|---|
| Detection Surface | Front side detection | |
| Detection Distance | 10 mm ±10 % | |
| Hysteresis | 10% or less of the detection distance | |
| Set Distance | 0 to 8.0 mm | |
| Standard Detection Target |
Iron sheet of 40 × 40 mm and 1 mm in thickness | |
| Power Supply Voltage | 5 V DC (Operating voltage range : 4.5 V to 5.5 V DC) | |
| Current Consumption | 10 mA DC or less | |
| Output | NPN transistor open collector 30 V DC, 100 mA DC or less | |
| Output Residual Voltage | 1 V DC or less (Load current 100 mA DC and a 1-meter cord) | |
| Operation Status | Normally open (ON output when detecting) |
Normally closed (OFF output when detecting) |
| Operation Indicator | Red LED (Lit when the output is ON) | |
| Response Frequency | 300 Hz or more | |
| Temperature Range | -25 to 70 °C (-25 to 70 °C storage temperature range) (Without dew condensation or icing) |
|
| Humidity Range | 35 to 95% RH (35 to 95% RH storage humidity range)(Without dew condensation) | |
| Dielectric Strength | 1000 V AC for 1 minute (Between the live part and case) | |
| Insulation Resistance | 50 MΩ or more at 500 V DC megger (Between the live part and case) | |
| Vibration Resistance | 10 to 55 Hz, 1.5 mm double amplitude in X, Y and Z directions for 2 hours each (at power off) | |
| Shock Resistance | 500 m/s² (Approx. 50 G) in X, Y and Z directions 3 times each (at power off) | |
| Protection | IP67 | |
| Case Material | ABS | |
| Cable | ø6, 3-core round cord of 0.5 mm² and 1 m in length (Oil and heat resistant vinyl) | |
| Weight | Approx. 100 g | |
Characteristics Graph (Typical Example)
Outline Dimensions/Output Circuit
Outline Dimensions
Output Circuit
*Because there is no reverse connection protection diode built-in, pay careful attentionto the polarity of the power supply.
Precautions During Use
Influence of Surrounding Metal
If there are metal objects around the inductive sensor, leave at least the space indicated in the figure below between them and the sensor.
Mutual Interference
Mounting
Always use plain washers to tighten the case and use a torque of 1.2 N·m or less.
Other
See inductive sensor general precautions during use for other precautions.
*After you have put an item in your shopping cart, choose either [Quote] or [Order].
*For customized products or specifications, contact us using "Inquiry."
*Choose the currency from JPY, USD, or EUR.
| Model Name | Output configuration | Frequency | Standard Price | Inventory Type | Select |
|---|---|---|---|---|---|
| MDS-Q10-5V | Normally open | Normal type |
22 USD
20 EUR
|
WIP | |
| MDS-Q10B-5V | Normally open | Different frequency type |
22 USD
20 EUR
|
STD | |
| MDS-Q101-5V | Normally closed | Normal type |
22 USD
20 EUR
|
STD | |
| MDS-Q101B-5V | Normally closed | Different frequency type |
22 USD
20 EUR
|
STD |
STD Shipping is available immediately (on the day of order)
WIP Shipping is available within 1 to 3 weeks
BTO Shipping is available within 10 to 18 weeks
NOTE: The above information shows the typical delivery time. For actual delivery time, please confirm us as it depends on our business days and/or product quantities.
In the case of the quote request and order, please be sure to check the Terms and Conditions.
If you have made the procedure of quote request and order, it assumes that agree to the Terms and Conditions.
