Model MSS-SDI Small Electromagnetic Sensor
- Product catalog download
- 3D PDF Download
- MSS-SDI Download the CAD data (DXF / Parasolid / STEP / IGES)
Application
- Cylinder position detection and control
- Relay and programmable controller control
- Magnet detection
Features
- Because use a reed switch method, leakage current is 0 μA.
- Welding prevention resistor built-in.
- Cable connection available on the side or on the top.
- Cable of 1 m and 3 m and 5 m length,are available.
- Molded type that can be used safely even in places where water may splash.
International Standards
- Our products do not have overseas safety regulations such as CE mark, UL standard, EN standard etc.
- Products is compliant to the RoHS directive.
* Please consult about "change of specification" and "request of specification" of the product.
Rating/Performance/Characteristics Graph
Rating / Performance
| Model | MSS-SDI | |||
|---|---|---|---|---|
| Detection Surface | Front side detection | |||
| Detection Sensitivity | Detection : 6.5 mT (60 G) or more (At the standard point) Reset : 1.5 mT (15 G) or less (At the standard point) |
|||
| Detection Polarity | N pole and S pole | |||
| Power Supply Voltage | 12 V to 24 V DC (Operating voltage range : 10 V to 30 V DC) | |||
| Leakage Current | 0 μ A DC when Off | |||
| Power Consumption | 5 mA to 50 mA DC | |||
| Output Residual Voltage | 4 V DC or less (Load current 50 mA DC and a 1-meter cable) | |||
| Welding Prevention Resistance |
22 Ω | |||
| Operation Configuration | Normally open (On with magnetic field) | |||
| Operation Display | Red LED (Lit when On output) | |||
| Max Response Frequency | 200Hz | |||
| Operating Temperature Range |
-10 to 60 °C (-15 to 60 °C during storage) (Without dew condensation or freezing) |
|||
| Operating Humidity Range |
95% RH or less (95% RH or less during storage)(Without dew condensation) | |||
| Withstand Voltage | 1 min at 1000 V AC 50/60 Hz (Between the live part and case) | |||
| Insulation Resistance | 50 MΩ or more measured with an ohmmeter at 500 V DC (Between the live part and case) |
|||
| Vibration Resistance | Durability : 2 hours in each X, Y, Z direction at 10 to 55 Hz and with peak-to-peak amplitude of 1.5 mm (At power off) | |||
| Shock Resistance | Durability : 10 times at 294 m/s² (approx. 30 G) in each X, Y, Z direction (At power off) |
|||
| Protection Rating | IP67 | |||
| Case Material | PBT | |||
| Cable | ø3.1, 2-core round cord of 0.2 mm² (Oil and heat resistant) | |||
| Cable Direction | Horizontal | |||
| Weight | Approx. 15 g (1 m in cable length) | |||
Characteristics Graph (Typical Example)
External Dimensions Diagram/Output Circuit and Connections
External Dimensions Diagram
Output Circuit and Connections
Usage Precautions
Usage Precautions
- If the load of the magnetic sensor relay, the inductive load such as a solenoid, please use by using a surge protection circuit and varistor to load.
- Because it is a reed switch type, please use as not to apply excessive shock or stress to those magnetic sensor.
- If the load of the magnetic sensor is a large inrush current, such as capacity load, please use so as not to over the maximum load current value.
- See Electromagnetic sensor general usage precautions for other precautions.
*After you have put an item in your shopping cart, choose either [Quote] or [Order].
*For customized products or specifications, contact us using "Inquiry."
*Choose the currency from JPY, USD, or EUR.
| Model Name | Cable length | Standard Price | Inventory Type | Select |
|---|---|---|---|---|
| MSS-SDI | 1 m |
16 USD
15 EUR
|
STD | |
| MSS-SDI-3M | 3 m |
20 USD
18 EUR
|
BTO | |
| MSS-SDI-5M | 5 m |
24 USD
22 EUR
|
BTO |
STD Shipping is available immediately (on the day of order)
WIP Shipping is available within 1 to 3 weeks
BTO Shipping is available within 10 to 18 weeks
NOTE: The above information shows the typical delivery time. For actual delivery time, please confirm us as it depends on our business days and/or product quantities.
In the case of the quote request and order, please be sure to check the Terms and Conditions.
If you have made the procedure of quote request and order, it assumes that agree to the Terms and Conditions.
