How It Works Shipping Fee Terms of Use

Model PRA Diffuse Reflection Photoelectric Sensor

Application

  • Bill detection sensor for ATM
  • Held up hand for water around sensor
  • Held up hand for automatic door sensor
  • Automatic door sensor for held up hand
  • Non-contact switch for food factor
  • Paper detection sensor
  • Object detection of production line

Features

  • Uses infrared light modulation method for increased resistance to ambient light (10.000 Lx).
  • Small sensor supporting detection at long distances.
  • The output is an open drain type (Nch MOSFET) that can directly open and close the load,
    which facilitates wiring.

International Standards

  • Our products do not have overseas safety regulations such as CE mark, UL standard, EN standard etc.
  • Products is compliant to the RoHS directive.

* Please consult about "change of specification" and "request of specification" of the product.

Rating/Performance/Detection Distance

Rating / Performance

Model PRA-□- 5 PRA-□- 51 PRA-□- 12 PRA-□- 121 PRA-□- 24 PRA-□- 241
Detection Surface Front side detection
Power Supply Voltage
5 V DC
(Operating voltage range:
4.5 V to 5.5 V DC)
12 V DC
(Operating voltage range:
10.8 V to 13.2 V DC)
24 V DC
(Operating voltage range:
21.6 V to 26.4 V DC)
Power Consumption 20 mA DC or less
Output 30 V DC 100 mA DC or less Nch MOSFET open drain
Output Residual Voltage 1 V DC or less (Load current 100 mA DC)
Operation Configuration Light On
(On when light
goes through)
Dark On
(On when light
is blocked)
Light On
(On when light
goes through)
Dark On
(On when light
is blocked)
Light On
(On when light
goes through)
Dark On
(On when light
is blocked)
Response Time 10 ms or less
Peak Wavelength
940 nm

Ambient Light Limit
10000 Lx or less
Operating Temperature
Range
-10 to 55 °C (-10 to 65 °C during storage)
(Without dew condensation or freezing)
Operating Humidity
Range
85% RH or less (90% RH or less during storage)(Without dew condensation)
Withstand Voltage 1 min at 500 V AC 50/60 Hz (Between the live part and case)
Insulation Resistance 50 MΩ or more measured with an ohmmeter at 500 V DC
(Between the live part and case)
Vibration Resistance Durability: 2 hours in each X, Y, Z direction at 10 to 55 Hz and with peak-to-peak amplitude of 1.5 mm (At power off)
Shock Resistance Durability: 3 times at 200 m/s² (approx. 20 G) in each X, Y, Z direction
(At power off)
Protection Rating IP 50
Case Material ABS
Connector Connector: SM03B-GHS (3-pin)(from J.S.T. Mfg. Co., Ltd.)
Housing: GHR-03V-S, Contact: SSHL-002T-P0.2
(from J.S.T. Mfg. Co., Ltd.)
Weight Approx. 3 g
Options
(Sold Separately)
Connector harness : CNH-GHR03S28-300

*For a detailed specification of the other, please refer to specifications.

Detection Distance

PRA-検出距離.gif

 

External Dimensions Diagram/Connector Harness/Output Circuit

External Dimensions Diagram

ST-PRA_EN-2.png

Connector Harness (Sold Separately)

CNH-GHR03S28-300.gif

Output Circuit

PRA-回路図EN.gif

Usage Precautions

Usage Precautions

  1. If there is a structure that should not be detected in front of the sensor detection surface, install the sensor with
    the light axis shifted approximately 15° from the structure surface.
  2. The sensor is pulse-driven. To ensure good performance, install a 100 μF capacitor between the power supply Vcc
    and GND near the sensor when possible.
  3. Detection distances have been set for each model using a standard detection target of a specific size.
    The detection distances may decrease with smaller detection targets.
    The detection distance also varies depending on the target material. Therefore, check the detection distance
    in advance using the appropriate target, and set the distance taking into account an error margin.
  4. When several photoelectric sensors are used close of each other, leave enough space between them or install light
    interception plates to prevent light interference. Pay also attention to light that may reflect on the floor or the walls.
  5. It is recommended to use black color with low reflectivity for the detection target background.
 

*After you have put an item in your shopping cart, choose either [Quote] or [Order].
*For customized products or specifications, contact us using "Inquiry."
*Choose the currency from JPY, USD, or EUR.

Model Name Operation configuration Detection distance Standard Price Inventory Type Select
PRA-300-5 Photoreceiver and light On 30 mm
12 USD
11 EUR
STD
PRA-500-5 Photoreceiver and light On 50 mm
12 USD
11 EUR
STD
PRA-101-5 Photoreceiver and light On 100 mm
12 USD
11 EUR
BTO
PRA-201-5 Photoreceiver and light On 200 mm
12 USD
11 EUR
STD
PRA-300-51 Photoreceiver and dark On 30 mm
12 USD
11 EUR
STD
PRA-500-51 Photoreceiver and dark On 50 mm
12 USD
11 EUR
STD
PRA-101-51 Photoreceiver and dark On 100 mm
12 USD
11 EUR
STD
PRA-201-51 Photoreceiver and dark On 200 mm
12 USD
11 EUR
STD
Model Name Operation configuration Detection distance Standard Price Inventory Type Select
PRA-300-12 Photoreceiver and light On 30 mm
12 USD
11 EUR
STD
PRA-500-12 Photoreceiver and light On 50 mm
12 USD
11 EUR
STD
PRA-101-12 Photoreceiver and light On 100 mm
12 USD
11 EUR
STD
PRA-201-12 Photoreceiver and light On 200 mm
12 USD
11 EUR
STD
PRA-300-121 Photoreceiver and dark On 30 mm
12 USD
11 EUR
STD
PRA-500-121 Photoreceiver and dark On 50 mm
12 USD
11 EUR
STD
PRA-101-121 Photoreceiver and dark On 100 mm
12 USD
11 EUR
STD
PRA-201-121 Photoreceiver and dark On 200 mm
12 USD
11 EUR
STD
Model Name Operation configuration Detection distance Standard Price Inventory Type Select
PRA-300-24 Photoreceiver and light On 30 mm
12 USD
11 EUR
STD
PRA-500-24 Photoreceiver and light On 50 mm
12 USD
11 EUR
STD
PRA-101-24 Photoreceiver and light On 100 mm
12 USD
11 EUR
STD
PRA-201-24 Photoreceiver and light On 200 mm
12 USD
11 EUR
STD
PRA-300-241 Photoreceiver and dark On 30 mm
12 USD
11 EUR
STD
PRA-500-241 Photoreceiver and dark On 50 mm
12 USD
11 EUR
STD
PRA-101-241 Photoreceiver and dark On 100 mm
12 USD
11 EUR
STD
PRA-201-241 Photoreceiver and dark On 200 mm
12 USD
11 EUR
STD

STD Shipping is available immediately (on the day of order)

WIP Shipping is available within 1 to 3 weeks

BTO Shipping is available within 10 to 18 weeks

NOTE: The above information shows the typical delivery time. For actual delivery time, please confirm us as it depends on our business days and/or product quantities.

In the case of the quote request and order, please be sure to check the Terms and Conditions.
If you have made the procedure of quote request and order, it assumes that agree to the Terms and Conditions.

Quantity:
pieces pieces pieces
  • 2 USD
    2 EUR
  • 2 USD
    2 EUR
  • 2 USD
    2 EUR

To confirm the Request a quote / Order Cart

Go to page top