How It Works Shipping Fee Terms of Use

Model MDP-C10 Cylindrical Inductive Sensor

Application

  • Magnetic metal detection
  • Positioning of the processing machines
  • Position detection of the the metal pallets and moving table

Features

  • Shaped as a screw for easy mounting and position adjustment.
  • Safely available even in the place where water may splash thanks to its molded type.
  • Cylindrical inductive sensor of M30 screw.

International Standards

  • Our products do not have overseas safety regulations such as CE mark, UL standard, EN standard etc.
  • Products is compliant to the RoHS directive.

* Please consult about "change of specification" and "request of specification" of the product.

Rating/Performance/Characteristics Graph

Rating / Performance

Model MDP-C10 MDP-C101
Detection Surface Front side detection
Detection Distance 10.0 mm ± 10 %
Hysteresis 10 % or less of the detection distance
Set Distance 0 to 8.0 mm
Standard Detection
Target
Iron sheet of 30 × 30 mm and 1 mm in thickness
Power Supply Voltage 12 V to 24 V DC (Operating voltage range : 10 V to 30 V DC)
Current Consumption 10 mA DC or less
Output NPN transistor open collector 30 V DC, 100 mA DC or less
Output Residual Voltage 1 V DC or less (Load current 100 mA DC and a 1-meter cord)
Operation Status Normally open (ON output when detecting) Normally closed (OFF output when detecting)
Operation Indicator Red LED (Lit when the output is ON)
Response Frequency 400 Hz or more
Temperature Range -25 to 70 °C (-25 to 80 °C storage temperature range) (Without dew condensation or icing)
Humidity Range 35 to 95 % RH (35 to 95 % RH storage humidity range) (Without dew condensation)
Dielectric Strength 1000 V AC for 1 minute (Between the live part and case)
Insulation Resistance 50 MΩ or more at 500 V DC megger (Between the live part and case)
Vibration Resistance 10 to 55 Hz, 1.5 mm double amplitude in X, Y and Z directions for 2 hours each (at power off)
Shock Resistance 1000 m/s² (Approx. 100 G) in X, Y and Z directions 10 times each (at power off)
Protection IP67
Case Material Case : Brass nickel coating, Detection surface : PBT, Connected part : Polyarylate
Cable
ø6, 3-core round cord of 0.5 mm² and insulation 1.9 mm and 1 m in length (Oil and heat resistant vinyl)
* Can change to ø4, 3-core round cord of 0.3 mm²
Weight Approx. 165 g (Including accessories)
Accessories 2 hex nuts (Brass nickel coating), 1 toothed washer

*For a detailed specification of the other, please refer to specifications.

Characteristics Graph (Typical Example)

ST-MDP-C10_EN_02_03.jpg

Outline Dimensions/Output Circuit

Outline Dimensions

ST-MDP-C10_EN_03.jpg

Output Circuit

ST-MDP-C10_EN_07.jpg

Precautions During Use

Influence of Surrounding Metal

If there are metal objects around the inductive sensor, leave at least the space indicated in the figure below between them and the sensor.

MDP-C10_ST200714B_EN修正-2.jpg

Mutual Interference

If you use a number of the same product, separate them at least by the distances shown in the figure below to prevent reciprocal interference.

MDP-C10_ST200714B_JP修正-2_07.jpg

 Mounting

Always use plain washers to tighten the case and use a torque of 180 N·m or less.

Other

See inductive sensor general Precautions During Use for other precautions.

*After you have put an item in your shopping cart, choose either [Quote] or [Order].
*For customized products or specifications, contact us using "Inquiry."
*Choose the currency from JPY, USD, or EUR.

Model Name Output configuration Standard Price Inventory Type Select
MDP-C10 Normally open
44 USD
41 EUR
WIP
MDP-C101 Normally closed
44 USD
41 EUR
WIP

STD Shipping is available immediately (on the day of order)

WIP Shipping is available within 1 to 3 weeks

BTO Shipping is available within 10 to 18 weeks

NOTE: The above information shows the typical delivery time. For actual delivery time, please confirm us as it depends on our business days and/or product quantities.

In the case of the quote request and order, please be sure to check the Terms and Conditions.
If you have made the procedure of quote request and order, it assumes that agree to the Terms and Conditions.

Part number index

Product Comparison Table

confirmation of the estimate request content

Proximity sensor

Go to page top