Model MDS-H12CM Pass-Through Type Proximity Sensor for Steel Pachinko Balls (Open Collector Output / Shield Type)
- Product catalog download
- 3D PDF Download
- MDS-H12CM Download the CAD data (DXF / Parasolid / STEP / IGES)
Application
- Detection of steel pachinko balls
Features
- 3-wire pass-through type proximity sensor with open collector output for easy operation.
- The internal condition can be easily checked through the transparent cover.
International Standards
- Our products do not have overseas safety regulations such as CE mark, UL standard, EN standard etc.
- Products is compliant to the RoHS directive.
* Please consult about "change of specification" and "request of specification" of the product.
Rating / Performance / Characteristics
Rating / Performance
| Model | MDS-H12CM-5 | MDS-H12CM-12 |
|---|---|---|
| Range of Detection | 4 to 8 mm (*See Characteristics) | |
| Hysteresis | 20% or less of the detection distance (*See Characteristics) | |
|
Standard Detection
Target
|
Steel pachinko ball (ø11 ± 0.05 mm) | |
| Power Supply Voltage | 5 V DC (Operating voltage range: 4.5 V to 5.5 V DC) |
12 V to 24 V DC (Operating voltage range: 10.8 V to 26.4 V DC) |
| Power Consumption | 10 mA DC or less | |
| Output | NPN transistor open collector normally open 30 V DC 50 mA DC or less | |
| Output Residual Voltage | 1 V DC or less (Load current 50 mA DC) | |
| Operation Configuration | "L" output with detection target (Normally open type) | |
| Resolving Power | Can detect balls coming continuously | |
| Response Frequency | 100Hz or more | |
|
Operating Temperature
Range
|
-10 to 55 °C (Without dew condensation or freezing) | |
|
Operating Humidity
Range
|
35 to 85% RH (Without dew condensation) | |
| Vibration Resistance | Durability: 2 hours in each X, Y, Z direction at 10 to 55 Hz and with peak-to-peak amplitude of 1.5 mm (At power off) | |
| Shock Resistance | Durability: 10 times at 500 m/s² (approx. 50 G) in each X, Y, Z direction (At power off) |
|
| Withstand Voltage | 1 min at 500 V AC 50/60 Hz | |
| Insulation Resistance | 50 MΩ or more measured with an ohmmeter at 500 V DC | |
|
Static Electricity
Resistance
|
15 kV between the external cover (Pachinko ball pass-through hole) and the shield plate (C = 500 pF, R = 330 Ω) | |
| Protection Rating | IP50 | |
| Case Material | ABS | |
| Connector | Connector: S3B-ZR (3-pin)(from J.S.T. Mfg. Co., Ltd.) [Connections] Housing: ZHR-3, Contact: SZH-002T-P0.5 (from J.S.T. Mfg. Co., Ltd.) |
|
| Weight | Approx. 2.5 g | |
| Options (Sold Separately) |
Connector harness : SZH-3-300 | |
*For a detailed specification of the other, please refer to specifications.
Characteristics
- Range of detection
The range of detection is the distance from the point where the output changes to "L"
after a pachinko ball enters from the IN side, to the point where "L" changes to "H".
- Hysteresis
The hysteresis is the distance from the point where the output changes to "L"
after a pachinko ball enters from the IN side,to the point where "L" changes to "H" when the ball moves in the opposite direction.
External Dimensions Diagram / Connector Harness (Sold Separately) / Output Circuit
External Dimensions Diagram
Connector Harness (Sold Separately)
Output Circuit
Usage Precautions
Influence of Surrounding Metal
Do not install metal within 15 mm from the proximity switch detection surface and back side, and within 5 mm from its lateral sides. Otherwise, the detection distance may increase and malfunction may occur.
Mutual Interference
If you use two or more of the same product, separate them at least by the distances shown in the figure bellow,
or use standard products and products with a different frequency alternately to prevent interference.
Precautions During Use
- Ensure to use the sensor after thorough prior evaluations including the operation check, performance check, and reliability check with the sensor incorporated in your product.
- Be sure to contact us first if the product is being considered for use in an application which requires extremely high reliability, where its breakage, malfunction, or operation can be reasonably expected to be, directly or indirectly, a significant threat to human life, or can cause injury, or damage to property, including, but not limited to medical equipment, automobiles, aerospace vehicle instruments, nuclear power control equipment or other equipment or instruments. In normal use, be sure to provide safety measures to avoid secondary disasters to ensure the safe operation of the entire system.
- Avoid use and/or storage of the product in a place where it can be exposed to the following; chemical solutions and corrosive gas; abrupt temperature changes; direct sunlight; vibration or shock. Dew condensation or freezing may affect the product performance.
Other
- Please note that this proximity sensor can detect steel pachinko balls, but not SUS pachinko balls.
Contact us for detection of SUS pachinko balls. - See proximity sensor general usage precautions for other precautions.
*For a detailed specification of the other, please refer to specifications.
Quote / Order
Quote / Order
Please contact our sales.
