Model MDS-G4-S High Speed Response Groove(U) Type Inductive Sensor
- Product catalog download
- 3D PDF Download
- MDS-G4-S Download the CAD data (DXF / Parasolid / STEP / IGES)
Application
- Detection of coins for ATM and vending machines
- Detection of tokens of amusement equipment
- Rotational speed detection using a metal sheet gear
Features
- Detects the passage of all types of metals, tokens and coins.
- Perfect to detect the number of rotations of metal sheet slitters or gears.
- Supports high-speed detection.
International Standards
- Our products do not have overseas safety regulations such as CE mark, UL standard, EN standard etc.
- Products is compliant to the RoHS directive.
* Please consult about "change of specification" and "request of specification" of the product.
Rating/Performance/Output Waveform
Rating / Performance
| Model | MDS-G4-S | MDS-G4-S1 | |||||
|---|---|---|---|---|---|---|---|
| Detection Groove Width | 4 mm | ||||||
| Standard Detection Target | Iron sheet of ø 42, 15 P / R, aluminum sheet thickness 1.5 mm, the slit width 2.5 mm | ||||||
| Hysteresis | 0.3 mm or more | ||||||
| Power Supply Voltage | 6.0 V to 26.4 V DC, ripple 1 % P-P | ||||||
| Output |
NPN transistor (Between Output and GND(0V), output characteristics when load resistance 10 kΩ is connectedare refer to the following table)
|
||||||
| Operation Status | Normally open (ON output when detecting) |
Normally closed (OFF output when detecting) |
|||||
| Response Frequency | 0 to 3 kHz (At -20 °C 1kHz Max.) | ||||||
| Temperature Range | -10 to 80 °C (-20 to 85 °C storage temperature range) (Without dew condensation or icing) | ||||||
| Humidity Range | 93 % RH or less (At a temperature of 65 °C) (Without dew condensation) | ||||||
| Dielectric Strength | 1000 V AC for 1 minute (Between the live part and case) | ||||||
| Insulation Resistance | 100 MΩ or more at 500 V DC megger (Between the live part and case) | ||||||
| Vibration Resistance | 10 to 55 Hz, 1.5 mm double amplitude in X, Y and Z directions for 2 hours each (at power off) | ||||||
| Shock Resistance | 500 m/s² (Approx. 50 G) in X, Y and Z directions 10 times each (at power off) | ||||||
| Protection | IP55 | ||||||
| Case Material | Case : ABS resin with glass-fiber, Cover : SUS304 | ||||||
| Cable | ø5, 3-core round cord of 0.3 mm² and insulation 1.5 mm and 0.2 m in length (Oil and heat resistant vinyl) | ||||||
| Weight | Approx. 40 g | ||||||
Output Characteristic
| Model | MDS-G4-S | ||
|---|---|---|---|
| Operating Power Voltage |
At 6 V DC(Vcc)
|
At 12 V DC (Vcc)
|
At 24 V DC (Vcc)
|
| During Non-shielding | 3.8 V DC or more (VOH) | 8.0 V DC or more (VOH) | 17.0 V DC or more (VOH) |
| During Shielding | 0.5 V DC or less (VOL) | 0.5 V DC or less (VOL) | 0.5 V DC or less (VOL) |
| Current Consumption | 13 mA Max. | 17 mA Max. | 23 mA Max. |
| Output Impedance | 2.4 kΩ ±5% | ||
| Output Rise Time | 3 μs or less | ||
| Output Fall Time | 3 μs or less | ||
| Model | MDS-G4-S1 | ||
|---|---|---|---|
| Operating Power Voltage | At 6 V DC(Vcc) | At 12 V DC (Vcc) | At 24 V DC (Vcc) |
| During Non-shielding | 0.5 V DC or less (VOH) | 0.5 V DC or less (VOH) | 0.5 V DC or less (VOH) |
| During Shielding | 3.8 V DC or more (VOL) | 8.0 V DC or more (VOL) | 17.0 V DC or more (VOL) |
| Current Consumption | 15 mA Max. | 20 mA Max. | 25 mA Max. |
| Output Impedance | 2.4 kΩ ±5% | ||
| Output Rise Time | 3 μs or less | ||
| Output Fall Time | 3 μs or less | ||
Output Waveform
Outline Dimensions/Output Circuit
Outline Dimensions
Output Circuit
Precautions During Use
Precautions During Use
- If you use a switching regulator to power, please ground always FG (frame ground) terminal.
- Always use plain washers to tighten the case and use a torque of 0.5 N·m or less.
-
Cable wiring color of the sensor is different from the other models.Please be wired as that has been described in the Dimensions.
- Cable length standard has become 0.2 m.
- See inductive sensor general Precautions During Use for other precautions.
Detection Distance Conditions
Detection Distance Conditions
The detection object (11 × 6 × t1.5 aluminum plate) is installed than the groove bottom surface of the case at the 1mm, and inserting the detected object in the case the center direction.
MDS-G4-S:
Returns the detected object from the point where output becomes Low,
Measure the distance between the point at which the output becomes High.
MDS-G4-S1:
Returns the detected object from the point where output becomes High,
Measure the distance between the point at which the output becomes Low.
*After you have put an item in your shopping cart, choose either [Quote] or [Order].
*For customized products or specifications, contact us using "Inquiry."
*Choose the currency from JPY, USD, or EUR.
| Model Name | Output configuration | Standard Price | Inventory Type | Select |
|---|---|---|---|---|
| MDS-G4-S | Normally open |
42 USD
39 EUR
|
STD | |
| MDS-G4-S1 | Normally closed |
42 USD
39 EUR
|
STD |
STD Shipping is available immediately (on the day of order)
WIP Shipping is available within 1 to 3 weeks
BTO Shipping is available within 10 to 18 weeks
NOTE: The above information shows the typical delivery time. For actual delivery time, please confirm us as it depends on our business days and/or product quantities.
In the case of the quote request and order, please be sure to check the Terms and Conditions.
If you have made the procedure of quote request and order, it assumes that agree to the Terms and Conditions.
