Model MGG-830-N301 8-bit Magnetic Sensor Address for Transfer Machine
- Product catalog download
- 3D PDF Download
- MGG-830-N301 Download the CAD data (DXF / Parasolid / STEP / IGES)
Application
- Automatic guided vehicles guidance
Features
- Regardless of the passing direction of AGV and output the exact address pointer.
- Address of 256 points can be identified by the binary signal of 8BIT.
- There is a magnetic address plate form MG100-1R5-P30B8 (optional). Please use a combination sure.
International Standards
- Our products do not have overseas safety regulations such as CE mark, UL standard, EN standard etc.
- Products is compliant to the RoHS directive.
* Please consult about "change of specification" and "request of specification" of the product.
Rating/Performance/Timing Diagram
Rating / Performance
| Model | MGG-830-N301 | |||
|---|---|---|---|---|
| Detection Surface | Front side detection | |||
| Detection Sensitivity | 300 μT ± 100 μT (With a rubber plate magnet of 30 × 30 × t1.5 mm) | |||
| Power Supply Voltage | 10 V DC or more to 36 V DC or less | |||
| Power Consumption | 100 mA DC or less (With 12 V DC), 50 mA DC or less (With 24 V DC) | |||
| Output | Latch output Nch MOSFET open drain normally open | |||
| Output Residual Voltage | 0.5 V DC or less (Load current 100 mA DC) | |||
| Control Input and Output |
Strobe output signal : One-shot output · 100ms or more Reset input signal : GND Short · 1ms or more |
|||
| Number of Detection Points and Pitch |
8 point / 30 mm | |||
| Number of Address | 8 bit binary code (256 point) | |||
| Response Time | 1 ms or less | |||
| Operating Set Distance | 12 to 28 mm (Magnetic sensor address - Magnetic address plates) | |||
| Data Polarity | N pole | |||
| Circuit Protection | Power reverse connection protection diode, and output surge protection diode | |||
| Operating Temperature Range |
-10 to 60 °C (-20 to 70 °C during storage) (Without dew condensation or freezing) |
|||
| Operating Humidity Range |
95% RH or less (95% RH or less during storage)(Without dew condensation) | |||
| Withstand Voltage | 1 min at 500 V AC or less (Between the live part and installation part) | |||
| Insulation Resistance | 100 MΩ or more measured with an ohmmeter at 500 V DC (Between the live part and installation bracket part) |
|||
| Vibration Resistance | Durability : 2 hours in each X, Y, Z direction at 10 to 55 Hz and with peak-to-peak amplitude of 1.5 mm (At power off) | |||
| Shock Resistance | Durability : 3 times at 500 m/s² (approx. 50 G) in each X, Y, Z direction (At power off) |
|||
| Protection Rating | IP67 (The cable lead-out portion of the sensor, fixed as there is no load and bending) |
|||
| Case Material | Case : ABS, Aluminum plate t1.5 (Anodized aluminum, black) | |||
| Cable | ø8, 12-core round cord of 0.3 mm² and 1 m in length (Oil resistant) | |||
*For a detailed specification of the other, please refer to specifications.
Timing Diagram
Setting with Magnetic Address Plate
External Dimensions Diagram/Output Circuit
External Dimensions Diagram
Output Circuit
Usage Precautions
- Please be sure to use to match the direction of the magnetic sensor address LSB and magnetic address plate of LSB (address No. display section).
- If there is a magnetic material to the mounting portion and the surrounding magnetic address sensors, about 1.5 times more magnetic address sensor and magnetic address plates and release the (about 50mm) distance, please use after confirming the well-detection characteristics.
- The output of the data is the latch output to hold until you enter the reset signal. After the magnetic address sensor is completely away from the magnetic address plate, please reset input.
- If you are using a magnetic address plate is used to specify the address No.. The address is up to 0-255.
- See General usage precautions for automatic guided vehicles electromagnetic sensors for other precautions.
*After you have put an item in your shopping cart, choose either [Quote] or [Order].
*For customized products or specifications, contact us using "Inquiry."
*Choose the currency from JPY, USD, or EUR.
| Model Name | Standard Price | Inventory Type | Select |
|---|---|---|---|
| MGG-830-N301 |
394 USD
365 EUR
|
BTO |
STD Shipping is available immediately (on the day of order)
WIP Shipping is available within 1 to 3 weeks
BTO Shipping is available within 10 to 18 weeks
NOTE: The above information shows the typical delivery time. For actual delivery time, please confirm us as it depends on our business days and/or product quantities.
In the case of the quote request and order, please be sure to check the Terms and Conditions.
If you have made the procedure of quote request and order, it assumes that agree to the Terms and Conditions.
