Model MDP-C5 Cylindrical Proximity Sensor
- Product catalog download
- 3D PDF Download
- MDP-C5 Download the CAD data (DXF / Parasolid / STEP / IGES)
Application
- Magnetic metal detection
- Positioning of the processing machines
- Position detection of the moving table and metal pallets
Features
- Shaped as a screw for easy installation and position adjustment.
- Molded type that can be used safely even in places where water may splash.
- Cylindrical proximity sensor of M18 screw.
International Standards
- Our products do not have overseas safety regulations such as CE mark, UL standard, EN standard etc.
- Products is compliant to the RoHS directive.
* Please consult about "change of specification" and "request of specification" of the product.
Rating/Performance/Characteristics Graph
Rating / Performance
| Model | MDP-C5 | MDP-C51 |
|---|---|---|
| Detection Surface | Front side detection | |
| Detection Distance | 5 mm | |
| Hysteresis | 10 % or less of the detection distance | |
| Set Distance | 0 to 4.0 mm | |
| Standard Detection Target |
Iron plate of 18 × 18 mm and 1 mm in thickness | |
| Power Supply Voltage | 12 V to 24 V DC (Operating voltage range: 10 V to 30 V DC) | |
| Power Consumption | 10 mA DC or less | |
| Output | 30 V DC 100 mA DC or less NPN transistor open collector | |
| Output Residual Voltage | 1 V DC or less (When load current is 100 mA DC and a 1-meter cord) | |
| Operation Configuration | Normally open (On output with detection target) |
Normally closed (Off output with detection target) |
| Operation Display | Red LED (Lit when On output) | |
| Response Frequency | 1 kHz or more | |
| Operating Temperature Range |
-25 to 70 °C (-25 to 80 °C during storage) (Without dew condensation or freezing) |
|
| Operating Humidity Range |
35 to 95% RH (35 to 95% RH during storage)(Without dew condensation) | |
| Withstand Voltage | 1 min at 1000 V AC 50/60 Hz (Between the live part and case) | |
| Insulation Resistance | 50 MΩ or more measured with an ohmmeter at 500 V DC (Between the live part and case) |
|
| Vibration Resistance | Durability: 2 hours in each X, Y, Z direction at 10 to 55 Hz and with peak-to-peak amplitude of 1.5 mm (At power off) | |
| Shock Resistance | Durability: 10 times at 1000 m/s² (approx. 100 G) in each X, Y, Z direction (At power off) |
|
| Protection Rating | IP67 | |
| Case Material | Case: Brass nickel coating, Detection surface: PBT, Connected part: Polyarylate | |
| Cable | ø6, 3-core round cord of 0.5 mm² and 1 m in length (Oil and heat resistant) |
|
| Weight | Approx. 100 g | |
| Accessories | 2 hex nuts (brass nickel coating), 1 toothed washer | |
*For a detailed specification of the other, please refer to specifications.
Characteristics Graph (Typical Example)
External Dimensions Diagram/Output Circuit
External Dimensions Diagram
Output Circuit
Usage Precautions
Influence of Surrounding Metal
If there are metal objects around the proximity sensor, leave at least the space indicated in the figure below between them and the sensor.
Mutual Interference
If you use two or more of the same product, separate them at least by the distances shown in the figure below to prevent reciprocal interference.
Installation
Always use plain washers to tighten the case and use a torque of 70 N.m or less.
Other
See proximity sensor general usage precautions for other precautions.
*After you have put an item in your shopping cart, choose either [Quote] or [Order].
*For customized products or specifications, contact us using "Inquiry."
*Choose the currency from JPY, USD, or EUR.
| Model Name | Output configuration | Standard Price | Inventory Type | Select |
|---|---|---|---|---|
| MDP-C5 | Normally open |
4,080 JPY
38 USD
32 EUR
|
BTO | |
| MDP-C51 | Normally closed |
4,080 JPY
38 USD
32 EUR
|
STD |
STD Shipping is available immediately (on the day of order)
WIP Shipping is available within 1 to 3 weeks
BTO Shipping is available within 4 to 10 weeks
NOTE: The above information shows the typical delivery time. For actual delivery time, please confirm us as it depends on our business days and/or product quantities.
In the case of the quote request and order, please be sure to check the Terms and Conditions.
If you have made the procedure of quote request and order, it assumes that agree to the Terms and Conditions.
