• センサ、タッチセンサの日本語ページ
  • sensor,touch sensor English site
How It Works Shipping Fee Terms of Use

Model MDS-Q5-5V Proximity sensor

Application

  • Positioning of the processing machines
  • Position detection of the moving table and metal pallets

Features

  • Easy installation: square and can be installed directly on metal surfaces.
  • Molded type that can be used safely even in places where water may splash.
  • Small proximity sensor with a detection surface of 17 × 17 mm and a detection distance of 5 mm
    (front side detection type)

International Standards

  • Our products do not have overseas safety regulations such as CE mark, UL standard, EN standard etc.
  • Products is compliant to the RoHS directive.

Rating and performance / Characteristics graph

Rating and performance

Model name MDS-Q5-5V MDS-Q51-5V
Detection surface Front side detection
Detection distance 5 mm ±10 %
Hysteresis 20% or less of the detection distance
Set distance 0 to 4.0 mm
Standard detection
target
Iron plate of 17 × 17 mm and 1 mm in thickness
Power supply voltage 5 V DC (Operating voltage range: 4.5 V to 5.5 V DC)
Power consumption 10 mA DC or less
Output NPN transistor open collector 30 V DC, 100 mA DC or less
Output residual voltage 1V DC or less (Load current 100 mA DC and a 1-meter cord)
Operation configuration Normally open
(On output with detection target)
Normally closed
(Off output with detection target)
Operation display Red LED (lit when On output)
Response frequency 500 Hz or more
Operating temperature
range
-25 to 70 °C (-25 to 70 °C during storage)
Operating humidity
range
35 to 95% RH (35 to 95% RH during storage)
Withstand voltage 1000 V AC, 50/60 Hz for 1 min (Between live parts and the case)
Insulation resistance 50 MΩ or more, at 500 V DC megger (Between live parts and the case)
Vibration resistance Durability: 10 to 55 Hz, Double amplitude: 1.5 mm in X-, Y-, and Z-direction, each 2 hours (Device not powered)
Shock resistance Durability: 500 m/s² (Approx. 50 G) in X-, Y-, and Z-direction, each 3 times (Device not powered)
Ingress Protection IP67
Case material ABS
Cable ø4, 3-core round cord of 0.2 mm² and 1 m in length (oil and heat resistant)
Weight Approx. 30 g

*For a detailed specification of the other, please refer to specifications.

Characteristics graph (typical example)

MDS-Q5_Characteristics_graph_(typical_example).gif

 

Dimensions / Output circuit

Dimensions

MDS-Q5-5V_外形寸法図EN.jpg

Output circuit

 

5V回路図_EN.jpg*Because there is no reverse connection protection diode built-in, pay careful attentionto the polarity of the power supply.

 

Usage precautions

Influence of surrounding metal

If there are metal objects around the proximity sensor, leave at least the space indicated in the figure below between them and the sensor.

 
MDS-Q5_Influence_of_surrounding_metal.gif

Mutual interference

If you use two or more of the same product, separate them at least by the distances shown in the figure below to prevent reciprocal interference.
(Sensors with a different frequency are indicated with a B after the model name.)
 
MDS-Q5_Mutual_interference.gif

Installation

Tighten the case with a torque of 0.59 N·cm (6 kgf·cm) or less.

Other

See proximity sensor general usage precautions for other precautions.

 

*After you have put an item in your shopping cart, choose either [Quote] or [Order].
*For customized products or specifications, contact us using "Inquiry."
*Choose the currency from JPY, USD, or EUR.

Model Name Output configuration Frequency Standard Price Inventory Type Select
MDS-Q5-5V Normally open Normal type
1,710 JPY
16 USD
15 EUR
STD
MDS-Q5B-5V Normally open Different frequency type
1,710 JPY
16 USD
15 EUR
STD
MDS-Q51-5V Normally closed Normal type
1,710 JPY
16 USD
15 EUR
STD
MDS-Q51B-5V Normally closed Different frequency type
1,710 JPY
16 USD
15 EUR
STD

STD Shipping is available immediately (on the day of order)

WIP Shipping is available within 1 to 3 weeks

BTO Shipping is available within 4 to 10 weeks

NOTE: The above information shows the typical delivery time. For actual delivery time, please confirm us as it depends on our business days and/or product quantities.

In the case of the quote request and order, please be sure to check the Terms and Conditions.
If you have made the procedure of quote request and order, it assumes that agree to the Terms and Conditions.

Part number index

Product Comparison Table

confirmation of the estimate request content

Proximity sensor

Go to page top