• センサ、タッチセンサの日本語ページ
  • sensor,touch sensor English site
How It Works Shipping Fee Terms of Use

Model GIS Compact Security Shock Sensor, Power Voltage 5 V DC

Application

  • Vibration monitoring for electronic devices
  • Monitoring of vibration to the game machine
  • Security of mechanical instruments
  • Security of structures

Features

  • Monitors simple impacts caused intentionally. Avoid incorrect detection remove in high frequencies.
  • Uses connector with lock for prevent the missing connector according to routing of the wire or vibration.
  • Perfect installed on glass windows to monitor impacts for security or on game machines to detect inappropriate actions such as a hit.
  • Can detect instant impacts and output them for more than 200 ms using a multivibrator circuit.

International Standards

  • Our products do not have overseas safety regulations such as CE mark, UL standard, EN standard etc.
  • Products is compliant to the RoHS directive.

Rating/Performance/Frequency Characteristics

Rating/Performance

Model GIS-*5 GIS-*15
Power Voltage 5 V DC ±5%(absolute maximum rating:30 V DC *1)
Power Consumption 6 mA DC or less
Output N-channel MOSFET Open drain NPN bipolar transistor, Open collector
30 V DC, 50 mA DC or less, (Output is available 700 ms from power ON)
Output-Residual Voltage 1 V DC or less (Load current 50 mA DC)
Operation Status Normally open
(Output ON when shock is detected)
Normally closed
(Output OFF when shock is detected)
Output Hold Time
Omentary Shock Input ON for at least 200 ms
(When input time is 3 ms or more)
ON for 200 ms or less
(When input time is less than 3 ms)
OFF for at least 200 ms
(When input time is 3 ms or more)
OFF for 200 ms or less
(When input time is less than 3 ms)
At Continuous
Shock Input
Continuous ON Continuous OFF
Detection Frequency 10 Hz to 1 kHz
Response Time 4 ms or less
Circuit Protection Back-flow protection diode and output surge absorption diode
Temperature Range -10 ºC to 60 ºC (At storage: -15 ºC to 65 ºC) (No freezing or condensation)
Humidity Range 85% RH or less (At storage: 85 % RH or less) (No freezing or condensation)
Breakdown Voltage 500 V AC, 50/60 Hz for 1 min (Between live parts and mountings)
Insulation Resistance 20 MΩ or more, At 500 V DC megger (and mountings) Between live parts
Vibration Resistance Durability: 10 to 55 Hz, Double amplitude: 1.5 mm in X-, Y-, and Z-direction, each 2 hours (Device not powered)
Shock Resistance Durability: 500 m/s² (Approx. 50 G) in X-, Y-, and Z-direction, each 3 times (Device not powered)
Ingress Protection Class IP50
Case Material Glass reinforced ABS resin
Connector Connector: SM03B-GHS(3-pin), Housing: GHR-03V-S, Contact: SSHL-002T-P0.2 (Manufactured by J.S.T Connector)
Weight Approx. 4 g
Options
(separately supplied)
Connector harness: CNH-GHR03S28-300

*1 : It is a limit value with which the product is free from breakage. It does not guarantee the above-mentioned rating/performance.

Detection Sensitivity

Model GIS-15 GIS-1H5 GIS-25 GIS-35 GIS-55 GIS-75 GIS-X35 GIS-205
GIS-115 GIS-1H15 GIS-215 GIS-315 GIS-515 GIS-715 GIS-X31 GIS-201
Detection-
Sensitivity
30 Hz 1 G
± 25 %
1.5 G
± 20 %
2 G
± 20 %
3 G
± 20 %
5 G
± 20 %
7 G
± 20 %
10 G
± 20 %
20 G
± 20 %
100 Hz
Reference
2.0G
± 30 %
3.1 G
± 25 %
4.1 G
± 25 %
6.3 G
± 25 %
10.6 G
± 25 %
15.4 G
± 25 %
21.3 G
± 25 %
70 Hz 
26.7 G
± 25 %
50Hz 

Note : Please feel free to consult us regarding any different requirements you may have to those specified above, for detection sensitivity,power voltage, output retention time and response speed.

Reference Frequency Characteristics (Typical Example)

GIS-15_RFC.gif

Dimensions/Output Circuit

Dimensions

GIS-1_Dimensions.gif

Connector harness(separately supplied)

CNH-GHR03S28-300.gif

Output Circuit

GIS-15_OC.gif

Precautions during use

  1. Tighten the case with a torque of 0.5 N.m or less.
  2. The normal closed output type takes 300 ms maximum from power ON to output turn-ON.
  3. Thermal shock applied to the sensor during an abrupt temperature change can change the detection sensitivity.Ensure proper handling of the sensor.
  4. Avoid subjecting the sensor wire harness to mechanical stress while connecting to the connector or allowingvibration to transferred from impact, otherwise disconnection or malfunction may result. Support the harness lead-out so that it is not subjected to excessive stress or vibration.
  5. Because there is no reverse connection protection diode built-in, pay careful attention to the polarity of the power supply.
  6. For other precautions during use, refer to the General Precautions for shock sensor.


Note : For other detailed specifications, refer to the specification sheet of the corresponding model.

*After you have put an item in your shopping cart, choose either [Quote] or [Order].
*For customized products or specifications, contact us using "Inquiry."
*Choose the currency from JPY, USD, or EUR.

Model Name Output configuration Detection sensitivity Standard Price Inventory Type Select
GIS-15 Normally open 1 G
1,310 JPY
13 USD
12 EUR
WIP
GIS-1H5 Normally open 1.5 G
1,310 JPY
13 USD
12 EUR
WIP
GIS-25 Normally open 2 G
1,310 JPY
13 USD
12 EUR
WIP
GIS-35 Normally open 3 G
1,310 JPY
13 USD
12 EUR
WIP
GIS-55 Normally open 5 G
1,310 JPY
13 USD
12 EUR
WIP
GIS-75 Normally open 7 G
1,310 JPY
13 USD
12 EUR
WIP
GIS-X35 Normally open 10 G
1,310 JPY
13 USD
12 EUR
WIP
GIS-205 Normally open 20 G
1,310 JPY
13 USD
12 EUR
WIP
GIS-115 Normally closed 1 G
1,310 JPY
13 USD
12 EUR
WIP
GIS-1H15 Normally closed 1.5 G
1,310 JPY
13 USD
12 EUR
WIP
GIS-215 Normally closed 2 G
1,310 JPY
13 USD
12 EUR
WIP
GIS-315 Normally closed 3 G
1,310 JPY
13 USD
12 EUR
WIP
GIS-515 Normally closed 5 G
1,310 JPY
13 USD
12 EUR
WIP
GIS-715 Normally closed 7 G
1,310 JPY
13 USD
12 EUR
WIP
GIS-X315 Normally closed 10 G
1,310 JPY
13 USD
12 EUR
WIP
GIS-2015 Normally closed 20 G
1,310 JPY
13 USD
12 EUR
WIP

STD Shipping is available immediately (on the day of order)

WIP Shipping is available within 1 to 3 weeks

BTO Shipping is available within 4 to 10 weeks

NOTE: The above information shows the typical delivery time. For actual delivery time, please confirm us as it depends on our business days and/or product quantities.

In the case of the quote request and order, please be sure to check the Terms and Conditions.
If you have made the procedure of quote request and order, it assumes that agree to the Terms and Conditions.

Quantity:
pieces
  • 125 JPY
    2 USD
    2 EUR

To confirm the Request a quote / Order Cart

Go to page top