• センサ、タッチセンサの日本語ページ
  • sensor,touch sensor English site
How It Works Shipping Fee Terms of Use

Model GID Security Shock Sensor, Power Voltage 5 V DC

Application

  • Vibration monitoring of electrical appliances
  • Vibration monitoring of gaming devices
  • Security of equipment/machines
  • Building security

Features

  • Detects shocks due to impacts/collisions. Avoids possible malfunctions caused by machine-generated high-frequency oscillations by lowering the sensitivity to high frequency waves.
  • Will find use in crime prevention, such as monitoring shocks applied to glass windows or unauthorized operations such as bumping or knocking games machines.
  • A locking connector securely prevents disconnection of connectors caused by wire runs or vibration. A clear click touch when fitted together ensures complete insertion.
  • There are two output types: normally open, and normally closed, which can detect leadwire disconnection.
  • Momentary shocks of 200 ms or more can be detected.

International Standards

  • Our products do not have overseas safety regulations such as CE mark, UL standard, EN standard etc.
  • Products is compliant to the RoHS directive.

Rating/Performance/Frequency Characteristics

Rating/Performance

Model GID-15 GID-1H5 GID-25 GID-35 GID-55 GID-75 GID-X35 GID-205
GID-115 GID-1H15 GID-215 GID-315 GID-515 GID-715 GID-X315 GID-2015
Detection-
Sensitivity
30 Hz 1 G
±20%
1.5 G
±20%
2 G
±20%
3 G
±20%
5 G
±20%
7 G
±20%
10 G
±20%
20 G
±20%
100 Hz
Reference
2.2 G
±25%
3.4 G
±25%
4.5 G
±25%
7.0 G
±25%
12.2 G
±25%
16.8 G
±25%
21.9 G
±25%
70Hz
27.4 G
±25%
50Hz
Power Voltage 5V ± 5% DC (absolute maximum rating: 30 V DC *1)
Power Consumption 6 mA DC or less
Output
GID-*5 : N-channel MOSFET Open drain Normally open
GID-*15 : NPN bipolar transistor, Open collector, Normally closed
30 V DC, 50 mA DC or less, (Output is available 700 ms from power ON)
Output-Residual Voltage 1 V DC or less (Load current 50 mA DC)
Operation Status At single shock input:
ON/OFF for at least 200 ms (When input time is 3 ms or more)
ON/OFF for 200 ms or less (When input time is less than 3 ms)
At continuous shock input: Continuous ON/OFF
Detection Frequency 10 Hz to 1 kHz
Response Time 4 ms or less
Circuit Protection Output surge absorption diode
Temperature Range -10 ºC to 60 ºC (At storage: -15 ºC to 65 ºC) (No freezing or condensation)
Humidity Range 85% RH or less (At storage: 85 % RH or less) (No freezing or condensation)
Breakdown Voltage 500 V AC, 50/60 Hz for 1 min (Between live parts and mountings)
Insulation Resistance 20 MΩ or more, At 500 V DC megger (and mountings) Between live parts
Vibration Resistance Durability: 10 to 55 Hz, Double amplitude: 1.5 mm in X-, Y-, and Z-direction, each 2 hours (Device not powered)
Shock Resistance Durability: 500 m/s² (Approx. 50 G) in X-, Y-, and Z-direction, each 3 times (Device not powered)
Ingress Protection Class IP50
Case Material Glass reinforced ABS resin
Connector Connector: SM03B-GHS(3-pin), Housing: GHR-03V-S, Contact: SSHL-002T-P0.2 (Manufactured by J.S.T Connector)
Weight Approx. 7 g
Options
(separately supplied)
Connector harness: CNH-GHR03S28-300

Note : Please feel free to consult us regarding any different requirements you may have to those specified above, for detection sensitivity,power voltage, output retention time and response speed.

*1: It is a limit value with which the product is free from breakage. It does not guarantee the above-mentioned rating/performance.

Reference Frequency Characteristics (Typical)

GID-15_RFC.gif

Dimensions/Output Circuit

Dimensions

GID-1_Dimensions.gif

Connector harness(separately supplied)

CNH-GHR03S28-300.gif

Output Circuit

GID-15_OC.gif

Precautions during use

  1. Tighten the case with a torque of 0.5 N.m or less.
  2. The normal closed output type takes 300 ms maximum from power ON to output turn-ON.
  3. Thermal shock applied to the sensor during an abrupt temperature change can change the detection sensitivity.Ensure proper handling of the sensor.
  4. Avoid subjecting the sensor wire harness to mechanical stress while connecting to the connector or allowingvibration to transferred from impact, otherwise disconnection or malfunction may result. Support the harness lead-out so that it is not subjected to excessive stress or vibration.
  5. Because there is no reverse connection protection diode built-in, pay careful attention to the polarity of the power supply.
  6. For other precautions during use, refer to the General Precautions for shock sensor.

Note : For other detailed specifications, refer to the specification sheet of the corresponding model.

*After you have put an item in your shopping cart, choose either [Quote] or [Order].
*For customized products or specifications, contact us using "Inquiry."
*Choose the currency from JPY, USD, or EUR.

Model Name Output configuration Detection sensitivity Standard Price Inventory Type Select
GID-15 Normally open 1 G
1,430 JPY
14 USD
13 EUR
BTO
GID-1H5 Normally open 1.5 G
1,430 JPY
14 USD
13 EUR
BTO
GID-25 Normally open 2 G
1,430 JPY
14 USD
13 EUR
BTO
GID-35 Normally open 3 G
1,430 JPY
14 USD
13 EUR
BTO
GID-55 Normally open 5 G
1,430 JPY
14 USD
13 EUR
BTO
GID-75 Normally open 7 G
1,430 JPY
14 USD
13 EUR
BTO
GID-X35 Normally open 10 G
1,430 JPY
14 USD
13 EUR
BTO
GID-205 Normally open 20 G
1,430 JPY
14 USD
13 EUR
BTO
GID-115 Normally closed 1 G
1,430 JPY
14 USD
13 EUR
BTO
GID-1H15 Normally closed 1.5 G
1,430 JPY
14 USD
13 EUR
BTO
GID-215 Normally closed 2 G
1,430 JPY
14 USD
13 EUR
BTO
GID-315 Normally closed 3 G
1,430 JPY
14 USD
13 EUR
BTO
GID-515 Normally closed 5 G
1,430 JPY
14 USD
13 EUR
BTO
GID-715 Normally closed 7 G
1,430 JPY
14 USD
13 EUR
BTO
GID-X315 Normally closed 10 G
1,430 JPY
14 USD
13 EUR
BTO
GID-2015 Normally closed 20 G
1,430 JPY
14 USD
13 EUR
BTO

STD Shipping is available immediately (on the day of order)

WIP Shipping is available within 1 to 3 weeks

BTO Shipping is available within 4 to 10 weeks

NOTE: The above information shows the typical delivery time. For actual delivery time, please confirm us as it depends on our business days and/or product quantities.

In the case of the quote request and order, please be sure to check the Terms and Conditions.
If you have made the procedure of quote request and order, it assumes that agree to the Terms and Conditions.

Quantity:
pieces
  • 125 JPY
    2 USD
    2 EUR

To confirm the Request a quote / Order Cart

Go to page top