• センサ、タッチセンサの日本語ページ
  • sensor,touch sensor English site
How It Works Shipping Fee Terms of Use

Model MG100-1R5-P30B Address sensor magnet tape

Features

  • A film has been applied to the front surface to protect the rubber magnet.
  • The magnet does not need to be embedded since double-sided tape is attached to the back side.
  • Please use in combination always a magnetic sensor address for transfer machine.

                  - 4-bit : MGG-430-N301
                  - 6-bit : MGG-630-N301
                  - 8-bit : MGG-830-N301

  • Fill in the address No. in the remarks column of the quote page on the occasion of quote.

International Standards

  • Our products do not have overseas safety regulations such as CE mark, UL standard, EN standard etc.
  • Products is compliant to the RoHS directive.

* Please consult about "change of specification" and "request of specification" of the product.

Rating and performance/External dimensions diagram

Rating and performance

Model name MG100-1R5-P30B4 MG100-1R5-P30B6 MG100-1R5-P30B8
Number of bit 4-bit 6-bit 8-bit
Laminated film Front surface: Vinyl chloride color laminated film (Yellow), back surface: double-sided tape
Magnet Anisotropic rubber magnet (ferrite magnet + Chlorinated polyethylene)
Magnet characteristics Residual magnetic flux density (Br) 228 mT, Coercivity (bHC) 167 kA/m or more
Operating temperature
range
-10 to 70 °C
Length (part of A) 180 mm 240 mm 300 mm
Pitch of address 30 mm

 

External dimensions diagram

mg100-外形寸法図.gif

Usage precautions

  1. Distance between the magnetic address sensor and a magnetic address plates please use in 12 to 28 mm.
    When the installation distance of the sensor is too far can not correct detection detects the return magnetic flux
    emanating from it is too near the magnetic address plate, it will not be able to detect the correct address.
     
  2. Also, please use as the magnetic address sensor passes near the center of the width direction of the magnetic address plate.
    Magnetic address slope those who address № is displayed is the LSB.
    Please use the LSB of the magnetic address sensor is to fit in the direction of the LSB of the magnetic address plate.
    It will find the correct address regardless of the passing direction of the AGV.
  3. When the magnetic address plate is adjacent, it may cause a malfunction by detecting the magnetic poles of adjacent magnetic address.
    Magnetic address plate, please use at an interval of more than 350 mm.
  4. Note that if a strong magnetic field, such as those emitted by neodymium magnets, approaches the magnet, the magnetic field lines will change according to the magnetization or demagnetization.
  5. Do not use the magnets in an atmosphere where they are directly subject to organic solvents, chemicals, or corrosive gases since they are made of rubber.
  6. Thanks to the double-sided tape on the back side of the magnet, you just need to remove the release paper and stick the magnet to install it.

*After you have put an item in your shopping cart, choose either [Quote] or [Order].
*For customized products or specifications, contact us using "Inquiry."
*Choose the currency from JPY, USD, or EUR.

Model Name bit Standard Price Inventory Type Select
MG100-1R5-P30B8 8-bit
2,550 JPY
24 USD
22 EUR
STD
MG100-1R5-P30B6 6-bit
2,250 JPY
21 USD
19 EUR
STD
MG100-1R5-P30B4 4-bit
1,950 JPY
19 USD
17 EUR
STD

STD Shipping is available immediately (on the day of order)

WIP Shipping is available within 1 to 3 weeks

BTO Shipping is available within 4 to 10 weeks

NOTE: The above information shows the typical delivery time. For actual delivery time, please confirm us as it depends on our business days and/or product quantities.

In the case of the quote request and order, please be sure to check the Terms and Conditions.
If you have made the procedure of quote request and order, it assumes that agree to the Terms and Conditions.

Go to page top