Model GLA-1/GLA-5/GLA-X Analog Output Shock Sensor
- Product catalog download
- 3D PDF Download
- GLA-1 Download the CAD data (DXF / Parasolid / STEP / IGES)
Application
- Vibration control for industrial machinery
- Vibration monitoring for electronic devices
- Monitoring of impact on the game console
- Security of mechanical instruments
- Security of structures
Features
- Measurement of impact and output as linear analog values.
- Output a direct current of 0 V to 5 V proportional to the impact (g) generated by an impact frequency of 10 Hz to 1kHz.
- By taking the sensor output to an external comparator IC and adjusting the voltage level of the other input of the comparator IC, it is possible to use the sensor so that the shock sensitivity to be detected can be freely adjusted.
International Standards
- Our products do not have overseas safety regulations such as CE mark, UL standard, EN standard etc.
- Products is compliant to the RoHS directive.
* Please consult about "change of specification" and "request of specification" of the product.
Rating/Performance/Characteristics Graph
Rating / Performance
| Model | GLA-1 | GLA-5 | GLA-X |
|---|---|---|---|
| Detection Sensitivity | 0 to 1 G (At 100 Hz) |
0 to 5 G (At 100 Hz) |
0 to 10 G (At 100 Hz) |
| Power Voltage | 12 V to 24 V DC (Operating voltage range: 10.8 V to 26.4 V DC) | ||
| Power Consumption | 15 mA DC or less | ||
| Output Voltage | 0 to 5 V DC (Max output 6 V DC) | ||
| Output Impedance | 10 kΩ | ||
| Power Supply Reset Time | Approx. 5 seconds | ||
| Detection and Smoothing Delay |
Approx. 0.6 seconds | ||
| Frequency Characteristics | 7 % FS or less within 20 Hz to 800 Hz | ||
| Linearity | 2 % FS or less | ||
| Detection Frequency | 10 Hz to 1 kHz | ||
| Temperature Range | -10 to 60 °C (-15 to 65 °C during storage) (Without dew condensation or freezing) |
||
| Humidity Range | 85 % RH or less (85 % RH or less during storage)(Without dew condensation) | ||
| Breakdown Voltage | 500 V AC, 50/60 Hz for 1 min (Between live parts and the case) | ||
| Insulation Resistance | 20 MΩ or more, at 500 V DC megger (Between live parts and the case) | ||
| Vibration Resistance | Durability : 10 to 55 Hz, Double amplitude: 1.5 mm in X-, Y-, and Z-direction, each 2 hours (Device not powered) |
||
| Shock Resistance | Durability : 500 m/s² (Approx. 50 G) in X-, Y-, and Z-direction, each 3 times (Device not powered) | ||
| Ingress Protection | IP50 | ||
| Case Material | ABS reinforced with glass-fiber | ||
| Connector | Connector : S3B-ZR-SM2-TF (3-pin) (from J.S.T. Mfg. Co., Ltd.) [Connections] Housing: ZHR-3, Contact: SZH-002T-P0.5 (from J.S.T. Mfg. Co., Ltd.) |
||
| Weight | Approx. 8 g | ||
| Options (Sold Separately) |
Connector harness: SZH-3-300 | ||
Reference Frequency Characteristics (Typical Example)
Reference Linearity Characteristics (Typical Example)
Dimensions/Connector Harness/Output Circuit
Dimensions
Connector Harness(Sold Separately)
Output Circuit
Usage Precautions
- Always use plain washers to tighten the case and use a torque of 0.5 N·m or less.
- If the sensor is subject to thermal shocks, its detection sensitivity will differ for the duration of the sudden temperature change. Check the environment before using the sensor.
- Do not use the sensor when stress is applied to the harness attached to its connector, or where the harnessitself is subject to shocks causing it to oscillate. Otherwise, the wires may break or the sensor may malfunction.
- Secure the harness lead out so that it does not oscillate and no stress is applied on it.
- The product can resist during 2000 hours to vibrations of 10 Hz (0.3 g) to 55 Hz (9 g) with a peak-to-peak amplitude of 1.5 mm in the impact detection direction. However, check sufficiently the vibration resistance of the sensor if complex frequencies or large vibrations should be constantly applied to the sensor.
- For other precautions, refer to “General Precautions” for shock sensors.
*After you have put an item in your shopping cart, choose either [Quote] or [Order].
*For customized products or specifications, contact us using "Inquiry."
*Choose the currency from JPY, USD, or EUR.
| Model Name | Detection sensitivity | Standard Price | Inventory Type | Select |
|---|---|---|---|---|
| GLA-1 | 0 to 1 G |
29 USD
27 EUR
|
STD | |
| GLA-5 | 0 to 5 G |
29 USD
27 EUR
|
STD | |
| GLA-X | 0 to 10 G |
29 USD
27 EUR
|
STD |
STD Shipping is available immediately (on the day of order)
WIP Shipping is available within 1 to 3 weeks
BTO Shipping is available within 10 to 18 weeks
NOTE: The above information shows the typical delivery time. For actual delivery time, please confirm us as it depends on our business days and/or product quantities.
In the case of the quote request and order, please be sure to check the Terms and Conditions.
If you have made the procedure of quote request and order, it assumes that agree to the Terms and Conditions.
