How It Works Shipping Fee Terms of Use

Model MGP-CW202 Bipolar Detection High-sensitivity Electromagnetic Sensor

Application

  • Magnet detection
  • Automatic guided vehicles guidance

Features

  • Uses a magnetism focusing construction (patented) that makes it particularly strong against ambient temperatures.
  • The magnetism focusing construction is very useful as the sensor can detect at a long distance targets with a wide surface but a weak magnetic flux, like belt-shaped rubber magnets.
  • The detected poles (N pole and S pole) are output separately.
  • Equipped with protection diodes to protect the sensor from reverse connection to the power supply and output surges.
  • The LEDs displaying the operation (red for N pole detection and green for S pole detection) make it easy to grasp the operation condition.

International Standards

  • Our products do not have overseas safety regulations such as CE mark, UL standard, EN standard etc.
  • Products is compliant to the RoHS directive.

* Please consult about "change of specification" and "request of specification" of the product.

Rating/Performance

Rating / Performance

Model MGP-CW202
Detection Surface Front side detection
Detection Sensitivity 2000 μT ± 400 μT
Power Supply Voltage 12 V to 24 V DC (Operating voltage range: 10 V to 30 V DC), Ripple 1% or less
Power Consumption 20 mA DC or less
Output 30 V DC 50 mA DC or less NPN transistor open collector
Output Residual Voltage 1 V DC or less (Load current 50 mA DC)
Operation Configuration Normally open (On with magnetic field)
Operation Display LED : Red with N pole detection, Green with S pole detection
Response Time 300 μs or less
Hysteresis 350 μT or less (With a rubber plate magnet of 30 × 30 × t1.5 mm)
Detection Polarity N pole and S pole
Reference Detection
Distances
25 mm (*The MG40-1R5 series)
Operating Set Distance 5 to 17 mm (*The MG40-1R5 series)
Operating Temperature
Range
-10 to 60 °C (-20 to 65 °C during storage)
(Without dew condensation or freezing)
Operating Humidity
Range
90% RH or less (90% RH or less during storage)(Without dew condensation)
Withstand Voltage 1 min at 500 V AC 50/60 Hz (Between the live part and case)
Insulation Resistance 100 MΩ or more measured with an ohmmeter at 500 V DC
(Between the live part and case)
Vibration Resistance Durability : 2 hours in each X, Y, Z direction at 10 to 55 Hz and with peak-to-peak amplitude of 1.5 mm
(At power off)
Shock Resistance Durability : 3 times at 500 m/s² (approx. 50 G) in each X, Y, Z direction
(At power off)
Protection Rating IP65
Case Material ABS (Nut:ABS/PC composite)
Cable ø4, 4-core round cord of 0.2 mm² and 1 m in length (Oil and heat resistant)
Weight Approx. 30 g

 

External Dimensions Diagram/Output Circuit

External Dimensions Diagram

MGP-CW501_CW202_External_dimensions_diagram.gif

Output Circuit

MGP-CW501_CW202_Output_circuit.gif

Usage Precautions

  1. If there are magnetic objects on or around the installation location of the electromagnetic sensor, keep a distance between the sensor and these objects greater than the distance between the sensor and the magnet tape. Check also carefully the detection characteristics before using the sensor.
  2. If there is magnetic metal with residual magnetism in the surroundings of the electromagnetic sensor installation location, the detection characteristics may greatly vary. Verify the detection characteristics before using the sensor.
  3. Tighten the sensor using the nuts supplied with a torque of 0.5 Nm.
  4. See Electromagnetic sensor general usage precautions for other precautions.

 

Detection Area Diagram

Precautions with Detection Area Diagram and Reverse Polarity Flux (Typical Example)

MGP-CW202_Detection_area_diagram.gif

*After you have put an item in your shopping cart, choose either [Quote] or [Order].
*For customized products or specifications, contact us using "Inquiry."
*Choose the currency from JPY, USD, or EUR.

Model Name Standard Price Inventory Type Select
MGP-CW202
42 USD
39 EUR
STD

STD Shipping is available immediately (on the day of order)

WIP Shipping is available within 1 to 3 weeks

BTO Shipping is available within 10 to 18 weeks

NOTE: The above information shows the typical delivery time. For actual delivery time, please confirm us as it depends on our business days and/or product quantities.

In the case of the quote request and order, please be sure to check the Terms and Conditions.
If you have made the procedure of quote request and order, it assumes that agree to the Terms and Conditions.

Part number index

Product Comparison Table

confirmation of the estimate request content

Electromagnetic sensor

Go to page top