• センサ、タッチセンサの日本語ページ
  • sensor,touch sensor English site
How It Works Shipping Fee Terms of Use

Model MSS-SDL Small electromagnetic sensor

Application

  • Cylinder position detection and control
  • Relay and programmable controller control
  • Magnet detection

Features

  • Because use a reed switch method, leakage current is 0μA.
  • Welding prevention resistor built-in.
  • Cable connection available on the side or on the top.
  • Cable of 1 m and 3 m and 5 m length,are available.
  • Molded type that can be used safely even in places where water may splash.

International Standards

  • Our products do not have overseas safety regulations such as CE mark, UL standard, EN standard etc.
  • Products is compliant to the RoHS directive.

* Please consult about "change of specification" and "request of specification" of the product.

Rating and performance / Characteristics graph

Rating and performance

Model name MSS-SDL
Detection surface Front side detection
Detection sensitivity Detection: 6.5 mT (60 G) or more (at the standard point), reset: 1.5 mT (15 G) or less (at the standard point) 
Detection polarity N pole and S pole
Power supply voltage 12 V to 24 V DC(Operating voltage range : 10 V to 30 V DC)
Leakage current DC 0 μ A when Off
Power consumption 5 mA to 50 mA DC
Output residual voltage DC 4 V or less(load current DC 50 mA and a 1-meter cable)
Welding prevention
resistance
22Ω
Operation configuration Normally open (On with magnetic field)
Operation display Red LED (lit when On output)
Max response frequency 200Hz
Operating temperature
range
-10 to 60 °C (-15 to 60 °C during storage)
(Without dew condensation or freezing)
Operating humidity
range
95% RH or less (95% RH or less during storage)
(Without dew condensation)
Withstand voltage 1 min at AC 1000 V 50/60 Hz (between the live part and case)
Insulation resistance 50 MΩ or more measured with an ohmmeter at DC 500 V
(between the live part and case)
Vibration resistance Durability: 2 hours in each X, Y, Z direction at 10 to 55 Hz and with peak-to-peak amplitude of 1.5 mm (at power off)
Shock resistance Durability: 10 times at 294 m/s² (approx. 30 G) in each X, Y, Z direction
(at power off)
Protection rating IP67
Case material PBT
Cable ø3.1, 2-core round cord of 0.2 mm² (oil and heat resistant)
Cable direction Vertical
Weight Approx. 15 g (1 m in cable length)

*For a detailed specification of the other, please refer to specifications.

Characteristics graph (typical example)

MSS-SDI_Characteristics_graph_(typical_example).gif

External dimensions diagram / Output circuit and connections

External dimensions diagram

MSS-SDL_en.gif

 

Output circuit and connections

MSS-SDI_Output_circuit_and_connections.gif

Usage precautions

  1. If the load of the magnetic sensor relay, the inductive load such as a solenoid, please use by using a surge protection circuit and varistor to load.
  2. Because it is a  reed switch type, please use as not to apply excessive shock or stress to those magnetic sensor.
  3. If the load of the magnetic sensor is a large inrush current, such as capacity load, please use so as not to over the maximum load current value.

MSS-SDI_Usage_precautions.gif

  1. See Electromagnetic sensor general usage precautions for other precautions.

 

*After you have put an item in your shopping cart, choose either [Quote] or [Order].
*For customized products or specifications, contact us using "Inquiry."
*Choose the currency from JPY, USD, or EUR.

Model Name Cable length Standard Price Inventory Type Select
MSS-SDL 1 m
1,670 JPY
16 USD
14 EUR
BTO
MSS-SDL-3M 3 m
2,000 JPY
19 USD
17 EUR
BTO
MSS-SDL-5M 5 m
2,440 JPY
23 USD
20 EUR
BTO

STD Shipping is available immediately (on the day of order)

WIP Shipping is available within 1 to 3 weeks

BTO Shipping is available within 4 to 10 weeks

NOTE: The above information shows the typical delivery time. For actual delivery time, please confirm us as it depends on our business days and/or product quantities.

In the case of the quote request and order, please be sure to check the Terms and Conditions.
If you have made the procedure of quote request and order, it assumes that agree to the Terms and Conditions.

Part number index

Product Comparison Table

confirmation of the estimate request content

Electromagnetic sensor

Go to page top