• センサ、タッチセンサの日本語ページ
  • sensor,touch sensor English site
How It Works Shipping Fee Terms of Use

Model DTS/DTM Open/Close Monitoring Sensor

Application

  • By detecting the opening and closing of the door, such as a food factory to prevent fraud and theft.
  • Open and close monitoring of the entrance door, such as drawers and safe.
  • Opening and closing and fault monitoring of the automatic door.
  • Monitoring of rack door open/close in the data center
  • Monitoring of door open/close on the slot machine

Features

  • Small type for an easy installation even in shallow and narrow places.
  • Molded type that can be used safely even in places where water may splash.
  • In order to avoid malfunction in the commercially available magnet, it is equipped with many sensors.
  • The DWS door monitoring sensor is added to the sensor circuit, to furtuer prevent any erroneous detection.

International Standards

  • Our products do not have overseas safety regulations such as CE mark, UL standard, EN standard etc.
  • Products is compliant to the RoHS directive.

Rating and performance

Rating and performance

Model DTS-1 DTS-2
Detection Surface Front side detection
Detection Distance 3.5 mm or more
Set Distance 0 to 3 mm
Standard Detection 
Target
DTM-1 DTM-2
Power Voltage 10 V to 30 V DC
Power Consumption 10 mA DC or less
Output Nch MOSFET open drain 30 V DC, 50 mA DC or less
Output
Residual Voltage
1 V DC or less (Load current 50 mA DC ) 
Operation Status Normally open, on output with specified magnetic code (standard detection target)
Response time 200 ms or less
Temperature Range -10 to 60 °C (-20 to 70 °C during storage)
Humidity Range 95% RH or less (95% RH or less during storage)
Breakdown Voltage 1000 V AC, 50/60 Hz for 1 min (Between live parts and the case)
Insulation Resistance 100 MΩ or more, at 500 V DC megger (Between live parts and the case)
Vibration Resistance Durability: 10 to 55 Hz, Double amplitude: 1.5 mm in X-, Y-, and Z-direction, each 2 hours (Device not powered)
Shock Resistance Durability: 3 times at 500 m/s² in each X, Y, Z direction (at power off)
Protection Rating With protection diodes to protect the sensor from reverse connection to the power supply and output surges
Ingress Protection IP67
Case Material ABS
Cable ø3, 3-core round cord of 0.3 mm² and 1 m in length (oil and heat resistant)
Weight Approx. 24 g (DTM: Approx. 9 g)

*For a detailed specification of the other, please refer to specifications.

External dimensions diagram / Output circuit

External dimensions diagram

DWS_External_dimensions_diagram.gif


DTM-1DTM-2_外形寸法図EN.gif

Output circuit

DWS_Output_circuit.gif

Usage precautions

Usage precautions

  • Always use a standard detector DTM-1 in the DTS-1, using the standard detector DTM-2 in the DTS-2.
    It does not operate a combination of DTM-1 to DTM-2 and DTS-2 to DTS-1.
    Please attach so as to be parallel to the DTS and DTM at the time of detection. 
  • In 0.59N/m (6kgf /cm) or less of torque, installed in two of the M3 screw.

*After you have put an item in your shopping cart, choose either [Quote] or [Order].
*For customized products or specifications, contact us using "Inquiry."
*Choose the currency from JPY, USD, or EUR.

Model Name Magnetic code Standard Price Inventory Type Select
DTS-1 Magnetic code 1 (sensor)
3,600 JPY
34 USD
32 EUR
BTO
DTS-2 Magnetic code 2 (sensor)
3,600 JPY
34 USD
32 EUR
BTO
Model Name 磁気コード Standard Price Inventory Type Select
DTM-1 Magnetic code 2 (Magnet)
1,000 JPY
10 USD
9 EUR
BTO
DTM-2 Magnetic code 2 (Magnet)
1,000 JPY
10 USD
9 EUR
BTO

STD Shipping is available immediately (on the day of order)

WIP Shipping is available within 1 to 3 weeks

BTO Shipping is available within 4 to 10 weeks

NOTE: The above information shows the typical delivery time. For actual delivery time, please confirm us as it depends on our business days and/or product quantities.

In the case of the quote request and order, please be sure to check the Terms and Conditions.
If you have made the procedure of quote request and order, it assumes that agree to the Terms and Conditions.

Go to page top