• センサ、タッチセンサの日本語ページ
  • sensor,touch sensor English site
How It Works Shipping Fee Terms of Use

Model GID Shock (Acceleration) Sensor, Power Voltage 5 V DC

Application

  • Vibration monitoring of electrical appliances
  • Vibration monitoring of gaming devices
  • Security of equipment/machines
  • Building security

Features

  • The sensor can detect the impact and acceleration of 1 kHz or less almost flat.
  • A locking connector securely prevents disconnection of connectors caused by wire runs or vibration. A clear click touch when fitted together ensures complete insertion.
  • There are two output types: normally open, and normally closed, which can detect leadwire disconnection.
  • Momentary shocks of 200 ms or more can be detected.
  • A different detection sensitivity other than that for the standard model is also available. Feel free to contact us.

International Standards

  • Our products do not have overseas safety regulations such as CE mark, UL standard, EN standard etc.
  • Products is compliant to the RoHS directive.

* Please consult about "change of specification" and "request of specification" of the product.

Rating/Performance/Frequency Characteristics

Rating/Performance

Model GID-*5 GID-*15
Power Voltage 5 V DC ±5%(absolute maximum rating:30 V DC *1)
Power Consumption 6 mA DC or less
Output N-channel MOSFET Open drain NPN bipolar transistor, Open collector
30 V DC, 50 mA DC or less, (Output is available 700 ms from power ON)
Output-Residual Voltage 1 V DC or less (Load current 50 mA DC)
Operation Status Normally open
(Output ON when shock is detected)
Normally closed
(Output OFF when shock is detected)
Output Hold Time
Omentary Shock Input ON for at least 200 ms
(When input time is 3 ms or more)
ON for 200 ms or less
(When input time is less than 3 ms)
OFF for at least 200 ms
(When input time is 3 ms or more)
OFF for 200 ms or less
(When input time is less than 3 ms)
At Continuous
Shock Input
Continuous ON Continuous OFF
Detection Frequency 10 Hz to 1 kHz
Response Time 4 ms or less
Circuit Protection Back-flow protection diode and output surge absorption diode
Temperature Range -10 ºC to 60 ºC (At storage: -15 ºC to 65 ºC)
(Without dew condensation or freezing)
Humidity Range 85% RH or less (At storage: 85 % RH or less)
(Without dew condensation)
Breakdown Voltage 500 V AC, 50/60 Hz for 1 min (Between live parts and mountings)
Insulation Resistance 20 MΩ or more, At 500 V DC megger (and mountings) Between live parts
Vibration Resistance Durability: 10 to 55 Hz, Double amplitude: 1.5 mm in X-, Y-, and Z-direction, each 2 hours (Device not powered)
Shock Resistance Durability: 500 m/s² (Approx. 50 G) in X-, Y-, and Z-direction, each 3 times (Device not powered)
Ingress Protection Class IP50
Case Material Glass reinforced ABS resin
Connector Connector: SM03B-GHS(3-pin), Housing: GHR-03V-S, Contact: SSHL-002T-P0.2 (Manufactured by J.S.T Connector)
Weight Approx. 7 g
Options
(separately supplied)
Connector harness: CNH-GHR03S28-300

Detection Sensitivity

Model GID-A5 GID-B5 GID-C5 GID-D5 GID-E5 GID-F205
GID-A15 GID-B15 GID-C15 GID-D15 GID-E15 GID-F2015
Detection Sensitivity 1G±20 %
(at 500Hz)
3G±20%
(at 500Hz)
5G±20%
(at 500Hz)
7G±20%
(at 500Hz)
10G±20%
(at 500Hz)
20G±20%
(at 500Hz)

Reference Frequency Characteristics (Typical E)

GID-A5_RFC.gif

Dimensions/Output Circuit

Dimensions

ST-GID-A_EN-2.png

Connector harness(separately supplied)

CNH-GHR03S28-300.gif

Output Circuit

GID-15_OC.gif

Precautions during use

  • Tighten the case with a torque of 0.5 N.m or less.
  • The normally closed output type takes 300 ms maximum from power ON to output turning-ON.
  • Thermal shock applied to the sensor during an abrupt temperature change can change the detection sensitivity. Ensure proper handling of the sensor.
  • Avoid subjecting the sensor wire harness to mechanical stress while connecting to the connector or allowing vibration to transferred from impact, otherwise disconnection or malfunction may result. Support the harness lead-out so that it is not subjected to excessive stress or vibration.
  • Because there is no reverse connection protection diode built-in, pay careful attention to the polarity of the power supply.
  • For other precautions during use, refer to the General Precautions for shock sensor.

Note : For other detailed specifications, refer to the specification sheet of the corresponding model.

*After you have put an item in your shopping cart, choose either [Quote] or [Order].
*For customized products or specifications, contact us using "Inquiry."
*Choose the currency from JPY, USD, or EUR.

Model Name Output configuration Detection sensitivity Standard Price Inventory Type Select
GID-A5 Normally open 1 G
1,430 JPY
14 USD
12 EUR
STD
GID-B5 Normally open 3 G
1,430 JPY
14 USD
12 EUR
BTO
GID-C5 Normally open 5 G
1,430 JPY
14 USD
12 EUR
BTO
GID-D5 Normally open 7 G
1,430 JPY
14 USD
12 EUR
BTO
GID-E5 Normally open 10 G
1,430 JPY
14 USD
12 EUR
BTO
GID-F205 Normally open 20 G
1,430 JPY
14 USD
12 EUR
STD
GID-A15 Normally closed 1 G
1,430 JPY
14 USD
12 EUR
STD
GID-B15 Normally closed 3 G
1,430 JPY
14 USD
12 EUR
STD
GID-C15 Normally closed 5 G
1,430 JPY
14 USD
12 EUR
BTO
GID-D15 Normally closed 7 G
1,430 JPY
14 USD
12 EUR
BTO
GID-E15 Normally closed 10 G
1,430 JPY
14 USD
12 EUR
BTO
GID-F2015 Normally closed 20 G
1,430 JPY
14 USD
12 EUR
BTO

STD Shipping is available immediately (on the day of order)

WIP Shipping is available within 1 to 3 weeks

BTO Shipping is available within 4 to 10 weeks

NOTE: The above information shows the typical delivery time. For actual delivery time, please confirm us as it depends on our business days and/or product quantities.

In the case of the quote request and order, please be sure to check the Terms and Conditions.
If you have made the procedure of quote request and order, it assumes that agree to the Terms and Conditions.

Quantity:
pieces
  • 125 JPY
    2 USD
    2 EUR

To confirm the Request a quote / Order Cart

Go to page top