Model DWS/DWM Door Monitoring Sensor
- Product catalog download
- 3D PDF Download
- DWS Download the CAD data (DXF / Parasolid / STEP / IGES)
Application
- By detecting the opening and closing of the door, such as a food factory to prevent fraud and theft.
-
Open and close monitoring of the entrance door, such as drawers and safe.
- Opening and closing and fault monitoring of the automatic door.
- Monitoring of rack door open/close in the data center
- Monitoring of door open/close on the slot machine
Features
- Small type for an easy installation even in shallow and narrow places.
- Molded type that can be used safely even in places where water may splash.
- In order to avoid malfunction in the commercially available magnet, it is equipped with many sensors.
International Standards
- Our products do not have overseas safety regulations such as CE mark, UL standard, EN standard etc.
- Products is compliant to the RoHS directive.
* Please consult about "change of specification" and "request of specification" of the product.
Rating/Performance
Rating / Performance
| Model | DWS-1 | DWS-2 |
|---|---|---|
| Detection Surface | Front side detection | |
| Detection Distance | 3.5 mm or more | |
| Set Distance | 0 to 3 mm | |
| Standard Detection Target |
DWM-1 | DWM-2 |
| Power Supply Voltage | 12 V to 24 V DC (Operating voltage range : 10 V to 30 V DC) | |
| Power Consumption | 10 mA DC or less | |
| Output | Nch MOSFET open drain 30 V DC 50 mA DC or less | |
| Output Residual Voltage | 1 V DC or less (Load current 50 mA DC) | |
| Operation Configuration | Normally open, on output with specified magnetic code (Standard detection target) |
|
| Response Time | 200 ms or less | |
| Operating Temperature Range |
-10 to 60 °C (-20 to 70 °C during storage) (Without dew condensation or freezing) |
|
| Operating Humidity Range |
95% RH or less (95% RH or less during storage)(Without dew condensation) | |
| Withstand Voltage | 1 min at 1000 V AC (Between the live part and installation part) | |
| Insulation Resistance | 100 MΩ or more measured with an ohmmeter at 500 V DC (Between the live part and installation part) |
|
| Vibration Resistance | Durability : 2 hours in each X, Y, Z direction at 10 to 55 Hz and with peak-to-peak amplitude of 1.5 mm (At power off) | |
| Shock Resistance | Durability : 3 times at 500 m/s² in each X, Y, Z direction (At power off) | |
| Protection Rating | IP67 | |
| Case Material | ABS | |
| Cable | ø3, 3-core round cord of 0.3 mm² and 1 m in length (Oil and heat resistant) | |
| Weight | Approx. 24 g (DWM : Approx. 9 g) | |
External Dimensions Diagram / Output Circuit
External Dimensions Diagram
Output Circuit
Usage Precautions
-
Always use a standard detector DWM-1 in the DWS-1, using the standard detector DWM-2 in the DWS-2.It does not operate a combination of DWM-1 to DWM-2 and DWS-2 to DWS-1.Please attach so as to be parallel to the DWS and DWM at the time of detection.
-
In 0.59N · m (6kgf · cm) or less of torque, installed in two of the M3 screw.
-
See Electromagnetic sensor general usage precautions for other precautions.
Quote / Order
Quote / Order
Please contact our sales.
