Model MDS-5T High-sensitivity Inductive Sensor
- Product catalog download
- 3D PDF Download
- Product catalog download
- MDS-5T Download the CAD data (DXF / Parasolid / STEP / IGES)
Application
- Iron sheet detection
- Detection of coins
- Slot medal detection
- Detection of medals level
- Detection of pachinko balls
- Detection of pachinko balls level
Features
- Small flat inductive sensor with a detection surface of 16 mm,
a case of 6 mm in thickness, and a detection distance of 7 to 8 mm
(Upper surface detection type). - Equipped with a small connector for simple mounting and wiring.
- Features a keyway on the case side for an easy mounting in one touch.
- You may also use the mounting bracket (Sold separately).
International Standards
- Our products do not have overseas safety regulations such as CE mark, UL standard, EN standard etc.
- Products is compliant to the RoHS directive.
* Please consult about "change of specification" and "request of specification" of the product.
Rating / Performance / Characteristics Graph
Rating / Performance
| Model | MDS-5T-5 | MDS-5T-12 |
|---|---|---|
| Detection Surface | Upper side detection | |
| Detection Distance | 7.5 mm ± 0.5mm | |
| Hysteresis | 15 % or less of the detection distance | |
| Set Distance | 0 to 6.0 mm | |
| Standard Detection Target | Iron sheet of 20 × 20 mm and 1 mm in thickness | |
| Power Supply Voltage | 5 V DC (Operating voltage range: 4.5 V to 5.5 V DC) |
12 V to 24 V DC (Operating voltage range: 10.8 V to 26.4 V DC) |
| Current Consumption | 2 mA DC or less | 6 mA DC or less |
| Output | 30 V DC 50 mA DC or less NPN transistor open collector | |
| Output Residual Voltage | 1 V DC or less ( Load current 50 mA DC ) | |
| Operation Status | Normally open (ON output when detecting) | |
| Response Frequency | 100 Hz or more | |
| Temperature Range | -20 to 60 °C (-25 to 65 °C storage temperature range) (Without dew condensation or icing) |
|
| Humidity Range | 35 to 85% RH (35 to 85% RH storage humidity range)(Without dew condensation) | |
| Dielectric Strength | 500 V AC for 1minute (Between the live part and case) | |
| Insulation Resistance | 50 MΩ or more at 500 V DC megger (Between the live part and case) | |
| Vibration Resistance | 10 to 55 Hz, 1.5 mm double amplitude in X, Y and Z directions for 2 hours each (at power off) | |
| Shock Resistance | 200 m/s² (Approx. 20 G) in X, Y and Z directions 3 times each (at power off) | |
| Static Electricity Resistance | 15 kV between the external cover and the electrode (C = 500 pF, R = 330 Ω), but only on the detection side | |
| Protection | IP50 | |
| Case Material | ABS | |
| Connector | Connector : S3B-ZR (3-pin)(from J.S.T. Mfg. Co., Ltd.) Housing : ZHR-3, Contact : SZH-002T-P0.5 (from J.S.T. Mfg. Co., Ltd.) |
|
| Weight | Approx. 4 g | |
| Options (Sold Separately) |
Mounting bracket : PMS-5TS, Connector harness : SZH-3-300 | |
*For a detailed specification of the other, please refer to specifications.
Characteristics Graph (Typical Example)
Outline Dimensions/Options/Output Circuit
Outline Dimensions
Mounting Bracket (Sold Separately)
Connector Harness (Sold Separately)
Output Circuit
Precautions During Use
Influence of Surrounding Metal
Do not place metal objects around the inductive sensor,
i.e. within 30 mm from the detection surface,10 mm from the front side, or 5 mm from the sides. Otherwise, the detection distance may increase or other malfunctions may occur.Also, if there are surrounding metals on two or more sides including the side surface, please contact us in advance.
Mutual Interference
If you use a number of the same product,
separate them at least by the distances shown in the figure below to prevent reciprocal interference.
(Sensors with a different frequency are indicated with a B after the model name.)
Mounting Precautions
Note that inductive sensors cannot be used if installed on metal surfaces.
Other
See inductive sensor general Precautions During Use for other precautions.
Reference Operating Sensitivity
Reference Operating Sensitivity
*After you have put an item in your shopping cart, choose either [Quote] or [Order].
*For customized products or specifications, contact us using "Inquiry."
*Choose the currency from JPY, USD, or EUR.
| Model Name | Frequency | Standard Price | Inventory Type | Select |
|---|---|---|---|---|
| MDS-5T-5 | Normal type |
5 USD
5 EUR
|
BTO | |
| MDS-5T-5B | Different frequency type |
5 USD
5 EUR
|
STD |
| Model Name | Frequency | Standard Price | Inventory Type | Select |
|---|---|---|---|---|
| MDS-5T-12 | Normal type |
5 USD
5 EUR
|
STD | |
| MDS-5T-12B | Different frequency type |
5 USD
5 EUR
|
BTO |
STD Shipping is available immediately (on the day of order)
WIP Shipping is available within 1 to 3 weeks
BTO Shipping is available within 10 to 18 weeks
NOTE: The above information shows the typical delivery time. For actual delivery time, please confirm us as it depends on our business days and/or product quantities.
In the case of the quote request and order, please be sure to check the Terms and Conditions.
If you have made the procedure of quote request and order, it assumes that agree to the Terms and Conditions.
