Model HTS-30Y Touch Sensor
- Product catalog download
- 3D PDF Download
- HTS-30Y Download the CAD data (DXF / Parasolid / STEP / IGES)
Application
- Touch switch for door knobs
- Elevator switch
- Touch switch for automatic doors
- Touch switch for security purpose
- Seat sensor
- Input switch for electric devices
- Input sensor of amusement equipment
Features
- Open collector output type that can directly output to MCU or other integrated circuits without the need for a specific interface circuit.
- Does not operate by mistake when touched by an object with small electrostatic capacity such as plastic objects or bags.
- Fixed sensitivity to avoid the need for troublesome settings.
- Can withstand human static electricity without any external connection.
- Does not use any contact point to prevent poor contact problems and increase the lifespan.
- Equipped with a contact terminal for the touch electrode. The connection is easy and requires only a screw to set the touch electrode.
International Standards
- Our products do not have overseas safety regulations such as CE mark, UL standard, EN standard etc.
- Products is compliant to the RoHS directive.
* Please consult about "change of specification" and "request of specification" of the product.
Rating/Performance
Rating / Performance
| Model | HTS- 30Y |
HTS- 30Y4 |
HTS- 30Y5 |
HTS- 30Y-1 |
HTS- 30Y4-1 |
HTS- 30Y5-1 |
|---|---|---|---|---|---|---|
| Operating Sensitivity | 30 pF ±6 pF |
40 pF ±8 pF |
50 pF ±10 pF |
30 pF ±6 pF |
40 pF ±8 pF |
50 pF ±10 pF |
| Power Supply Voltage | 5 V to 12 V DC (Operating voltage range: 4.5 V to 14.4 V DC) | |||||
| Power Consumption | At 5 V DC : 4 mA DC or less, At 12 V DC : 15 mA DCor less | |||||
| Output | 14 V DC 50 mA DC or less NPN transistor open collector | |||||
| Output Residual Voltage | 1 V DC or less (Load current 50 mA DC) | |||||
| Operation Configuration | Normally open (On output when touch is detected) |
Normally closed (Off output when touch is detected) |
||||
| Operating Temperature Range |
-20 to 60 °C (-25 to 65 °C during storage) (Without dew condensation or freezing) |
|||||
| Operating Humidity Range |
35 to 85% RH (25 to 85% RH during storage)(Without dew condensation) | |||||
| Static Electricity Resistance |
±20 kV between the contact terminal and GND (500 pF, 0 Ω) | |||||
| Withstand Voltage | 1 min at 500 V AC 50/60 Hz (Between the live part and case) | |||||
| Insulation Resistance | 20 MΩ or more measured with an ohmmeter at 500 V DC (Between the live part and case) |
|||||
| Vibration Resistance | Durability: 2 hours in each X, Y, Z direction at 10 to 55 Hz and with peak-to-peak amplitude of 1.5 mm (At power off) | |||||
| Shock Resistance | Durability: 3 times at 500 m/s² (approx. 50 G) in each X, Y, Z direction (At power off) |
|||||
| Protection Rrating | IP50 | |||||
| Case Material | PBT reinforced with glass-fiber(Natural) | PBT reinforced with glass-fiber(Black) | ||||
| Connector | Connector:S3B-ZR-SM2-TF (3-pin)(from J.S.T. Mfg. Co., Ltd.) [Connections]Housing:ZHR-3, Contact:SZH-002T-P0.5 (from J.S.T. Mfg. Co., Ltd.) |
|||||
| Weight | Approx. 2 g | |||||
| Options (Sold Separately) |
Connector harness : CNH-ZHR03S28-300 | |||||
*For a detailed specification of the other, please refer to specifications.
External Dimensions Diagram/Connector Harness/Output Circuit
External Dimensions Diagram
Connector Harness (Sold Separately)
Output Circuit
Usage Precautions
- The touch (detection) electrode of the touch sensor is connected to the detection circuit. Therefore, it is necessary to ensure sufficient withstand voltage and insulation between the touch sensor power supply and the AC power supply to ensure safety.
- If the sensor is used near a broadcasting station with high output, or if there is strong common-mode noise in the DC power supply because it is also used for a large inverter-fed device, install a capacitor of 0.1 μF or more to the 0 V line to remove the noise to the FG terminal.
- A high-frequency oscillation circuit is used in the touch sensor. Therefore, if several sensors get close or if the same person touches the touch electrodes of several touch sensors at the same time, the detection operation may malfunction due to reciprocal interference. It is recommended to consult with our company since the interference depends on the position and wiring of the touch sensors and the sensor electrodes.
- When using the normally open output type, be sure to use the sensor with the wiring capacity of the output line under 1,000 pF. Otherwise, the charge of the output line may exceed the maximum output current at output drive, resulting in output malfunction.
When a longer output wiring is needed for larger output wiring capacity over 1,000 pF, either add a 100 Ω resistor in series besides the output terminal of the sensor side, or use the normally close output type. - For normally open output type sensors, the output line wiring length should be 5 m or less in order to eliminate the influence of the output drive current capability of the IC used in this sensor and the anti-static performance due to wiring inductance.
- See Touch sensor general usage precautions for other precautions.
*After you have put an item in your shopping cart, choose either [Quote] or [Order].
*For customized products or specifications, contact us using "Inquiry."
*Choose the currency from JPY, USD, or EUR.
| Model Name | Output configuration | Operating sensitivity | Standard Price | Inventory Type | Select |
|---|---|---|---|---|---|
| HTS-30Y | Normally open | 30 pF |
7 USD
6 EUR
|
STD | |
| HTS-30Y4 | Normally open | 40 pF |
7 USD
6 EUR
|
BTO | |
| HTS-30Y5 | Normally open | 50 pF |
7 USD
6 EUR
|
STD | |
| HTS-30Y-1 | Normally closed | 30 pF |
7 USD
6 EUR
|
STD | |
| HTS-30Y4-1 | Normally closed | 40 pF |
7 USD
6 EUR
|
BTO | |
| HTS-30Y5-1 | Normally closed | 50 pF |
7 USD
6 EUR
|
BTO |
STD Shipping is available immediately (on the day of order)
WIP Shipping is available within 1 to 3 weeks
BTO Shipping is available within 10 to 18 weeks
NOTE: The above information shows the typical delivery time. For actual delivery time, please confirm us as it depends on our business days and/or product quantities.
In the case of the quote request and order, please be sure to check the Terms and Conditions.
If you have made the procedure of quote request and order, it assumes that agree to the Terms and Conditions.
