Model MGD-35L Small Electromagnetic Sensor
- Product catalog download
- 3D PDF Download
- MGD-35L Download the CAD data (DXF / Parasolid / STEP / IGES)
Application
- Magnet detection
- The control and detection of the position of the cylinder
Features
- Small flat electromagnetic sensor with a detection surface of 4.7 mm × 6 mm (front side detection) that can be installed easily in small places.
- Does not use any contact point, thus preventing poor contact problems and contact welding caused by wiring capacity.
- Cable connection available on the side or on the top.
- Equipped with a LED to display the operation.
- Two-wire type that can be used the same as the reed switch method (Load resistance required).
International Standards
- Our products do not have overseas safety regulations such as CE mark, UL standard, EN standard etc.
- Products is compliant to the RoHS directive.
* Please consult about "change of specification" and "request of specification" of the product.
Rating/Performance
Rating / Performance
| Model | MGD-35L | |
|---|---|---|
| Detection Surface | Front side detection | |
| Detection Sensitivity | Detection : 4.0 mT (40 G) or more (At the standard point), Reset : 0.5 mT (5 G) or less (At the standard point) | |
| Detection Polarity | N pole and S pole | |
| Power Supply Voltage | 12 V to 24 V DC (Operating voltage range : 10 V to 30 V DC) | |
| Power Consumption | Leakage current : 1 mA DC or less when Off (With 24 V DC, 25°C) | |
| Load Current | 5 to 40 mA DC (At 25 °C) | |
| Output | 2-wire : + Brown, - Blue | |
| Output Residual Voltage | 4 V DC or less (Load current 40 mA DC) (At 25 °C) | |
| Operation Configuration | Normally open (On with magnetic field) | |
| Operation Display | Red LED (Lit when On output) | |
| Response Frequency | 1 kHz or more | |
| Operating Temperature Range |
-10 to 60 °C (-15 to 65 °C during storage) (Without dew condensation or freezing) |
|
| Operating Humidity Range |
95% RH or less (95% RH or less during storage)(Without dew condensation) | |
| Withstand Voltage | 1 min at 1000 V AC 50/60 Hz (Between the live part and case) | |
| Insulation Resistance | 50 MΩ or more measured with an ohmmeter at 500 V DC (Between the live part and case) |
|
| Vibration Resistance | Durability : 2 hours in each X, Y, Z direction at 10 to 55 Hz and with peak-to-peak amplitude of 1.5 mm (At power off) | |
| Shock Resistance | Durability : 10 times at 1000 m/s² (approx. 100 G) in each X, Y, Z direction (At power off) |
|
| Protection Rating | IP67 | |
| Case Material | PBT | |
| Cable | ø3.1, 2-core round cord of 0.2 mm² (Oil and heat resistant) | |
| Cable Direction | Vertical | |
| Weight | Approx. 14 g (1 m in cable length) | |
External Dimensions Diagram/Output Circuit and Connections
External Dimensions Diagram
Output Circuit and Connections
Usage Precautions
- Do not place magnetic metal within 15 mm from the detection surface at the extremity.
- If the object on which the electromagnetic sensor is installed is made of magnetic metal, the detection sensitivity may greatly vary. Ensure sufficient distance with magnetic metal and always verify the detection characteristics before using the sensor.
- If there is magnetic metal with residual magnetism in the surroundings of the electromagnetic sensor installation location, the detection characteristics may greatly vary. Verify the detection characteristics before using the sensor.
- See Electromagnetic sensor general usage precautions for other precautions.
*After you have put an item in your shopping cart, choose either [Quote] or [Order].
*For customized products or specifications, contact us using "Inquiry."
*Choose the currency from JPY, USD, or EUR.
| Model Name | Standard Price | Inventory Type | Select |
|---|---|---|---|
| MGD-35L |
19 USD
17 EUR
|
BTO |
STD Shipping is available immediately (on the day of order)
WIP Shipping is available within 1 to 3 weeks
BTO Shipping is available within 10 to 18 weeks
NOTE: The above information shows the typical delivery time. For actual delivery time, please confirm us as it depends on our business days and/or product quantities.
In the case of the quote request and order, please be sure to check the Terms and Conditions.
If you have made the procedure of quote request and order, it assumes that agree to the Terms and Conditions.
