Model DTS/DTM Open/Close Monitoring Sensor
- Product catalog download
- 3D PDF Download
- 3D PDF Download
- DTS Download the CAD data (DXF / Parasolid / STEP / IGES)
- DTM Download the CAD data (DXF / Parasolid / STEP / IGES)
Application
- By detecting the opening and closing of the door, such as a food factory to prevent fraud and theft.
-
Open and close monitoring of the entrance door, such as drawers and safe.
- Opening and closing and fault monitoring of the automatic door.
- Monitoring of rack door open/close in the data center
- Monitoring of door open/close on the slot machine
Features
- Small type for an easy installation even in shallow and narrow places.
- Molded type that can be used safely even in places where water may splash.
- In order to avoid malfunction in the commercially available magnet, it is equipped with many sensors.
- The DWS door monitoring sensor is added to the sensor circuit, to furtuer prevent any erroneous detection.
International Standards
- Our products do not have overseas safety regulations such as CE mark, UL standard, EN standard etc.
- Products is compliant to the RoHS directive.
* Please consult about "change of specification" and "request of specification" of the product.
Rating and Performance
Rating and Performance
Model | DTS-1 | DTS-2 |
---|---|---|
Detection Surface | Front side detection | |
Detection Distance | 3.5 mm or more | |
Set Distance | 0 to 3 mm | |
Standard Detection
Target
|
DTM-1 | DTM-2 |
Power Voltage | 12 V to 24 V DC (Operating voltage range : 10 V to 30 V DC) | |
Power Consumption | 10 mA DC or less | |
Output | Nch MOSFET open drain 30 V DC, 50 mA DC or less | |
Output
Residual Voltage
|
1 V DC or less (Load current 50 mA DC ) | |
Operation Status | Normally open, on output with specified magnetic code (Standard detection target) |
|
Response time | 200 ms or less | |
Temperature Range | -10 to 60 °C (-20 to 70 °C during storage) (Without dew condensation or freezing) |
|
Humidity Range | 95% RH or less (95% RH or less during storage)(Without dew condensation) | |
Breakdown Voltage | 1000 V AC, 50/60 Hz for 1 min (Between live parts and the case) | |
Insulation Resistance | 100 MΩ or more, at 500 V DC megger (Between live parts and the case) | |
Vibration Resistance | Durability: 10 to 55 Hz, Double amplitude: 1.5 mm in X-, Y-, and Z-direction, each 2 hours (Device not powered) | |
Shock Resistance | Durability: 3 times at 500 m/s² in each X, Y, Z direction (At power off) | |
Ingress Protection | IP67 | |
Case Material | ABS | |
Cable | ø3, 3-core round cord of 0.3 mm² and 1 m in length (Oil and heat resistant) | |
Weight | Approx. 24 g (DTM: Approx. 9 g) |
*For a detailed specification of the other, please refer to specifications.
External Dimensions Diagram / Output Circuit
External Dimensions Diagram
Output Circuit
Usage Precautions
-
Always use a standard detector DTM-1 in the DTS-1, using the standard detector DTM-2 in the DTS-2.It does not operate a combination of DTM-1 to DTM-2 and DTS-2 to DTS-1.Please attach so as to be parallel to the DTS and DTM at the time of detection.
-
In 0.59N/m (6kgf /cm) or less of torque, installed in two of the M3 screw.
-
See Electromagnetic sensor general usage precautions for other precautions.
*After you have put an item in your shopping cart, choose either [Quote] or [Order].
*For customized products or specifications, contact us using "Inquiry."
*Choose the currency from JPY, USD, or EUR.
Model Name | Magnetic code | Standard Price | Inventory Type | Select |
---|---|---|---|---|
DTS-1 | Magnetic code 1 (sensor) |
35 USD
32 EUR
|
STD | |
DTS-2 | Magnetic code 2 (sensor) |
35 USD
32 EUR
|
BTO |
Model Name | Magnetic code | Standard Price | Inventory Type | Select |
---|---|---|---|---|
DTM-1 | Magnetic code 2 (Magnet) |
10 USD
9 EUR
|
WIP | |
DTM-2 | Magnetic code 2 (Magnet) |
10 USD
9 EUR
|
BTO |
STD Shipping is available immediately (on the day of order)
WIP Shipping is available within 1 to 3 weeks
BTO Shipping is available within 10 to 18 weeks
NOTE: The above information shows the typical delivery time. For actual delivery time, please confirm us as it depends on our business days and/or product quantities.
In the case of the quote request and order, please be sure to check the Terms and Conditions.
If you have made the procedure of quote request and order, it assumes that agree to the Terms and Conditions.