• センサ、タッチセンサの日本語ページ
  • sensor,touch sensor English site
How It Works Shipping Fee Terms of Use

Model MDS-HQ5 High-voltage rated proximity sensor

Application

  • Positioning of the processing machines
  • Position detection of the moving table and metal pallets
  • As it can be used to drive voltage DC 48 V (or less) following electric forklift, refrigeration car, freezer car, etc

Features

  • Easy installation: square and can be installed directly on metal surfaces.
  • It can be used in a wide range of supply voltage DC 15 V to 65 V.
  • Molded type that can be used safely even in places where water may splash.
  • Small proximity sensor with a detection surface of 17 × 17 mm and a detection distance of 5 mm (front side detection type)
  • Because of the high power supply voltage specification, it can also be used in the battery voltage DC 48 V.

International Standards

  • Our products do not have overseas safety regulations such as CE mark, UL standard, EN standard etc.
  • Products is compliant to the RoHS directive.

Rating and performance / Characteristics graph

Rating and performance

Model name MDS-HQ5 MDS-HQ51
Detection surface Front side detection
Detection distance 5 mm ±10 %
Hysteresis 20% or less of the detection distance
Set distance 0 to 4.0 mm
Standard detection
target
Iron plate of 17 × 17 mm and 1 mm in thickness
Power supply voltage 24 V to 48 V DC (Operating voltage range: 15 V to 65 V DC)
Power consumption DC 10 mA or less
Output DC 65 V DC 200 mA or less Nch MOSFET open drain
Output residual voltage DC 0.5 V or less  (when load current is DC 200 mA and a 1-meter cord)
Operation configuration Normally open
(On output with detection target)
Normally closed
(Off output with detection target)
Operation display Red LED (lit when On output)
Response frequency 500 Hz or more
Operating temperature
range
-25 to 70 °C (-25 to 70 °C during storage)
Operating humidity
range
35 to 95% RH (35 to 95% RH during storage)
Withstand voltage 1 min at AC 1000 V 50/60 Hz (between the live part and case)
Insulation resistance 50 MΩ or more measured with an ohmmeter at DC 500 V
(between the live part and case)
Vibration resistance Durability: 2 hours in each X, Y, Z direction at 10 to 55 Hz and with peak-to-peak amplitude of 1.5 mm (at power off)
Shock resistance Durability: 3 times at 500 m/s² (approx. 50 G) in each X, Y, Z direction
(at power off)
Protection rating IP67
Case material ABS
Cable ø4, 3-core round cord of 0.3 mm² and 1 m in length (oil and heat resistant)
Weight Approx. 30 g

*For a detailed specification of the other, please refer to specifications.

Characteristics graph (typical example)

MDS-HQ5_Characteristics_graph.gif

 

External dimensions diagram / Output circuit

External dimensions diagram

MDS-HQ5_External_dimensions_diagram.gif

Output circuit

MDS-HQ5_Output_circuit.gif

 

Usage precautions

Influence of surrounding metal

If there are metal objects around the proximity sensor, leave at least the space indicated in the figure below between them and the sensor.

 
MDS-HQ5_Influence_of_surrounding_metal.gif

Mutual interference

If you use two or more of the same product, separate them at least by the distances shown in the figure below to prevent reciprocal interference.
(Sensors with a different frequency are indicated with a B after the model name.)
 
MDS-HQ5_Mutual_interference.gif

Installation

Tighten the case with a torque of 0.59 N·cm (6 kgf·cm) or less.

Other

See proximity sensor general usage precautions for other precautions.

 

*After you have put an item in your shopping cart, choose either [Quote] or [Order].
*For customized products or specifications, contact us using "Inquiry."
*Choose the currency from JPY, USD, or EUR.

Model Name Output configuration Frequency Standard Price Inventory Type Select
MDS-HQ5 Normally open Normal type
3,550 JPY
33 USD
31 EUR
BTO
MDS-HQ5B Normally open Different frequency type
3,550 JPY
33 USD
31 EUR
BTO
MDS-HQ51 Normally closed Normal type
3,550 JPY
33 USD
31 EUR
BTO
MDS-HQ51B Normally closed Different frequency type
3,550 JPY
33 USD
31 EUR
BTO

STD Shipping is available immediately (on the day of order)

WIP Shipping is available within 1 to 3 weeks

BTO Shipping is available within 4 to 10 weeks

NOTE: The above information shows the typical delivery time. For actual delivery time, please confirm us as it depends on our business days and/or product quantities.

In the case of the quote request and order, please be sure to check the Terms and Conditions.
If you have made the procedure of quote request and order, it assumes that agree to the Terms and Conditions.

Go to page top