Model PTB-802 Thrubeam Type Photoelectric Sensor
- Product catalog download
- 3D PDF Download
- PTB-802 Download the CAD data (DXF / Parasolid / STEP / IGES)
Application
- Passage detection of people at the automatic ticket gate
- Human body passage detection of the escalator
- Discharge detecting products covered by vending machine
- Object passing detection of production line
- Infrared remote switch
- Platform safety management
- Human sensor of ATM
- Automatic door for human sensor
Features
- Uses infrared light modulation method for increased resistance to ambient light(10,000Lx).
- Small sensor supporting detection at long distances.
- The output is an open drain type (Nch MOSFET) that can directly open and close the load, which facilitates wiring.
- Maintenance is easy thanks to the connector equipped with a strong locking feature.
- This sensor uses "emitter" and "receiver" as a set.
Please note that you can not use "emitter only" or "receiver only".
International Standards
- Our products do not have overseas safety regulations such as CE mark, UL standard, EN standard etc.
- Products is compliant to the RoHS directive.
* Please consult about "change of specification" and "request of specification" of the product.
Rating / Performance
Rating / Performance
| Model | PTB-802 -5L |
PTB-802 -12L |
PTB-802 -5D |
PTB-802 -5D1 |
PTB-802 -12D |
PTB-802 -12D1 |
|
|---|---|---|---|---|---|---|---|
|
Emitter/Receiver
|
Emitter | Photoreceiver | |||||
| Detection Surface | Front side detection | ||||||
| Detection Distance | 8 m | ||||||
| Power Supply Voltage | 5 V DC | 12 V DC | 5 V DC | 12 V DC | |||
| Operating Voltage Range | 4.5 V to 5.5 V DC | 10.8 V to 13.2 V DC | 4.5 V to 5.5 V DC | 10.8 V to 13.2 V DC | |||
| Current Consumption | 50 mA DC or less | 10 mA DC or less | |||||
| Output | - | Nch MOSFET open drain 30 V DC 100 mA DC or less | |||||
| Output Residual Voltage | - | 1 V DC or less (Load current 100 mA DC) | |||||
| Operation Status | - | - | Light On (On when light goes through) |
Dark On (On when light is blocked) |
Light On (On when light goes through) |
Dark On (On when light is blocked) |
|
| Response Time | 100 ms or less | ||||||
|
Peak Wavelength
|
940 nm | ||||||
|
Ambient Light Limit
|
10000 Lx or less | ||||||
|
Temperature Range
|
-10 to 55 °C (-10 to 65 °C storage temperature range) (Without dew condensation or icing) | ||||||
|
Humidity Range
|
85% RH or less (90% RH or less storage humidity range) (Without dew condensation) | ||||||
| Dielectric Strength | 500 V AC for 1 minute (Between the live part and case) | ||||||
| Insulation Resistance | 50 MΩ or more at 500 V DC megger (Between the live part and case) | ||||||
| Vibration Resistance | 10 to 55 Hz, 1.5 mm double amplitude in X, Y and Z directions for 2 hours each (at power off) | ||||||
| Shock Resistance | 200 m/s² (Approx. 20 G) in X, Y and Z directions 3 times each (at power off) | ||||||
| Protection | IP50 | ||||||
| Case Material | ABS | ||||||
| Connector | Connector : BM03B-GHS (3-pin)(from J.S.T. Mfg. Co., Ltd.) [Connections]Housing : GHR-03V-S,Contact: SSHL-002T-P0.2 (from J.S.T. Mfg. Co., Ltd.) |
||||||
| Weight | Approx. 6 g | ||||||
|
Options
(Sold Separately) |
Connector harness : CNH-GHR03S28-300 | ||||||
*For a detailed specification of the other, please refer to specifications.
Outline Dimensions/Connector Harness/Output Circuit
Outline Dimensions
Connector Harness (Sold Separately)
Output Circuit
Precautions During Use
Precautions During Use
-
If there is a structure that should not be detected in front of the sensor detection surface, install the sensor with the light axis shifted approximately 15° from the structure surface.
-
The sensor is pulse-driven. To ensure good performance, install a 100 μF capacitor between the power supply Vcc and GND near the sensor when possible.
- See Photoelectric sensors general usage precautions for other precautions.
*After you have put an item in your shopping cart, choose either [Quote] or [Order].
*For customized products or specifications, contact us using "Inquiry."
*Choose the currency from JPY, USD, or EUR.
| Model Name | Operation configuration | Standard Price | Inventory Type | Select |
|---|---|---|---|---|
| PTB-802-5L | Phototransmitter |
10 USD
10 EUR
|
STD | |
| PTB-802-5D | Photoreceiver and light On |
14 USD
13 EUR
|
STD | |
| PTB-802-5D1 | Photoreceiver and dark On |
14 USD
13 EUR
|
STD |
| Model Name | Operation configuration | Standard Price | Inventory Type | Select |
|---|---|---|---|---|
| PTB-802-12L | Phototransmitter |
10 USD
10 EUR
|
STD | |
| PTB-802-12D | Photoreceiver and light On |
14 USD
13 EUR
|
STD | |
| PTB-802-12D1 | Photoreceiver and dark On |
14 USD
13 EUR
|
WIP |
STD Shipping is available immediately (on the day of order)
WIP Shipping is available within 1 to 3 weeks
BTO Shipping is available within 10 to 18 weeks
NOTE: The above information shows the typical delivery time. For actual delivery time, please confirm us as it depends on our business days and/or product quantities.
In the case of the quote request and order, please be sure to check the Terms and Conditions.
If you have made the procedure of quote request and order, it assumes that agree to the Terms and Conditions.
