Model PRB-*S-12 Analog Photoelectric Sensor
- Product catalog download
- 3D PDF Download
- PRB-SS_MS Download the CAD data (DXF / Parasolid / STEP / IGES)
Application
- Human sensor of ATM
- Adjustment machine for human sensor
- Automatic door for human sensor
- Safety management platform
- The detection of deflection of the material
Features
- Uses infrared light modulation method for increased resistance to ambient light(10,000Lx).
- Small sensor supporting detection at long distances.
- Analog output type that is proportional to the distance to the object.
- Repeat accuracy is high can be detected stable less variation by teaching at the upper.
- Maintenance is easy thanks to the connector equipped with a strong locking feature.
International Standards
- Our products do not have overseas safety regulations such as CE mark, UL standard, EN standard etc.
- Products is compliant to the RoHS directive.
* Please consult about "change of specification" and "request of specification" of the product.
Rating/Performance
Rating / Performance
| Model | PRB-SS-12 | PRB-MS-12 |
|---|---|---|
| Detection Surface | Front side detection | |
| Detection Distance | 500 mm ± 200 mm ( 300 to 700 mm ) |
750 mm ± 250 mm ( 500 to 1000 mm ) |
| Detection Sensitivity | 0.4 V/100 mm (300 to 700mm) | 0.3 V/100 mm (500 to 1000mm) |
| Standard Detection Target |
200 mm × 200 mm Kodak Gray Card 90% reflectance | |
| Power Supply Voltage | 12 V DC (Operating voltage range: 10.8 V to 13.2 V DC) | |
| Power Consumption | 60 mA DC or less | |
| Max Output Voltage | 5.5 V DC or less | |
| Output Impedance | 1 kΩ | |
| Response Time | 100 ms or less | |
| Peak Wavelength | 940nm | |
| Ambient Light Limit | 10000 Lx or less | |
| Linearity | ±8% FS or less (At 25 °C) | |
| Repeat Accuracy | ±3% FS or less (At 25 °C) | |
| Output Characteristics | (The out-of-range, non-linear) Linear output by placing the rated sensing distance within | |
| Operating Temperature Range |
-10 to 55 °C (-10 to 65 °C during storage) (Without dew condensation or freezing) |
|
| Operating Humidity Range |
85% RH or less (90% RH or less during storage)(Without dew condensation) | |
| Load Resistance | 100 kΩ or more | |
| Withstand Voltage | 1 min at 500 V AC 50/60 Hz (Between the live part and case) | |
| Insulation Resistance | 50 MΩ or more measured with an ohmmeter at 500 V DC (Between the live part and case) |
|
| Vibration Resistance | Durability: 2 hours in each X, Y, Z direction at 10 to 55 Hz and with peak-to-peak amplitude of 1.5 mm (At power off) | |
| Shock Resistance | Durability: 3 times at 200 m/s² (approx. 20 G) in each X, Y, Z direction (At power off) |
|
| Protection Rating | IP50 | |
| Case Material | ABS | |
| Connector | Connector: BM03B-GHS (3-pin)(from J.S.T. Mfg. Co., Ltd.) Housing: GHR-03V-S, Contact: SSHL-002T-P0.2 (from J.S.T. Mfg. Co., Ltd.) |
|
| Weight | Approx. 6 g | |
| Options (Sold Separately) |
Connector harness : CNH-GHR03S28-300 | |
External Dimensions Diagram/Connector Harness/Output Circuit
External Dimensions Diagram
Connector Harness (Sold Separately)
Output Circuit
Usage Precautions
-
If there is a structure that should not be detected in front of the sensor detection surface, install the sensor with the light axis shifted approximately 15° from the structure surface.
-
The sensor is pulse-driven. To ensure good performance, install a 100 μF capacitor between the power supply Vcc and GND near the sensor when possible.
- Please use so as to be 35 ° or more relative to the sensor optical axis direct light.
- Please note that it may react to the infrared remote control signal system.
-
Detection distances have been set for each model using a standard detection target of a specific size.The detection distances may decrease with smaller detection targets.The detection distance also varies depending on the target material. Therefore, check the detection distance in advance using the appropriate target, and set the distance taking into account an error margin.
- It is recommended to use black color with low reflectivity for the detection target background.
- See Photoelectric sensors general usage precautions for other precautions.
Distance-Output Voltage Characteristics
Distance-Output Voltage Characteristics (Typical Example)
*After you have put an item in your shopping cart, choose either [Quote] or [Order].
*For customized products or specifications, contact us using "Inquiry."
*Choose the currency from JPY, USD, or EUR.
| Model Name | Detection distance | Standard Price | Inventory Type | Select |
|---|---|---|---|---|
| PRB-SS-12 | 500 mm |
28 USD
26 EUR
|
STD | |
| PRB-MS-12 | 750 mm |
28 USD
26 EUR
|
STD |
STD Shipping is available immediately (on the day of order)
WIP Shipping is available within 1 to 3 weeks
BTO Shipping is available within 10 to 18 weeks
NOTE: The above information shows the typical delivery time. For actual delivery time, please confirm us as it depends on our business days and/or product quantities.
In the case of the quote request and order, please be sure to check the Terms and Conditions.
If you have made the procedure of quote request and order, it assumes that agree to the Terms and Conditions.
