Model MDS-HF5U High-voltage Rated Inductive Sensor
- Product catalog download
- 3D PDF Download
- MDS-HF5U Download the CAD data (DXF / Parasolid / STEP / IGES)
Application
- Positioning of the processing machines
- Position detection of the moving table and metal pallets
- As it can be used to drive voltage 48 V DC (or less) following electric forklift, refrigeration car, freezer car, etc
Features
- Easy mounting: square and can be installed directly on metal surfaces.
- It can be used in a wide range of supply voltage 15 V to 65 V DC.
- Molded type that can be used safely even in places where water may splash.
- Small flat inductive sensor with a detection surface of 18 mm and a detection distance of 5 mm (Upper surface detection type).
- Because of the high power supply voltage specification, it can also be used in the battery voltage 48 V DC.
International Standards
- Our products do not have overseas safety regulations such as CE mark, UL standard, EN standard etc.
- Products is compliant to the RoHS directive.
* Please consult about "change of specification" and "request of specification" of the product.
Rating/Performance / Characteristics Graph
Rating / Performance
| Model | MDS-HF5U | MDS-HF5U1 |
|---|---|---|
| Detection Surface | Upper side detection | |
| Detection Distance | 5 mm ±10% | |
| Hysteresis | 20% or less of the detection distance | |
| Set Distance | 0 to 4.0 mm | |
| Standard Detection Target | Iron sheet of 18 × 18 mm and 1 mm in thickness | |
| Power Supply Voltage | 24 V to 48 V DC (Operating voltage range: 15 V to 65 V DC) | |
| Current consumption | 10 mA DC or less | |
| Output | 65 V DC 200 mA DC or less Nch MOSFET open drain | |
| Output Residual Voltage | 0.5 V DC or less (When load current is 200 mA DC and a 1-meter cord) | |
| Operation Status | Normally open (ON output when detecting) |
Normally closed (OFF output when detecting) |
| Operation Indicator | Red LED (Lit when the output is ON) | |
| Response Frequency | 500 Hz or more | |
| Temperature range | -25 to 70 °C (-25 to 70 °C storage temperature range)(Without dew condensation or icing) | |
| Humidity range | 35 to 95% RH (35 to 95% RH storage humidity range)(Without dew condensation) | |
| Dielectric strength | 1000 V AC for 1minute (Between the live part and case) | |
| Insulation Resistance | 50 MΩ or more at 500 V DC megger (Between the live part and case) | |
| Vibration Resistance | 10 to 55 Hz, 1.5 mm double amplitude in X, Y and Z directions for 2 hours each (at power off) | |
| Shock Resistance | 500 m/s² (Approx. 50 G) in X, Y and Z directions 3 times each (at power off) | |
| Protection | IP67 | |
| Case Material | Polyarylate | |
| Cable | ø3, 3-core round cord of 0.3 mm2 and insulation 1.01 mm and 1 m in length (Oil and heat resistant vinyl) | |
| Weight | Approx. 20 g | |
*For a detailed specification of the other, please refer to specifications.
Characteristics Graph (Typical Example)
Outline Dimensions / Output Circuit
Outline Dimensions
Output Circuit
Precautions During Use
Influence of Surrounding Metal
If there are metal objects around the inductive sensor, leave at least the space indicated in the figure below between them and the sensor.
Mutual Interference
If you use a number of the same product, separate them at least by the distances shown in the figure below to prevent reciprocal interference. (Sensors with a different frequency are indicated with a B after the model name.)
Mounting
Always use plain washers to tighten the case and use a torque of 0.5 N·m or less.
Other
See inductive sensor general Precautions During Use for other precautions.
*After you have put an item in your shopping cart, choose either [Quote] or [Order].
*For customized products or specifications, contact us using "Inquiry."
*Choose the currency from JPY, USD, or EUR.
| Model Name | Output configuration | Frequency | Standard Price | Inventory Type | Select |
|---|---|---|---|---|---|
| MDS-HF5U | Normally open | Normal type |
22 USD
20 EUR
|
STD | |
| MDS-HF5UB | Normally open | Different frequency type |
22 USD
20 EUR
|
BTO | |
| MDS-HF5U1 | Normally closed | Normal type |
22 USD
20 EUR
|
STD | |
| MDS-HF5U1B | Normally closed | Different frequency type |
22 USD
20 EUR
|
BTO |
STD Shipping is available immediately (on the day of order)
WIP Shipping is available within 1 to 3 weeks
BTO Shipping is available within 10 to 18 weeks
NOTE: The above information shows the typical delivery time. For actual delivery time, please confirm us as it depends on our business days and/or product quantities.
In the case of the quote request and order, please be sure to check the Terms and Conditions.
If you have made the procedure of quote request and order, it assumes that agree to the Terms and Conditions.
